Bidirectional Replication between TiDB Clusters

Bidirectional Replication Between TiDB Clusters - 图1

Warning

  • Currently, bidirectional replication is still an experimental feature. It is NOT recommended to use it in the production environment.
  • TiDB Binlog is not compatible with some features introduced in TiDB v5.0 and they cannot be used together. For details, see Notes.
  • Starting from TiDB v7.5.0, technical support for the data replication feature of TiDB Binlog is no longer provided. It is strongly recommended to use TiCDC as an alternative solution for data replication.
  • Although TiDB v7.5.0 still supports the real-time backup and restoration feature of TiDB Binlog, this component will be completely deprecated in future versions. It is recommended to use PITR as an alternative solution for data recovery.

This document describes the bidirectional replication between two TiDB clusters, how the replication works, how to enable it, and how to replicate DDL operations.

User scenario

If you want two TiDB clusters to exchange data changes with each other, TiDB Binlog allows you to do that. For example, you want cluster A and cluster B to replicate data with each other.

Bidirectional Replication Between TiDB Clusters - 图2

Note

The data written to these two clusters must be conflict-free, that is, in the two clusters, the same primary key or the rows with the unique index of the tables must not be modified.

The user scenario is shown as below:

Architect

Implementation details

Mark Table

If the bidirectional replication is enabled between cluster A and cluster B, the data written to cluster A will be replicated to cluster B, and then these data changes will be replicated back to cluster A, which causes an infinite loop of replication. From the figure above, you can see that during the data replication, Drainer marks the binlog events, and filters out the marked events to avoid such a replication loop.

The detailed implementation is described as follows:

  1. Start the TiDB Binlog replication program for each of the two clusters.
  2. When the transaction to be replicated passes through the Drainer of cluster A, this Drainer adds the _drainer_repl_mark table to the transaction, writes this DML event update to the mark table, and replicate this transaction to cluster B.
  3. Cluster B returns binlog events with the _drainer_repl_mark mark table to cluster A. The Drainer of cluster B identifies the mark table with the DML event when parsing the binlog event, and gives up replicating this binlog event to cluster A.

The replication process from cluster B to cluster A is the same as above. The two clusters can be upstream and downstream of each other.

Bidirectional Replication Between TiDB Clusters - 图5

Note

  • When updating the _drainer_repl_mark mark table, data changes are required to generate binlogs.
  • DDL operations are not transactional, so you need to use the one-way replication method to replicate DDL operations. See Replicate DDL operations for details.

Drainer can use a unique ID for each connection to downstream to avoid conflicts. channel_id is used to indicate a channel for bidirectional replication. The two clusters should have the same channel_id configuration (with the same value).

If you add or delete columns in the upstream, there might be extra or missing columns of the data to be replicated to the downstream. Drainer allows this situation by ignoring the extra columns or by inserting default values to the missing columns.

Mark table

The _drainer_repl_mark mark table has the following structure:

  1. CREATE TABLE `_drainer_repl_mark` (
  2. `id` bigint(20) NOT NULL,
  3. `channel_id` bigint(20) NOT NULL DEFAULT '0',
  4. `val` bigint(20) DEFAULT '0',
  5. `channel_info` varchar(64) DEFAULT NULL,
  6. PRIMARY KEY (`id`,`channel_id`)
  7. );

Drainer uses the following SQL statement to update _drainer_repl_mark, which ensures data change and the generation of binlog:

  1. update drainer_repl_mark set val = val + 1 where id = ? && channel_id = ?;

Replicate DDL operations

Because Drainer cannot add the mark table to DDL operations, you can only use the one-way replication method to replicate DDL operations.

For example, if DDL replication is enabled from cluster A to cluster B, then the replication is disabled from cluster B to cluster A. This means that all DDL operations are performed on cluster A.

Bidirectional Replication Between TiDB Clusters - 图6

Note

DDL operations cannot be executed on two clusters at the same time. When a DDL operation is executed, if any DML operation is being executed at the same time or any DML binlog is being replicated, the upstream and downstream table structures of the DML replication might be inconsistent.

Configure and enable bidirectional replication

For bidirectional replication between cluster A and cluster B, assume that all DDL operations are executed on cluster A. On the replication path from cluster A to cluster B, add the following configuration to Drainer:

  1. [syncer]
  2. loopback-control = true
  3. channel-id = 1 # Configures the same ID for both clusters to be replicated.
  4. sync-ddl = true # Enables it if you need to perform DDL replication.
  5. [syncer.to]
  6. # 1 means SyncFullColumn and 2 means SyncPartialColumn.
  7. # If set to SyncPartialColumn, Drainer allows the downstream table
  8. # structure to have more or fewer columns than the data to be replicated
  9. # And remove the STRICT_TRANS_TABLES of the SQL mode to allow fewer columns, and insert zero values to the downstream.
  10. sync-mode = 2
  11. # Ignores the checkpoint table.
  12. [[syncer.ignore-table]]
  13. db-name = "tidb_binlog"
  14. tbl-name = "checkpoint"

On the replication path from cluster B to cluster A, add the following configuration to Drainer:

  1. [syncer]
  2. loopback-control = true
  3. channel-id = 1 # Configures the same ID for both clusters to be replicated.
  4. sync-ddl = false # Disables it if you do not need to perform DDL replication.
  5. [syncer.to]
  6. # 1 means SyncFullColumn and 2 means SyncPartialColumn.
  7. # If set to SyncPartialColumn, Drainer allows the downstream table
  8. # structure to have more or fewer columns than the data to be replicated
  9. # And remove the STRICT_TRANS_TABLES of the SQL mode to allow fewer columns, and insert zero values to the downstream.
  10. sync-mode = 2
  11. # Ignores the checkpoint table.
  12. [[syncer.ignore-table]]
  13. db-name = "tidb_binlog"
  14. tbl-name = "checkpoint"