CPUParticles3D

Inherits: GeometryInstance3D < VisualInstance3D < Node3D < Node < Object

A CPU-based 3D particle emitter.

Description

CPU-based 3D particle node used to create a variety of particle systems and effects.

See also GPUParticles3D, which provides the same functionality with hardware acceleration, but may not run on older devices.

Tutorials

• Particle systems (3D)

Properties

Methods

Signals

finished ( )

Emitted when all active particles have finished processing. When one_shot is disabled, particles will process continuously, so this is never emitted.

Enumerations

enum DrawOrder:

DrawOrder DRAW_ORDER_INDEX = 0

Particles are drawn in the order emitted.

DrawOrder DRAW_ORDER_LIFETIME = 1

Particles are drawn in order of remaining lifetime. In other words, the particle with the highest lifetime is drawn at the front.

DrawOrder DRAW_ORDER_VIEW_DEPTH = 2

Particles are drawn in order of depth.

enum Parameter:

Parameter PARAM_INITIAL_LINEAR_VELOCITY = 0

Use with set_param_min, set_param_max, and set_param_curve to set initial velocity properties.

Parameter PARAM_ANGULAR_VELOCITY = 1

Use with set_param_min, set_param_max, and set_param_curve to set angular velocity properties.

Parameter PARAM_ORBIT_VELOCITY = 2

Use with set_param_min, set_param_max, and set_param_curve to set orbital velocity properties.

Parameter PARAM_LINEAR_ACCEL = 3

Use with set_param_min, set_param_max, and set_param_curve to set linear acceleration properties.

Parameter PARAM_RADIAL_ACCEL = 4

Use with set_param_min, set_param_max, and set_param_curve to set radial acceleration properties.

Parameter PARAM_TANGENTIAL_ACCEL = 5

Use with set_param_min, set_param_max, and set_param_curve to set tangential acceleration properties.

Parameter PARAM_DAMPING = 6

Use with set_param_min, set_param_max, and set_param_curve to set damping properties.

Parameter PARAM_ANGLE = 7

Use with set_param_min, set_param_max, and set_param_curve to set angle properties.

Parameter PARAM_SCALE = 8

Use with set_param_min, set_param_max, and set_param_curve to set scale properties.

Parameter PARAM_HUE_VARIATION = 9

Use with set_param_min, set_param_max, and set_param_curve to set hue variation properties.

Parameter PARAM_ANIM_SPEED = 10

Use with set_param_min, set_param_max, and set_param_curve to set animation speed properties.

Parameter PARAM_ANIM_OFFSET = 11

Use with set_param_min, set_param_max, and set_param_curve to set animation offset properties.

Parameter PARAM_MAX = 12

Represents the size of the Parameter enum.

enum ParticleFlags:

ParticleFlags PARTICLE_FLAG_ALIGN_Y_TO_VELOCITY = 0

Use with set_particle_flag to set particle_flag_align_y.

ParticleFlags PARTICLE_FLAG_ROTATE_Y = 1

Use with set_particle_flag to set particle_flag_rotate_y.

ParticleFlags PARTICLE_FLAG_DISABLE_Z = 2

Use with set_particle_flag to set particle_flag_disable_z.

ParticleFlags PARTICLE_FLAG_MAX = 3

Represents the size of the ParticleFlags enum.

enum EmissionShape:

EmissionShape EMISSION_SHAPE_POINT = 0

All particles will be emitted from a single point.

EmissionShape EMISSION_SHAPE_SPHERE = 1

Particles will be emitted in the volume of a sphere.

EmissionShape EMISSION_SHAPE_SPHERE_SURFACE = 2

Particles will be emitted on the surface of a sphere.

EmissionShape EMISSION_SHAPE_BOX = 3

Particles will be emitted in the volume of a box.

EmissionShape EMISSION_SHAPE_POINTS = 4

Particles will be emitted at a position chosen randomly among emission_points. Particle color will be modulated by emission_colors.

EmissionShape EMISSION_SHAPE_DIRECTED_POINTS = 5

Particles will be emitted at a position chosen randomly among emission_points. Particle velocity and rotation will be set based on emission_normals. Particle color will be modulated by emission_colors.

EmissionShape EMISSION_SHAPE_RING = 6

Particles will be emitted in a ring or cylinder.

EmissionShape EMISSION_SHAPE_MAX = 7

Represents the size of the EmissionShape enum.

Property Descriptions

int amount = 8

• void set_amount ( int value )

• int get_amount ( )

Number of particles emitted in one emission cycle.

Curve angle_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s rotation will be animated along this Curve.

float angle_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum angle.

float angle_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum angle.

Curve angular_velocity_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s angular velocity (rotation speed) will vary along this Curve over its lifetime.

float angular_velocity_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum initial angular velocity (rotation speed) applied to each particle in degrees per second.

float angular_velocity_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum initial angular velocity (rotation speed) applied to each particle in degrees per second.

Curve anim_offset_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s animation offset will vary along this Curve.

float anim_offset_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum animation offset.

float anim_offset_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum animation offset.

Curve anim_speed_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s animation speed will vary along this Curve.

float anim_speed_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum particle animation speed.

float anim_speed_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum particle animation speed.

Color color = Color(1, 1, 1, 1)

• void set_color ( Color value )

• Color get_color ( )

Each particle’s initial color.

Note: color multiplies the particle mesh’s vertex colors. To have a visible effect on a BaseMaterial3D, BaseMaterial3D.vertex_color_use_as_albedo must be true. For a ShaderMaterial, ALBEDO *= COLOR.rgb; must be inserted in the shader’s fragment() function. Otherwise, color will have no visible effect.

Gradient color_initial_ramp

• void set_color_initial_ramp ( Gradient value )

• Gradient get_color_initial_ramp ( )

Each particle’s initial color will vary along this GradientTexture1D (multiplied with color).

Note: color_initial_ramp multiplies the particle mesh’s vertex colors. To have a visible effect on a BaseMaterial3D, BaseMaterial3D.vertex_color_use_as_albedo must be true. For a ShaderMaterial, ALBEDO *= COLOR.rgb; must be inserted in the shader’s fragment() function. Otherwise, color_initial_ramp will have no visible effect.

Gradient color_ramp

• void set_color_ramp ( Gradient value )

• Gradient get_color_ramp ( )

Each particle’s color will vary along this GradientTexture1D over its lifetime (multiplied with color).

Note: color_ramp multiplies the particle mesh’s vertex colors. To have a visible effect on a BaseMaterial3D, BaseMaterial3D.vertex_color_use_as_albedo must be true. For a ShaderMaterial, ALBEDO *= COLOR.rgb; must be inserted in the shader’s fragment() function. Otherwise, color_ramp will have no visible effect.

Curve damping_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Damping will vary along this Curve.

float damping_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum damping.

float damping_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum damping.

Vector3 direction = Vector3(1, 0, 0)

• void set_direction ( Vector3 value )

• Vector3 get_direction ( )

Unit vector specifying the particles’ emission direction.

DrawOrder draw_order = 0

• void set_draw_order ( DrawOrder value )

• DrawOrder get_draw_order ( )

Particle draw order. Uses DrawOrder values.

Vector3 emission_box_extents

• void set_emission_box_extents ( Vector3 value )

• Vector3 get_emission_box_extents ( )

The rectangle’s extents if emission_shape is set to EMISSION_SHAPE_BOX.

PackedColorArray emission_colors = PackedColorArray()

• void set_emission_colors ( PackedColorArray value )

• PackedColorArray get_emission_colors ( )

Sets the Colors to modulate particles by when using EMISSION_SHAPE_POINTS or EMISSION_SHAPE_DIRECTED_POINTS.

Note: emission_colors multiplies the particle mesh’s vertex colors. To have a visible effect on a BaseMaterial3D, BaseMaterial3D.vertex_color_use_as_albedo must be true. For a ShaderMaterial, ALBEDO *= COLOR.rgb; must be inserted in the shader’s fragment() function. Otherwise, emission_colors will have no visible effect.

PackedVector3Array emission_normals

• void set_emission_normals ( PackedVector3Array value )

• PackedVector3Array get_emission_normals ( )

Sets the direction the particles will be emitted in when using EMISSION_SHAPE_DIRECTED_POINTS.

