Configure Quality of Service for Pods

This page shows how to configure Pods so that they will be assigned particular Quality of Service (QoS) classes. Kubernetes uses QoS classes to make decisions about evicting Pods when Node resources are exceeded.

When Kubernetes creates a Pod it assigns one of these QoS classes to the Pod:

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

You also need to be able to create and delete namespaces.

Create a namespace

Create a namespace so that the resources you create in this exercise are isolated from the rest of your cluster.

  1. kubectl create namespace qos-example

Create a Pod that gets assigned a QoS class of Guaranteed

For a Pod to be given a QoS class of Guaranteed:

  • Every Container in the Pod must have a memory limit and a memory request.
  • For every Container in the Pod, the memory limit must equal the memory request.
  • Every Container in the Pod must have a CPU limit and a CPU request.
  • For every Container in the Pod, the CPU limit must equal the CPU request.

These restrictions apply to init containers and app containers equally. Ephemeral containers cannot define resources so these restrictions do not apply.

Here is a manifest for a Pod that has one Container. The Container has a memory limit and a memory request, both equal to 200 MiB. The Container has a CPU limit and a CPU request, both equal to 700 milliCPU:

  1. pods/qos/qos-pod.yaml
  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: qos-demo
  5. namespace: qos-example
  6. spec:
  7. containers:
  8. - name: qos-demo-ctr
  9. image: nginx
  10. resources:
  11. limits:
  12. memory: "200Mi"
  13. cpu: "700m"
  14. requests:
  15. memory: "200Mi"
  16. cpu: "700m"

Create the Pod:

  1. kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod.yaml --namespace=qos-example

View detailed information about the Pod:

  1. kubectl get pod qos-demo --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of Guaranteed. The output also verifies that the Pod Container has a memory request that matches its memory limit, and it has a CPU request that matches its CPU limit.

  1. spec:
  2. containers:
  3. ...
  4. resources:
  5. limits:
  6. cpu: 700m
  7. memory: 200Mi
  8. requests:
  9. cpu: 700m
  10. memory: 200Mi
  11. ...
  12. status:
  13. qosClass: Guaranteed

Note:

If a Container specifies its own memory limit, but does not specify a memory request, Kubernetes automatically assigns a memory request that matches the limit. Similarly, if a Container specifies its own CPU limit, but does not specify a CPU request, Kubernetes automatically assigns a CPU request that matches the limit.

Clean up

Delete your Pod:

  1. kubectl delete pod qos-demo --namespace=qos-example

Create a Pod that gets assigned a QoS class of Burstable

A Pod is given a QoS class of Burstable if:

  • The Pod does not meet the criteria for QoS class Guaranteed.
  • At least one Container in the Pod has a memory or CPU request or limit.

Here is a manifest for a Pod that has one Container. The Container has a memory limit of 200 MiB and a memory request of 100 MiB.

  1. pods/qos/qos-pod-2.yaml
  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: qos-demo-2
  5. namespace: qos-example
  6. spec:
  7. containers:
  8. - name: qos-demo-2-ctr
  9. image: nginx
  10. resources:
  11. limits:
  12. memory: "200Mi"
  13. requests:
  14. memory: "100Mi"

Create the Pod:

  1. kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod-2.yaml --namespace=qos-example

View detailed information about the Pod:

  1. kubectl get pod qos-demo-2 --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of Burstable:

  1. spec:
  2. containers:
  3. - image: nginx
  4. imagePullPolicy: Always
  5. name: qos-demo-2-ctr
  6. resources:
  7. limits:
  8. memory: 200Mi
  9. requests:
  10. memory: 100Mi
  11. ...
  12. status:
  13. qosClass: Burstable

Clean up

Delete your Pod:

  1. kubectl delete pod qos-demo-2 --namespace=qos-example

Create a Pod that gets assigned a QoS class of BestEffort

For a Pod to be given a QoS class of BestEffort, the Containers in the Pod must not have any memory or CPU limits or requests.

Here is a manifest for a Pod that has one Container. The Container has no memory or CPU limits or requests:

  1. pods/qos/qos-pod-3.yaml
  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: qos-demo-3
  5. namespace: qos-example
  6. spec:
  7. containers:
  8. - name: qos-demo-3-ctr
  9. image: nginx

Create the Pod:

  1. kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod-3.yaml --namespace=qos-example

View detailed information about the Pod:

  1. kubectl get pod qos-demo-3 --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of BestEffort:

  1. spec:
  2. containers:
  3. ...
  4. resources: {}
  5. ...
  6. status:
  7. qosClass: BestEffort

Clean up

Delete your Pod:

  1. kubectl delete pod qos-demo-3 --namespace=qos-example

Create a Pod that has two Containers

Here is a manifest for a Pod that has two Containers. One container specifies a memory request of 200 MiB. The other Container does not specify any requests or limits.

  1. pods/qos/qos-pod-4.yaml
  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: qos-demo-4
  5. namespace: qos-example
  6. spec:
  7. containers:
  8. - name: qos-demo-4-ctr-1
  9. image: nginx
  10. resources:
  11. requests:
  12. memory: "200Mi"
  13. - name: qos-demo-4-ctr-2
  14. image: redis

Notice that this Pod meets the criteria for QoS class Burstable. That is, it does not meet the criteria for QoS class Guaranteed, and one of its Containers has a memory request.

Create the Pod:

  1. kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod-4.yaml --namespace=qos-example

View detailed information about the Pod:

  1. kubectl get pod qos-demo-4 --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of Burstable:

  1. spec:
  2. containers:
  3. ...
  4. name: qos-demo-4-ctr-1
  5. resources:
  6. requests:
  7. memory: 200Mi
  8. ...
  9. name: qos-demo-4-ctr-2
  10. resources: {}
  11. ...
  12. status:
  13. qosClass: Burstable

Retrieve the QoS class for a Pod

Rather than see all the fields, you can view just the field you need:

  1. kubectl --namespace=qos-example get pod qos-demo-4 -o jsonpath='{ .status.qosClass}{"\n"}'
  1. Burstable

Clean up

Delete your namespace:

  1. kubectl delete namespace qos-example

What’s next

For app developers

For cluster administrators