Route configuration

Configuring route timeouts

You can configure the default timeouts for an existing route when you have services in need of a low timeout, which is required for Service Level Availability (SLA) purposes, or a high timeout, for cases with a slow back end.

Prerequisites

• You need a deployed Ingress Controller on a running cluster.

Procedure

1. Using the oc annotate command, add the timeout to the route:

   $ oc annotate route <route_name> \
       --overwrite haproxy.router.openshift.io/timeout=<timeout><time_unit> (1)

   1	Supported time units are microseconds (us), milliseconds (ms), seconds (s), minutes (m), hours (h), or days (d).

   The following example sets a timeout of two seconds on a route named myroute:

   $ oc annotate route myroute --overwrite haproxy.router.openshift.io/timeout=2s

Enabling HTTP strict transport security

HTTP Strict Transport Security (HSTS) policy is a security enhancement, which ensures that only HTTPS traffic is allowed on the host. Any HTTP requests are dropped by default. This is useful for ensuring secure interactions with websites, or to offer a secure application for the user’s benefit.

When HSTS is enabled, HSTS adds a Strict Transport Security header to HTTPS responses from the site. You can use the insecureEdgeTerminationPolicy value in a route to redirect to send HTTP to HTTPS. However, when HSTS is enabled, the client changes all requests from the HTTP URL to HTTPS before the request is sent, eliminating the need for a redirect. This is not required to be supported by the client, and can be disabled by setting max-age=0.

Procedure

• To enable HSTS on a route, add the haproxy.router.openshift.io/hsts_header value to the edge terminated or re-encrypt route:

  apiVersion: v1
  kind: Route
  metadata:
    annotations:
      haproxy.router.openshift.io/hsts_header: max-age=31536000;includeSubDomains;preload   (1) (2) (3)

  1	max-age is the only required parameter. It measures the length of time, in seconds, that the HSTS policy is in effect. The client updates max-age whenever a response with a HSTS header is received from the host. When max-age times out, the client discards the policy.
  2	includeSubDomains is optional. When included, it tells the client that all subdomains of the host are to be treated the same as the host.
  3	preload is optional. When max-age is greater than 0, then including preload in haproxy.router.openshift.io/hsts_header allows external services to include this site in their HSTS preload lists. For example, sites such as Google can construct a list of sites that have preload set. Browsers can then use these lists to determine which sites they can communicate with over HTTPS, before they have interacted with the site. Without preload set, browsers must have interacted with the site over HTTPS to get the header.

Troubleshooting throughput issues

Sometimes applications deployed through OKD can cause network throughput issues such as unusually high latency between specific services.

Use the following methods to analyze performance issues if pod logs do not reveal any cause of the problem:

• Use a packet analyzer, such as ping or tcpdump to analyze traffic between a pod and its node.

  For example, run the tcpdump tool on each pod while reproducing the behavior that led to the issue. Review the captures on both sides to compare send and receive timestamps to analyze the latency of traffic to and from a pod. Latency can occur in OKD if a node interface is overloaded with traffic from other pods, storage devices, or the data plane.

  $ tcpdump -s 0 -i any -w /tmp/dump.pcap host <podip 1> && host <podip 2> (1)

  1	podip is the IP address for the pod. Run the oc get pod <pod_name> -o wide command to get the IP address of a pod.

  tcpdump generates a file at /tmp/dump.pcap containing all traffic between these two pods. Ideally, run the analyzer shortly before the issue is reproduced and stop the analyzer shortly after the issue is finished reproducing to minimize the size of the file. You can also run a packet analyzer between the nodes (eliminating the SDN from the equation) with:

  $ tcpdump -s 0 -i any -w /tmp/dump.pcap port 4789

• Use a bandwidth measuring tool, such as iperf, to measure streaming throughput and UDP throughput. Run the tool from the pods first, then from the nodes, to locate any bottlenecks.

Using cookies to keep route statefulness

OKD provides sticky sessions, which enables stateful application traffic by ensuring all traffic hits the same endpoint. However, if the endpoint pod terminates, whether through restart, scaling, or a change in configuration, this statefulness can disappear.

OKD can use cookies to configure session persistence. The Ingress controller selects an endpoint to handle any user requests, and creates a cookie for the session. The cookie is passed back in the response to the request and the user sends the cookie back with the next request in the session. The cookie tells the Ingress Controller which endpoint is handling the session, ensuring that client requests use the cookie so that they are routed to the same pod.

Annotating a route with a cookie

You can set a cookie name to overwrite the default, auto-generated one for the route. This allows the application receiving route traffic to know the cookie name. By deleting the cookie it can force the next request to re-choose an endpoint. So, if a server was overloaded it tries to remove the requests from the client and redistribute them.

Procedure

1. Annotate the route with the specified cookie name:

   $ oc annotate route <route_name> router.openshift.io/cookie_name="<cookie_name>"

   where:

   <route_name>

   Specifies the name of the route.

   <cookie_name>

   Specifies the name for the cookie.

   For example, to annotate the route my_route with the cookie name my_cookie:

   $ oc annotate route my_route router.openshift.io/cookie_name="my_cookie"

2. Capture the route hostname in a variable:

   $ ROUTE_NAME=$(oc get route <route_name> -o jsonpath='{.spec.host}')

   where:

   <route_name>

   Specifies the name of the route.

3. Save the cookie, and then access the route:

   $ curl $ROUTE_NAME -k -c /tmp/cookie_jar

   Use the cookie saved by the previous command when connecting to the route:

   $ curl $ROUTE_NAME -k -b /tmp/cookie_jar

Path-based routes

Path-based routes specify a path component that can be compared against a URL, which requires that the traffic for the route be HTTP based. Thus, multiple routes can be served using the same hostname, each with a different path. Routers should match routes based on the most specific path to the least. However, this depends on the router implementation.

The following table shows example routes and their accessibility:

An unsecured route with a path

apiVersion: v1
kind: Route
metadata:
  name: route-unsecured
spec:
  host: www.example.com
  path: "/test" (1)
  to:
    kind: Service
    name: service-name

Route-specific annotations

The Ingress Controller can set the default options for all the routes it exposes. An individual route can override some of these defaults by providing specific configurations in its annotations. Red Hat does not support adding a route annotation to an operator-managed route.

Router timeout variables

TimeUnits are represented by a number followed by the unit: us *(microseconds), ms (milliseconds, default), s (seconds), m (minutes), h *(hours), d (days).

The regular expression is: [1-9][0-9]*(us\|ms\|s\|m\|h\|d).

A route setting custom timeout

apiVersion: v1
kind: Route
metadata:
  annotations:
    haproxy.router.openshift.io/timeout: 5500ms (1)
...

A route that allows only one specific IP address

metadata:
  annotations:
    haproxy.router.openshift.io/ip_whitelist: 192.168.1.10

A route that allows several IP addresses

metadata:
  annotations:
    haproxy.router.openshift.io/ip_whitelist: 192.168.1.10 192.168.1.11 192.168.1.12

A route that allows an IP address CIDR network

metadata:
  annotations:
    haproxy.router.openshift.io/ip_whitelist: 192.168.1.0/24

A route that allows both IP an address and IP address CIDR networks

metadata:
  annotations:
    haproxy.router.openshift.io/ip_whitelist: 180.5.61.153 192.168.1.0/24 10.0.0.0/8

A route specifying a rewrite target

apiVersion: v1
kind: Route
metadata:
  annotations:
    haproxy.router.openshift.io/rewrite-target: / (1)
...

Setting the haproxy.router.openshift.io/rewrite-target annotation on a route specifies that the Ingress Controller should rewrite paths in HTTP requests using this route before forwarding the requests to the backend application. The part of the request path that matches the path specified in spec.path is replaced with the rewrite target specified in the annotation.

The following table provides examples of the path rewriting behavior for various combinations of spec.path, request path, and rewrite target.

Configuring the route admission policy

Administrators and application developers can run applications in multiple namespaces with the same domain name. This is for organizations where multiple teams develop microservices that are exposed on the same hostname.

Prerequisites

• Cluster administrator privileges.

Procedure

• Edit the .spec.routeAdmission field of the ingresscontroller resource variable using the following command:

  $ oc -n openshift-ingress-operator patch ingresscontroller/default --patch '{"spec":{"routeAdmission":{"namespaceOwnership":"InterNamespaceAllowed"}}}' --type=merge

  Sample Ingress Controller configuration

  spec:
    routeAdmission:
      namespaceOwnership: InterNamespaceAllowed
  ...

Creating a route through an Ingress object

Some ecosystem components have an integration with Ingress resources but not with route resources. To cover this case, OKD automatically creates managed route objects when an Ingress object is created. These route objects are deleted when the corresponding Ingress objects are deleted.

Procedure

1. Define an Ingress object in the OKD console or by entering the oc create command:

   YAML Definition of an Ingress

   apiVersion: networking.k8s.io/v1
   kind: Ingress
   metadata:
     name: frontend
     annotations:
       route.openshift.io/termination: "reencrypt" (1)
   spec:
     rules:
     - host: www.example.com
       http:
         paths:
         - backend:
             serviceName: frontend
             servicePort: 443
     tls:
     - hosts:
       - www.example.com
       secretName: example-com-tls-certificate

   1

   The route.openshift.io/termination annotation can be used to configure the spec.tls.termination field of the Route as Ingress has no field for this. The accepted values are edge, passthrough and reencrypt. All other values are silently ignored. When unset, edge is used. If you specify the passthrough value in the route.openshift.io/termination annotation, set path to ‘’ and pathType to ImplementationSpecific in the spec: spec: rules: - host: www.example.com http: paths: - path: ‘’ pathType: ImplementationSpecific - backend: serviceName: frontend servicePort: 443

   $ oc apply -f ingress.yaml

2. List your routes:

   $ oc get routes

   The result includes an autogenerated route whose name starts with frontend-:

   NAME             HOST/PORT         PATH    SERVICES    PORT    TERMINATION          WILDCARD
   frontend-gnztq   www.example.com           frontend    443     reencrypt/Redirect   None

   If you inspect this route, it looks this:

   YAML Definition of an autogenerated route

   apiVersion: route.openshift.io/v1
   kind: Route
   metadata:
     name: frontend-gnztq
     ownerReferences:
     - apiVersion: networking.k8s.io/v1
       controller: true
       kind: Ingress
       name: frontend
       uid: 4e6c59cc-704d-4f44-b390-617d879033b6
   spec:
     host: www.example.com
     to:
       kind: Service
       name: frontend
     tls:
       certificate: |
         -----BEGIN CERTIFICATE-----
         [...]
         -----END CERTIFICATE-----
       insecureEdgeTerminationPolicy: Redirect
       key: |
         -----BEGIN RSA PRIVATE KEY-----
         [...]
         -----END RSA PRIVATE KEY-----
       termination: reencrypt