PackedVector3Array emission_points

• void set_emission_points ( PackedVector3Array value )

• PackedVector3Array get_emission_points ( )

Sets the initial positions to spawn particles when using EMISSION_SHAPE_POINTS or EMISSION_SHAPE_DIRECTED_POINTS.

Vector3 emission_ring_axis

• void set_emission_ring_axis ( Vector3 value )

• Vector3 get_emission_ring_axis ( )

The axis of the ring when using the emitter EMISSION_SHAPE_RING.

float emission_ring_height

• void set_emission_ring_height ( float value )

• float get_emission_ring_height ( )

The height of the ring when using the emitter EMISSION_SHAPE_RING.

float emission_ring_inner_radius

• void set_emission_ring_inner_radius ( float value )

• float get_emission_ring_inner_radius ( )

The inner radius of the ring when using the emitter EMISSION_SHAPE_RING.

float emission_ring_radius

• void set_emission_ring_radius ( float value )

• float get_emission_ring_radius ( )

The radius of the ring when using the emitter EMISSION_SHAPE_RING.

EmissionShape emission_shape = 0

• void set_emission_shape ( EmissionShape value )

• EmissionShape get_emission_shape ( )

Particles will be emitted inside this region. See EmissionShape for possible values.

float emission_sphere_radius

• void set_emission_sphere_radius ( float value )

• float get_emission_sphere_radius ( )

The sphere’s radius if EmissionShape is set to EMISSION_SHAPE_SPHERE.

bool emitting = true

• void set_emitting ( bool value )

• bool is_emitting ( )

If true, particles are being emitted. emitting can be used to start and stop particles from emitting. However, if one_shot is true setting emitting to true will not restart the emission cycle until after all active particles finish processing. You can use the finished signal to be notified once all active particles finish processing.

float explosiveness = 0.0

• void set_explosiveness_ratio ( float value )

• float get_explosiveness_ratio ( )

How rapidly particles in an emission cycle are emitted. If greater than 0, there will be a gap in emissions before the next cycle begins.

int fixed_fps = 0

• void set_fixed_fps ( int value )

• int get_fixed_fps ( )

The particle system’s frame rate is fixed to a value. For example, changing the value to 2 will make the particles render at 2 frames per second. Note this does not slow down the particle system itself.

float flatness = 0.0

• void set_flatness ( float value )

• float get_flatness ( )

Amount of spread in Y/Z plane. A value of 1 restricts particles to X/Z plane.

bool fract_delta = true

• void set_fractional_delta ( bool value )

• bool get_fractional_delta ( )

If true, results in fractional delta calculation which has a smoother particles display effect.

Vector3 gravity = Vector3(0, -9.8, 0)

• void set_gravity ( Vector3 value )

• Vector3 get_gravity ( )

Gravity applied to every particle.

Curve hue_variation_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s hue will vary along this Curve.

float hue_variation_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum hue variation.

float hue_variation_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum hue variation.

float initial_velocity_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum value of the initial velocity.

float initial_velocity_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum value of the initial velocity.

float lifetime = 1.0

• void set_lifetime ( float value )

• float get_lifetime ( )

Amount of time each particle will exist.

float lifetime_randomness = 0.0

• void set_lifetime_randomness ( float value )

• float get_lifetime_randomness ( )

Particle lifetime randomness ratio.

Curve linear_accel_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s linear acceleration will vary along this Curve.

float linear_accel_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum linear acceleration.

float linear_accel_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum linear acceleration.

bool local_coords = false

• void set_use_local_coordinates ( bool value )

• bool get_use_local_coordinates ( )

If true, particles use the parent node’s coordinate space (known as local coordinates). This will cause particles to move and rotate along the CPUParticles3D node (and its parents) when it is moved or rotated. If false, particles use global coordinates; they will not move or rotate along the CPUParticles3D node (and its parents) when it is moved or rotated.

Mesh mesh

• void set_mesh ( Mesh value )

• Mesh get_mesh ( )

The Mesh used for each particle. If null, particles will be spheres.

bool one_shot = false

• void set_one_shot ( bool value )

• bool get_one_shot ( )

If true, only one emission cycle occurs. If set true during a cycle, emission will stop at the cycle’s end.

