Use Kong as a delegated Gateway

Use Kong as a delegated Gateway

To get traffic from outside your mesh inside it (North/South) with Kuma you can use a delegated gateway.

In the quickstart, traffic was only able to get in the mesh by port-forwarding to an instance of an app inside the mesh. In production, you typically set up a gateway to receive traffic external to the mesh. In this guide you will add Kong as a delegated gateway in front of the demo-app service and expose it publicly.


---
title: service graph of the demo app with a Kong gateway on front
---
flowchart LR
  subgraph Kong Gateway 
    gw0(/ :80)
  end
  demo-app(demo-app :5000)
  redis(redis :6379)
  gw0 --> demo-app 
  demo-app --> redis

Prerequisites

Completed quickstart to set up a zone control plane with demo application

Install Kong ingress controller

Follow the steps on the Kong docs website to install the ingress controller.

The Kubernetes cluster needs to support LoadBalancer for this to work. This may not be the case if the Kubernetes cluster is running locally with kind or k3d.

Enable sidecar injection on the `kong` namespace

The Kong Ingress controller was installed outside the mesh. For it to work as a delegated gateway restart it with sidecar injection enabled:

Add the label:

kubectl label namespace kong kuma.io/sidecar-injection=enabled

Restart both the controller and the gateway to leverage sidecar injection:

kubectl rollout restart -n kong deployment kong-gateway kong-controller

Wait until pods are fully rolled out and look at them:

kubectl get pods -n kong

It is now visible that both pods have 2 containers, one for the application and one for the sidecar.

NAME                              READY   STATUS    RESTARTS      AGE
kong-controller-675d48d48-vqllj   2/2     Running   2 (69s ago)   72s
kong-gateway-674c44c5c4-cvsr8     2/2     Running   0             72s

Retrieve the public URL for the gateway with:

export PROXY_IP=$(kubectl get svc --namespace kong kong-gateway-proxy -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
echo $PROXY_IP

Verify the gateway still works:

curl -i $PROXY_IP

which outputs that there are no routes defined:

HTTP/1.1 404 Not Found
Date: Fri, 09 Feb 2024 15:25:45 GMT
Content-Type: application/json; charset=utf-8
Connection: keep-alive
Content-Length: 103
X-Kong-Response-Latency: 0
Server: kong/3.5.0
X-Kong-Request-Id: e7dfe659c9e46639a382f82c16d9582f
{
  "message":"no Route matched with those values",
  "request_id":"e7dfe659c9e46639a382f82c16d9582f"
}%

Add a route to our `demo-app`

Patch our gateway to allow routes in any namespace:

kubectl patch --type=json gateways.gateway.networking.k8s.io kong -p='[{"op":"replace","path": "/spec/listeners/0/allowedRoutes/namespaces/from","value":"All"}]'

This is required because in the Kong ingress controller tutorial the gateway is created in the default namespace. To do this the Gateway API spec requires to explicitly allow routes from different namespaces.

Now add the gateway route in our kuma-demo namespace which binds to the gateway kong defined in the default namespace:

echo "
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: demo-app
  namespace: kuma-demo
spec:
  parentRefs:
  - name: kong
    namespace: default
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - name: demo-app
      kind: Service
      port: 5000 
" | kubectl apply -f -

This route is managed by the Kong ingress controller and not by Kuma.

Now call the gateway:

curl -i $PROXY_IP/

Which outputs:

HTTP/1.1 403 Forbidden
Content-Type: text/plain; charset=UTF-8
Content-Length: 19
Connection: keep-alive
date: Fri, 09 Feb 2024 15:51:10 GMT
server: envoy
x-envoy-upstream-service-time: 0
X-Kong-Upstream-Latency: 2
X-Kong-Proxy-Latency: 0
Via: kong/3.5.0
X-Kong-Request-Id: 3b9d7d0db8c4cf25759d95682d6e3573
RBAC: access denied%

Notice the forbidden error. This is because the quickstart has very restrictive permissions as defaults. Therefore, the gateway doesn’t have permissions to talk to the demo-app service.

To fix this, add a MeshTrafficPermission:

echo "
apiVersion: kuma.io/v1alpha1
kind: MeshTrafficPermission
metadata:
  namespace: kuma-system 
  name: demo-app
spec:
  targetRef:
    kind: MeshService
    name: demo-app_kuma-demo_svc_5000
  from:
    - targetRef:
        kind: MeshSubset
        tags:
          app.kubernetes.io/name: gateway
          k8s.kuma.io/namespace: kong
      default:
        action: Allow
" | kubectl apply -f -

Call the gateway again:

curl -i $PROXY_IP/increment -XPOST

Notice that the call succeeds:


HTTP/1.1 200 OK
Content-Type: application/json; charset=utf-8
Content-Length: 41
Connection: keep-alive
x-powered-by: Express
etag: W/"29-iu9zuSv48n703xjnEeBnBQzQFgA"
date: Fri, 09 Feb 2024 15:57:27 GMT
x-envoy-upstream-service-time: 7
server: envoy
X-Kong-Upstream-Latency: 11
X-Kong-Proxy-Latency: 0
Via: kong/3.5.0
X-Kong-Request-Id: 886cc96df034ea37cfbbb0450a987049
{"counter":149,"zone":"local","err":null}%

Next steps

Read more about the different types of gateways in the managing ingress traffic docs.
Learn about setting up observability to get full end to end visibility of your mesh.

Add Kong as a delegated Gateway