Communicating with Downstream User Clusters

This section describes how Rancher provisions and manages the downstream user clusters that run your apps and services.

The below diagram shows how the cluster controllers, cluster agents, and node agents allow Rancher to control downstream clusters.

Communicating with Downstream Clusters

The following descriptions correspond to the numbers in the diagram above:

The Authentication Proxy
Cluster Controllers and Cluster Agents
Node Agents
Authorized Cluster Endpoint

1. The Authentication Proxy

In this diagram, a user named Bob wants to see all pods running on a downstream user cluster called User Cluster 1. From within Rancher, he can run a kubectl command to see the pods. Bob is authenticated through Rancher’s authentication proxy.

The authentication proxy forwards all Kubernetes API calls to downstream clusters. It integrates with authentication services like local authentication, Active Directory, and GitHub. On every Kubernetes API call, the authentication proxy authenticates the caller and sets the proper Kubernetes impersonation headers before forwarding the call to Kubernetes masters.

Rancher communicates with Kubernetes clusters using a service account. Each user account in Rancher correlates with an equivalent service account in the downstream cluster. Rancher uses the service account to impersonate the user, which provides all the permissions the user is intended to have.

By default, Rancher generates a kubeconfig file that contains credentials for proxying through the Rancher server to connect to the Kubernetes API server on a downstream user cluster. The kubeconfig file (kube_config_rancher-cluster.yml) contains full access to the cluster.

2. Cluster Controllers and Cluster Agents

Each downstream user cluster has a cluster agent, which opens a tunnel to the corresponding cluster controller within the Rancher server.

There is one cluster controller and one cluster agent for each downstream cluster. Each cluster controller:

Watches for resource changes in the downstream cluster
Brings the current state of the downstream cluster to the desired state
Configures access control policies to clusters and projects
Provisions clusters by calling the required Docker machine drivers and Kubernetes engines, such as RKE and GKE

By default, to enable Rancher to communicate with a downstream cluster, the cluster controller connects to the cluster agent. If the cluster agent is not available, the cluster controller can connect to a node agent instead.

The cluster agent, also called cattle-cluster-agent, is a component that runs in a downstream user cluster. It performs the following tasks:

Connects to the Kubernetes API of Rancher-launched Kubernetes clusters
Manages workloads, pod creation and deployment within each cluster
Applies the roles and bindings defined in each cluster’s global policies
Communicates between the cluster and Rancher server (through a tunnel to the cluster controller) about events, stats, node info, and health

3. Node Agents

If the cluster agent (also called cattle-cluster-agent) is not available, one of the node agents creates a tunnel to the cluster controller to communicate with Rancher.

The cattle-node-agent is deployed using a DaemonSet resource to make sure it runs on every node in a Rancher-launched Kubernetes cluster. It is used to interact with the nodes when performing cluster operations. Examples of cluster operations include upgrading the Kubernetes version and creating or restoring etcd snapshots.

4. Authorized Cluster Endpoint

An authorized cluster endpoint (ACE) allows users to connect to the Kubernetes API server of a downstream cluster without having to route their requests through the Rancher authentication proxy.

ACE is available on RKE, RKE2, and K3s clusters that are provisioned or registered with Rancher. It’s not available on clusters in a hosted Kubernetes provider, such as Amazon’s EKS.

There are two main reasons why a user might need the authorized cluster endpoint:

To access a downstream user cluster while Rancher is down
To reduce latency in situations where the Rancher server and downstream cluster are separated by a long distance

The kube-api-auth microservice is deployed to provide the user authentication functionality for the authorized cluster endpoint. When you access the user cluster using kubectl, the cluster’s Kubernetes API server authenticates you by using the kube-api-auth service as a webhook.

Like the authorized cluster endpoint, the kube-api-auth authentication service is also only available for Rancher-launched Kubernetes clusters.

Example scenario: Let’s say that the Rancher server is located in the United States, and User Cluster 1 is located in Australia. A user, Alice, also lives in Australia. Alice can manipulate resources in User Cluster 1 by using the Rancher UI, but her requests will have to be sent from Australia to the Rancher server in the United States, then be proxied back to Australia, where the downstream user cluster is. The geographical distance may cause significant latency, which Alice can reduce by using the authorized cluster endpoint.

With this endpoint enabled for the downstream cluster, Rancher generates an extra Kubernetes context in the kubeconfig file in order to connect directly to the cluster. This file has the credentials for kubectl and helm.

note

To use the ACE context in your kubeconfig, run kubectl use-context <ace context name> after enabling it.

For more information, refer to the section on accessing your cluster with kubectl and the kubeconfig file.

We recommend exporting the kubeconfig file so that if Rancher goes down, you can still use the credentials in the file to access your cluster.

Impersonation

Known Issue

Service account impersonation (--as) used by lower privileged user accounts to remove privileges is not implemented and is a feature being tracked.

Users technically exist only on the upstream cluster. Rancher creates RoleBindings and ClusterRoleBindings that refer to Rancher users, even though there is no actual User resource on the downstream cluster.

When users interact with a downstream cluster through the authentication proxy, there needs to be some entity downstream to serve as the actor for those requests. Rancher creates service accounts to be that entity. Each service account is only granted one permission, which is to impersonate the user they belong to. If there was only one service account that could impersonate any user, then it would be possible for a malicious user to corrupt that account and escalate their privileges by impersonating another user. This issue was the basis for a CVE.

Impersonation Troubleshooting

On the downstream cluster, five resources handle impersonation:

namespace: cattle-impersonation-system
service account: cattle-impersonation-system/cattle-impersonation-<user ID>
account token secret: cattle-impersonation-system/cattle-impersonation-<user ID>-token-<hash>
cluster role: cattle-impersonation-<user ID>
cluster role binding: cattle-impersonation-<user ID>

In this example of a typical impersonation cluster role, the system is configured to use github as the auth provider:

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
 creationTimestamp: "2021-10-06T18:20:13Z"
 labels:
   authz.cluster.cattle.io/impersonator: "true"
   cattle.io/creator: norman
 name: cattle-impersonation-user-abcde
 resourceVersion: "3528"
 uid: a7478731-72a0-4343-b09f-c3bf12552d77
rules:
# allowed to impersonate user user-abcde
- apiGroups:
 - ""
 resourceNames:
 - user-abcde
 resources:
 - users
 verbs:
 - impersonate
# allowed to impersonate listed groups
- apiGroups:
 - ""
 resourceNames:
 - github_team://123 # group from GitHub auth provider
 - system:authenticated # automatic group from Kubernetes
 - system:cattle:authenticated # automatic group from Rancher
 resources:
 - groups
 verbs:
 - impersonate
# allowed to impersonate principal ID github_user://098
- apiGroups:
 - authentication.k8s.io
 resourceNames:
 - github_user://098 # principal ID from GitHub auth provider
 resources:
 - userextras/principalid
 verbs:
 - impersonate
# allowed to impersonate username example
- apiGroups:
 - authentication.k8s.io
 resourceNames:
 - example # username from GitHub auth provider
 resources:
 - userextras/username
 verbs:
 - impersonate

When you troubleshoot impersonation issues, check whether these resources exist for the user, and whether the rules in the cluster role look similar to the above. For example:

kubectl --namespace cattle-impersonation-system get serviceaccount cattle-impersonation-<user ID>
kubectl --namespace cattle-impersonation-system get secret cattle-impersonation-<user ID>-token-<hash>
kubectl get clusterrole cattle-impersonation-<user ID> --output yaml
kubectl get clusterrolebinding cattle-impersonation-<user ID>

If you see an error related to “impersonation” in the UI, pay close attention to the end of the error message, which should indicate the real reason that the request failed.

Important Files

The files mentioned below are needed to maintain, troubleshoot and upgrade your cluster:

rancher-cluster.yml: The RKE cluster configuration file.
kube_config_rancher-cluster.yml: The Kubeconfig file for the cluster, this file contains credentials for full access to the cluster. You can use this file to authenticate with a Rancher-launched Kubernetes cluster if Rancher goes down.
rancher-cluster.rkestate: The Kubernetes cluster state file. This file contains credentials for full access to the cluster. Note: This state file is only created when using RKE v0.2.0 or higher.

Note: The “rancher-cluster” parts of the two latter file names are dependent on how you name the RKE cluster configuration file.

For more information on connecting to a cluster without the Rancher authentication proxy and other configuration options, refer to the kubeconfig file documentation.

Tools for Provisioning Kubernetes Clusters

The tools that Rancher uses to provision downstream user clusters depends on the type of cluster that is being provisioned.

Rancher Launched Kubernetes for Nodes Hosted in an Infrastructure Provider

Rancher can dynamically provision nodes in a provider such as Amazon EC2, DigitalOcean, Azure, or vSphere, then install Kubernetes on them.

Rancher provisions this type of cluster using RKE and docker-machine.

Rancher Launched Kubernetes for Custom Nodes

When setting up this type of cluster, Rancher installs Kubernetes on existing nodes, which creates a custom cluster.

Rancher provisions this type of cluster using RKE.

Hosted Kubernetes Providers

When setting up this type of cluster, Kubernetes is installed by providers such as Google Kubernetes Engine, Amazon Elastic Container Service for Kubernetes, or Azure Kubernetes Service.

Rancher provisions this type of cluster using kontainer-engine.

Imported Kubernetes Clusters

In this type of cluster, Rancher connects to a Kubernetes cluster that has already been set up. Therefore, Rancher does not provision Kubernetes, but only sets up the Rancher agents to communicate with the cluster.

Rancher Server Components and Source Code

This diagram shows each component that the Rancher server is composed of:

The GitHub repositories for Rancher can be found at the following links:

This is a partial list of the most important Rancher repositories. For more details about Rancher source code, refer to the section on contributing to Rancher. To see all libraries and projects used in Rancher, see the go.mod file in the rancher/rancher repository.