Curve orbit_velocity_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s orbital velocity will vary along this Curve.

float orbit_velocity_max

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum orbit velocity.

float orbit_velocity_min

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum orbit velocity.

bool particle_flag_align_y = false

• void set_particle_flag ( ParticleFlags particle_flag, bool enable )

• bool get_particle_flag ( ParticleFlags particle_flag ) const

Align Y axis of particle with the direction of its velocity.

bool particle_flag_disable_z = false

• void set_particle_flag ( ParticleFlags particle_flag, bool enable )

• bool get_particle_flag ( ParticleFlags particle_flag ) const

If true, particles will not move on the Z axis.

bool particle_flag_rotate_y = false

• void set_particle_flag ( ParticleFlags particle_flag, bool enable )

• bool get_particle_flag ( ParticleFlags particle_flag ) const

If true, particles rotate around Y axis by angle_min.

float preprocess = 0.0

• void set_pre_process_time ( float value )

• float get_pre_process_time ( )

Particle system starts as if it had already run for this many seconds.

Curve radial_accel_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s radial acceleration will vary along this Curve.

float radial_accel_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum radial acceleration.

float radial_accel_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum radial acceleration.

float randomness = 0.0

• void set_randomness_ratio ( float value )

• float get_randomness_ratio ( )

Emission lifetime randomness ratio.

Curve scale_amount_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s scale will vary along this Curve.

float scale_amount_max = 1.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum scale.

float scale_amount_min = 1.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum scale.

Curve scale_curve_x

• void set_scale_curve_x ( Curve value )

• Curve get_scale_curve_x ( )

Curve for the scale over life, along the x axis.

Curve scale_curve_y

• void set_scale_curve_y ( Curve value )

• Curve get_scale_curve_y ( )

Curve for the scale over life, along the y axis.

Curve scale_curve_z

• void set_scale_curve_z ( Curve value )

• Curve get_scale_curve_z ( )

Curve for the scale over life, along the z axis.

float speed_scale = 1.0

• void set_speed_scale ( float value )

• float get_speed_scale ( )

Particle system’s running speed scaling ratio. A value of 0 can be used to pause the particles.

bool split_scale = false

• void set_split_scale ( bool value )

• bool get_split_scale ( )

If set to true, three different scale curves can be specified, one per scale axis.

float spread = 45.0

• void set_spread ( float value )

• float get_spread ( )

Each particle’s initial direction range from +spread to -spread degrees. Applied to X/Z plane and Y/Z planes.

Curve tangential_accel_curve

• void set_param_curve ( Parameter param, Curve curve )

• Curve get_param_curve ( Parameter param ) const

Each particle’s tangential acceleration will vary along this Curve.

float tangential_accel_max = 0.0

• void set_param_max ( Parameter param, float value )

• float get_param_max ( Parameter param ) const

Maximum tangent acceleration.

float tangential_accel_min = 0.0

• void set_param_min ( Parameter param, float value )

• float get_param_min ( Parameter param ) const

Minimum tangent acceleration.

Method Descriptions

void convert_from_particles ( Node particles )

Sets this node’s properties to match a given GPUParticles3D node with an assigned ParticleProcessMaterial.

Curve get_param_curve ( Parameter param ) const

Returns the Curve of the parameter specified by Parameter.

float get_param_max ( Parameter param ) const

Returns the maximum value range for the given parameter.

float get_param_min ( Parameter param ) const

Returns the minimum value range for the given parameter.

bool get_particle_flag ( ParticleFlags particle_flag ) const

Returns the enabled state of the given particle flag (see ParticleFlags for options).

void restart ( )

Restarts the particle emitter.

void set_param_curve ( Parameter param, Curve curve )

Sets the Curve of the parameter specified by Parameter.

void set_param_max ( Parameter param, float value )

Sets the maximum value for the given parameter.

void set_param_min ( Parameter param, float value )

Sets the minimum value for the given parameter.

void set_particle_flag ( ParticleFlags particle_flag, bool enable )

Enables or disables the given particle flag (see ParticleFlags for options).

Previous Next

© Copyright 2014-present Juan Linietsky, Ariel Manzur and the Godot community (CC BY 3.0). Revision 53e837c6.

Built with Sphinx using a theme provided by Read the Docs.