Configuring Gateway Network Topology

This feature is targeted at developers / expert users and is considered Alpha.

Istio supports the Kubernetes Gateway API and intends to make it the default API for traffic management in the future. The following instructions allow you to choose to use either the Gateway API or the Istio configuration API when configuring traffic management in the mesh. Follow instructions under either the Gateway API or Istio APIs tab, according to your preference.

Note that the Kubernetes Gateway API CRDs do not come installed by default on most Kubernetes clusters, so make sure they are installed before using the Gateway API:

$ kubectl get crd gateways.gateway.networking.k8s.io &> /dev/null || \
  { kubectl apply -f https://github.com/kubernetes-sigs/gateway-api/releases/download/v1.1.0/standard-install.yaml; }

Forwarding external client attributes (IP address, certificate info) to destination workloads

Many applications require knowing the client IP address and certificate information of the originating request to behave properly. Notable cases include logging and audit tools that require the client IP be populated and security tools, such as Web Application Firewalls (WAF), that need this information to apply rule sets properly. The ability to provide client attributes to services has long been a staple of reverse proxies. To forward these client attributes to destination workloads, proxies use the X-Forwarded-For (XFF) and X-Forwarded-Client-Cert (XFCC) headers.

Today’s networks vary widely in nature, but support for these attributes is a requirement no matter what the network topology is. This information should be preserved and forwarded whether the network uses cloud-based Load Balancers, on-premise Load Balancers, gateways that are exposed directly to the internet, gateways that serve many intermediate proxies, and other deployment topologies not specified.

While Istio provides an ingress gateway, given the varieties of architectures mentioned above, reasonable defaults are not able to be shipped that support the proper forwarding of client attributes to the destination workloads. This becomes ever more vital as Istio multicluster deployment models become more common.

For more information on X-Forwarded-For, see the IETF’s RFC.

Configuring network topologies

Configuration of XFF and XFCC headers can be set globally for all gateway workloads via MeshConfig or per gateway using a pod annotation. For example, to configure globally during install or upgrade when using an IstioOperator custom resource:

spec:
  meshConfig:
    defaultConfig:
      gatewayTopology:
        numTrustedProxies: <VALUE>
        forwardClientCertDetails: <ENUM_VALUE>

You can also configure both of these settings by adding the proxy.istio.io/config annotation to the Pod spec of your Istio ingress gateway.

...
  metadata:
    annotations:
      "proxy.istio.io/config": '{"gatewayTopology" : { "numTrustedProxies": <VALUE>, "forwardClientCertDetails": <ENUM_VALUE> } }'

Configuring X-Forwarded-For Headers

Applications rely on reverse proxies to forward client attributes in a request, such as X-Forward-For header. However, due to the variety of network topologies that Istio can be deployed in, you must set the numTrustedProxies to the number of trusted proxies deployed in front of the Istio gateway proxy, so that the client address can be extracted correctly. This controls the value populated by the ingress gateway in the X-Envoy-External-Address header which can be reliably used by the upstream services to access client’s original IP address.

For example, if you have a cloud based Load Balancer and a reverse proxy in front of your Istio gateway, set numTrustedProxies to 2.

Note that all proxies in front of the Istio gateway proxy must parse HTTP traffic and append to the X-Forwarded-For header at each hop. If the number of entries in the X-Forwarded-For header is less than the number of trusted hops configured, Envoy falls back to using the immediate downstream address as the trusted client address. Please refer to the Envoy documentation to understand how X-Forwarded-For headers and trusted client addresses are determined.

Example using X-Forwarded-For capability with httpbin

1. Run the following command to create a file named topology.yaml with numTrustedProxies set to 2 and install Istio:

   $ cat <<EOF > topology.yaml
   apiVersion: install.istio.io/v1alpha1
   kind: IstioOperator
   spec:
     meshConfig:
       defaultConfig:
         gatewayTopology:
           numTrustedProxies: 2
   EOF
   $ istioctl install -f topology.yaml

   If you previously installed an Istio ingress gateway, restart all ingress gateway pods after step 1.

