Debugging shared libraries with Visual Studio

In the previous example we discussed how to debug dependencies in Visual Studio, but when using Conan dependencies in a project it is possible that the original build folder and build files don’t exist. Conan packages don’t contain the necessary information for debugging libraries with Visual Studio by default, this information is stored in PDBs that are generated during the compilation of the libraries. When using Conan these PDBs are generated in the build folder, which is only needed during the building of the libraries. For that reason it’s a common operation to clean the Conan cache with conan cache clean to remove the build folder and save disk space.

For these cases where the build folder is not present we created a hook that copies the PDBs generated in the build folder to the package folder. This behavior can’t be forced by default because PDB files are usually larger than the whole package, and it would greatly increase the package sizes.

This section will follow some examples on how to debug a project in different cases to show how users can make use of the PDB hook.

Creating a project and debugging as usual

First we will debug our project as usual, as it is explained in more detail in the previous example We can start building our dependencies from sources as in the previous section, only this time we will build them as shared. To begin with, clone the sources needed for the example from the examples2 repository in GitHub and create the project.

  1. $ git clone https://github.com/conan-io/examples2.git
  2. $ cd examples2/tutorial/consuming_packages/simple_cmake_project
  3. $ conan install . -o="*:shared=True" -s build_type=Debug --build="zlib/*"
  4. ...
  5. Install finished successfully
  6. # CMake presets require CMake>=3.23
  7. $ cmake --preset=conan-default

Note

We will only cover the case where the dependencies are built as shared because the PDBs and how they are linked to the libraries works differently for static libraries.

We can now open the solution compressor.sln to open our project in Visual Studio and debug it as explained in the previous example. Setting a breakpoint in line 22, running the debugger and using the step into will allow us to debug inside our dependency file deflate.c.

Debugging with build files in cache

In this case the original build files were all present so the debugger worked as usual. Next we will see how the debugger works after removing the build files from the Conan cache.

Removing build files from the Conan cache

There are multiple reasons that can cause the build files to not be present after the dependencies are compiled. We will clean our build files from the cache to simulate one of those cases using conan cache clean. The --build flag makes sure that we only remove the build files, as we will need our source files for this example.

  1. $ conan list "zlib/1.2.11:*"
  2. $ conan cache path --folder build zlib/1.2.11:17b26a16efb893750e4481f98a154db2934ead88
  3. $ conan cache clean zlib/1.2.11 --build
  4. $ conan cache path --folder build zlib/1.2.11:17b26a16efb893750e4481f98a154db2934ead88

After closing and reopening our solution in Visual Studio, we can try to debug again. If you try to step into the dependency, with the breakpoint on line 22, you will notice it will directly skip over to the next line as Visual Studio doesn’t have any information on the dependencies to debug.

Installing a hook to copy the PDBs to the package folder

To solve the issue of not having the PDBs in the package folder, we created a hook that copies the PDBs from the build folder to the package folder. The hook is available in the conan-extensions repository. Installing the whole repository will work, but we recommend to only install the hooks folder from the conan-extensions repository with:

  1. $ conan config install https://github.com/conan-io/conan-extensions.git -sf=extensions/hooks -tf=extensions/hooks

The hook is made so it won’t run by default, as it can increase the package size significantly. As explained in the hooks documentation, we need to change the name of our hook to start with hook_. To locate the path where the hook was placed, run the command conan config home to find your local cache path and go to the extensions/hooks folder to rename the _hook_copy_pdbs_to_package.py file. Be aware that this hook will run everytime a package() method is run, to disable the hook just rename the hook back to start with _hook_.

The hook is implemented as a post-package hook, which means that it will execute after the package is created through the package() method of a recipe. This avoids any potential issue, as the order will be as follows:

  • The build() method of the recipe is executed, generating the DLLs and PDBs

  • The package() method of the recipe is executed, copying the necessary files to the package folder (in this case the DLLs but not the PDBs)

  • The hook is executed copying the PDBs from the build folder next to its DLL for every DLL in the package

The hook makes use of the dumpbin tool which is included in the Visual Studio installation. This tool allows us to get information of a DLL, in this case the path where its associated PDB is located. It will be used for every DLL in the package to locate its PDB to copy it to the package folder.

For more information on how PDBs work with Visual and how we used it to create the hook can be found in the hook readme.

Debugging without build files

After installing the hook we will create again the project from sources so the hook can now copy the PDBs to the package folder alongside the package DLLs so they can be found by the debugger.

  1. $ conan install . -o="*:shared=True" -s build_type=Debug --build="zlib/*"
  2. ...
  3. zlib/1.2.11: Calling package()
  4. ...
  5. [HOOK - hook_copy_pdbs_to_package.py] post_package(): PDBs post package hook running
  6. ...
  7. Install finished successfully
  8. # CMake presets require CMake>=3.23
  9. $ cmake --preset=conan-default

Notice that when running the conan install now you will see the outputs of the hook running after the call to package(). To test the hook we can clean the cache again to remove the build files, this includes the sources used to build the library and the PDBs that were originally generated.

  1. $ conan cache clean zlib/1.2.11 --build

Open the solution in Visual Studio again and start the debugger. When you try to step into the dependency in line 22, an error message will pop up telling us the file was not found and it will ask where the file is located. We can close this window and it will give the option to view the disassembly which can be debugged thanks to the PDB. The PDB only contains the debugging information but Visual Studio is missing the source files, so it won’t be able to debug over those as it did initially.

Debugging without build files in cache

Locating the sources path for the debugger

Visual Studio won’t be able to find te source files by itself after deleting the original build files. To be able to debug over the source files, there’s an option to manually set the source folder path so that it’s possible to debug over the source files. This requires that the source files for the dependency exist. In our case we can get the location of this source files by running a `conan cache path.

  1. $ conan cache path --folder source zlib/1.2.11

In case this source path is not present we can use a config to download the sources again.

  1. $ conan install . -o="*:shared=True" -s build_type=Debug -c:a="tools.build:download_source=True"

Once we have the source path we can set it in Visual Studio so the debugger can find the source files. Right click on the solution in the Solution Explorer and select Properties. Go to Debug Source Files in the Common Properties section and add our source path.

Setting source path

Starting the debugger again will allow to step into the code of the dependency as in the first example we did.

Note

If there are patches to the source files we won’t be able to debug over the modified files, as we are using the files from the source folder and the patches are applied in a later step right before being compiled in the build folder.

Any modification to the source files will not allow debugging over them, as Visual Studio does a checksum check, so they need to be the exact same files as when the libraries were compiled.