Installing the Migration Toolkit for Containers in a restricted network environment

You can install the Migration Toolkit for Containers (MTC) on OKD 4 in a restricted network environment by performing the following procedures:

1. Create a mirrored Operator catalog.

   This process creates a mapping.txt file, which contains the mapping between the registry.redhat.io image and your mirror registry image. The mapping.txt file is required for installing the legacy Migration Toolkit for Containers Operator on an OKD 4.2 to 4.5 source cluster.

2. Install the Migration Toolkit for Containers Operator on the OKD 4.6 target cluster by using Operator Lifecycle Manager.

   By default, the MTC web console and the Migration Controller pod run on the target cluster. You can configure the Migration Controller custom resource manifest to run the MTC web console and the Migration Controller pod on a remote cluster.

3. Install the Migration Toolkit for Containers Operator on the source cluster:

   • OKD 4.6 or later: Install the Migration Toolkit for Containers Operator by using Operator Lifecycle Manager.

   • OKD 4.2 to 4.5: Install the legacy Migration Toolkit for Containers Operator from the command line interface.

4. Configure object storage to use as a replication repository.

Compatibility guidelines

You must install the Migration Toolkit for Containers (MTC) version that is compatible with your OKD version.

You cannot install MTC 1.6.x on OKD versions 3.7 to 4.5 because the custom resource definition API versions are incompatible.

You can migrate workloads from a source cluster with MTC 1.5.1 to a target cluster with MTC 1.6.x as long as the MigrationController custom resource and the MTC web console are running on the target cluster.

1 Latest z-stream release.

Installing the Migration Toolkit for Containers Operator on OKD 4.6

You install the Migration Toolkit for Containers Operator on OKD 4.6 by using the Operator Lifecycle Manager.

Prerequisites

• You must be logged in as a user with cluster-admin privileges on all clusters.

• You must create an Operator catalog from a mirror image in a local registry.

Procedure

1. In the OKD web console, click Operators → OperatorHub.

2. Use the Filter by keyword field to find the Migration Toolkit for Containers Operator.

3. Select the Migration Toolkit for Containers Operator and click Install.

4. Click Install.

   On the Installed Operators page, the Migration Toolkit for Containers Operator appears in the openshift-migration project with the status Succeeded.

5. Click Migration Toolkit for Containers Operator.

6. Under Provided APIs, locate the Migration Controller tile, and click Create Instance.

7. Click Create.

8. Click Workloads → Pods to verify that the MTC pods are running.

Installing the legacy Migration Toolkit for Containers Operator on OKD 4.2 to 4.5

You can install the legacy Migration Toolkit for Containers Operator manually on OKD versions 4.2 to 4.5.

Prerequisites

• You must be logged in as a user with cluster-admin privileges on all clusters.

• You must have access to registry.redhat.io.

• You must have podman installed.

• You must have a Linux workstation with network access in order to download files from registry.redhat.io.

• You must create a mirror image of the Operator catalog.

• You must install the Migration Toolkit for Containers Operator from the mirrored Operator catalog on OKD 4.6.

Procedure

1. Log in to registry.redhat.io with your Red Hat Customer Portal credentials:

   $ sudo podman login registry.redhat.io

2. Download the operator.yml file:

   $ sudo podman cp $(sudo podman create \
     registry.redhat.io/rhmtc/openshift-migration-legacy-rhel8-operator:v1.5.1):/operator.yml ./

3. Download the controller.yml file:

   $ sudo podman cp $(sudo podman create \
     registry.redhat.io/rhmtc/openshift-migration-legacy-rhel8-operator:v1.5.1):/controller.yml ./

4. Obtain the Operator image mapping by running the following command:

   $ grep openshift-migration-legacy-rhel8-operator ./mapping.txt | grep rhmtc

   The mapping.txt file was created when you mirrored the Operator catalog. The output shows the mapping between the registry.redhat.io image and your mirror registry image.

   Example output

   registry.redhat.io/rhmtc/openshift-migration-legacy-rhel8-operator@sha256:468a6126f73b1ee12085ca53a312d1f96ef5a2ca03442bcb63724af5e2614e8a=<registry.apps.example.com>/rhmtc/openshift-migration-legacy-rhel8-operator

5. Update the image values for the ansible and operator containers and the REGISTRY value in the operator.yml file:

   containers:
     - name: ansible
       image: <registry.apps.example.com>/rhmtc/openshift-migration-legacy-rhel8-operator@sha256:<468a6126f73b1ee12085ca53a312d1f96ef5a2ca03442bcb63724af5e2614e8a> (1)
   ...
     - name: operator
       image: <registry.apps.example.com>/rhmtc/openshift-migration-legacy-rhel8-operator@sha256:<468a6126f73b1ee12085ca53a312d1f96ef5a2ca03442bcb63724af5e2614e8a> (1)
   ...
       env:
       - name: REGISTRY
         value: <registry.apps.example.com> (2)