2. Create an httpbin namespace:

   $ kubectl create namespace httpbin
   namespace/httpbin created

3. Set the istio-injection label to enabled for sidecar injection:

   $ kubectl label --overwrite namespace httpbin istio-injection=enabled
   namespace/httpbin labeled

4. Deploy httpbin in the httpbin namespace:

   Zip

   $ kubectl apply -n httpbin -f @samples/httpbin/httpbin.yaml@

5. Deploy a gateway associated with httpbin:

Zip

$ kubectl apply -n httpbin -f @samples/httpbin/httpbin-gateway.yaml@

Zip

$ kubectl apply -n httpbin -f @samples/httpbin/gateway-api/httpbin-gateway.yaml@
$ kubectl wait --for=condition=programmed gtw -n httpbin httpbin-gateway

1. Set a local GATEWAY_URL environmental variable based on your Istio ingress gateway’s IP address:

$ export GATEWAY_URL=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.status.loadBalancer.ingress[0].ip}')

$ export GATEWAY_URL=$(kubectl get gateways.gateway.networking.k8s.io httpbin-gateway -n httpbin -ojsonpath='{.status.addresses[0].value}')

1. Run the following curl command to simulate a request with proxy addresses in the X-Forwarded-For header:

   $ curl -s -H 'X-Forwarded-For: 56.5.6.7, 72.9.5.6, 98.1.2.3' "$GATEWAY_URL/get?show_env=true" | jq '.headers["X-Forwarded-For"][0]'
     "56.5.6.7, 72.9.5.6, 98.1.2.3,10.244.0.1"

In the above example $GATEWAY_URL resolved to 10.244.0.1. This will not be the case in your environment.

The above output shows the request headers that the httpbin workload received. When the Istio gateway received this request, it set the X-Envoy-External-Address header to the second to last (numTrustedProxies: 2) address in the X-Forwarded-For header from your curl command. Additionally, the gateway appends its own IP to the X-Forwarded-For header before forwarding it to the httpbin workload.

Configuring X-Forwarded-Client-Cert Headers

From Envoy’s documentation regarding XFCC:

x-forwarded-client-cert (XFCC) is a proxy header which indicates certificate information of part or all of the clients or proxies that a request has flowed through, on its way from the client to the server. A proxy may choose to sanitize/append/forward the XFCC header before proxying the request.

To configure how XFCC headers are handled, set forwardClientCertDetails in your IstioOperator

apiVersion: install.istio.io/v1alpha1
kind: IstioOperator
spec:
  meshConfig:
    defaultConfig:
      gatewayTopology:
        forwardClientCertDetails: <ENUM_VALUE>

where ENUM_VALUE can be of the following type.

See the Envoy documentation for examples of using this capability.

PROXY Protocol

The PROXY protocol allows for exchanging and preservation of client attributes between TCP proxies, without relying on L7 protocols such as HTTP and the X-Forwarded-For and X-Envoy-External-Address headers. It is intended for scenarios where an external TCP load balancer needs to proxy TCP traffic through an Istio gateway to a backend TCP service and still expose client attributes such as source IP to upstream TCP service endpoints. PROXY protocol can be enabled via EnvoyFilter.

PROXY protocol is only supported for TCP traffic forwarding by Envoy. See the Envoy documentation for more details, along with some important performance caveats.

PROXY protocol should not be used for L7 traffic, or for Istio gateways behind L7 load balancers.

If your external TCP load balancer is configured to forward TCP traffic and use the PROXY protocol, the Istio Gateway TCP listener must also be configured to accept the PROXY protocol. To enable PROXY protocol on all TCP listeners on the gateways, set proxyProtocol in your IstioOperator. For example:

apiVersion: install.istio.io/v1alpha1
kind: IstioOperator
spec:
  meshConfig:
    defaultConfig:
      gatewayTopology:
        proxyProtocol: {}

Alternatively, deploy a gateway with the following pod annotation:

metadata:
  annotations:
    "proxy.istio.io/config": '{"gatewayTopology" : { "proxyProtocol": {} }}'

The client IP is retrieved from the PROXY protocol by the gateway and set (or appended) in the X-Forwarded-For and X-Envoy-External-Address header. Note that the PROXY protocol is mutually exclusive with L7 headers like X-Forwarded-For and X-Envoy-External-Address. When PROXY protocol is used in conjunction with the gatewayTopology configuration, the numTrustedProxies and the received X-Forwarded-For header takes precedence in determining the trusted client addresses, and PROXY protocol client information will be ignored.

Note that the above example only configures the Gateway to accept incoming PROXY protocol TCP traffic - See the Envoy documentation for examples of how to configure Envoy itself to communicate with upstream services using PROXY protocol.