   1	Specify your mirror registry and the sha256 value of the Operator image.
   2	Specify your mirror registry.

6. Log in to your OKD 3 cluster.

7. Create the Migration Toolkit for Containers Operator object:

   $ oc create -f operator.yml

   Example output

   namespace/openshift-migration created
   rolebinding.rbac.authorization.k8s.io/system:deployers created
   serviceaccount/migration-operator created
   customresourcedefinition.apiextensions.k8s.io/migrationcontrollers.migration.openshift.io created
   role.rbac.authorization.k8s.io/migration-operator created
   rolebinding.rbac.authorization.k8s.io/migration-operator created
   clusterrolebinding.rbac.authorization.k8s.io/migration-operator created
   deployment.apps/migration-operator created
   Error from server (AlreadyExists): error when creating "./operator.yml":
   rolebindings.rbac.authorization.k8s.io "system:image-builders" already exists (1)
   Error from server (AlreadyExists): error when creating "./operator.yml":
   rolebindings.rbac.authorization.k8s.io "system:image-pullers" already exists

   1	You can ignore Error from server (AlreadyExists) messages. They are caused by the Migration Toolkit for Containers Operator creating resources for earlier versions of OKD 3 that are provided in later releases.

8. Create the MigrationController object:

   $ oc create -f controller.yml

9. Verify that the MTC pods are running:

   $ oc get pods -n openshift-migration

Configuring proxies

For OKD 4.1 and earlier versions, you must configure proxies in the MigrationController custom resource (CR) manifest after you install the Migration Toolkit for Containers Operator because these versions do not support a cluster-wide proxy object.

For OKD 4.2 to 4.6, the Migration Toolkit for Containers (MTC) inherits the cluster-wide proxy settings. You can change the proxy parameters if you want to override the cluster-wide proxy settings.

You must configure the proxies to allow the SPDY protocol and to forward the Upgrade HTTP header to the API server. Otherwise, an Upgrade request required error is displayed. The MigrationController CR uses SPDY to run commands within remote pods. The Upgrade HTTP header is required in order to open a websocket connection with the API server.

Direct volume migration

If you are performing a direct volume migration (DVM) from a source cluster behind a proxy, you must configure an Stunnel proxy. Stunnel creates a transparent tunnel between the source and target clusters for the TCP connection without changing the certificates.

DVM supports only one proxy. The source cluster cannot access the route of the target cluster if the target cluster is also behind a proxy.

Prerequisites

• You must be logged in as a user with cluster-admin privileges on all clusters.

Procedure

1. Get the MigrationController CR manifest:

   $ oc get migrationcontroller <migration_controller> -n openshift-migration

2. Update the proxy parameters:

   apiVersion: migration.openshift.io/v1alpha1
   kind: MigrationController
   metadata:
     name: <migration_controller>
     namespace: openshift-migration
   ...
   spec:
     stunnel_tcp_proxy: http://<username>:<password>@<ip>:<port> (1)
     httpProxy: http://<username>:<password>@<ip>:<port> (2)
     httpsProxy: http://<username>:<password>@<ip>:<port> (3)
     noProxy: example.com (4)

   1	Stunnel proxy URL for direct volume migration.
   2	Proxy URL for creating HTTP connections outside the cluster. The URL scheme must be http.
   3	Proxy URL for creating HTTPS connections outside the cluster. If this is not specified, then httpProxy is used for both HTTP and HTTPS connections.
   4	Comma-separated list of destination domain names, domains, IP addresses, or other network CIDRs to exclude proxying.

   Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass proxy for all destinations. If you scale up workers that are not included in the network defined by the networking.machineNetwork[].cidr field from the installation configuration, you must add them to this list to prevent connection issues.

   This field is ignored if neither the httpProxy nor the httpsProxy field is set.

3. Save the manifest as migration-controller.yaml.

4. Apply the updated manifest:

   $ oc replace -f migration-controller.yaml -n openshift-migration

For more information, see Configuring the cluster-wide proxy.

Configuring a replication repository

The Multicloud Object Gateway is the only supported option for a restricted network environment.

MTC supports the file system and snapshot data copy methods for migrating data from the source cluster to the target cluster. You can select a method that is suited for your environment and is supported by your storage provider.

Prerequisites

• All clusters must have uninterrupted network access to the replication repository.

• If you use a proxy server with an internally hosted replication repository, you must ensure that the proxy allows access to the replication repository.

Configuring the Multicloud Object Gateway

You can configure the Multicloud Object Gateway (MCG) as a replication repository for the Migration Toolkit for Containers (MTC). MCG is a component of OpenShift Container Storage.

Prerequisites

• Ensure that you have downloaded the pull secret from the Red Hat OpenShift Cluster Manager site as shown in Obtaining the installation program in the installation documentation for your platform.

  If you have the pull secret, add the redhat-operators catalog to the OperatorHub custom resource (CR) as shown in Configuring OKD to use Red Hat Operators.

Procedure

1. Deploy OpenShift Container Storage by using the appropriate OpenShift Container Storage deployment guide.

2. Obtain the S3 endpoint, AWS_ACCESS_KEY_ID, and AWS_SECRET_ACCESS_KEY by running the describe command on the NooBaa custom resource.

   These values are required in order to add MCG as a replication repository to the MTC web console.

Additional resources for configuring a replication repository

• Disconnected environment in the Red Hat OpenShift Container Storage documentation.

• MTC workflow

• About data copy methods

• Adding a replication repository to the MTC web console :installing-mtc-restricted!: