NavigationAgent2D

Inherits: Node < Object

A 2D agent used to pathfind to a position while avoiding obstacles.

Description

A 2D agent used to pathfind to a position while avoiding static and dynamic obstacles. The calculation can be used by the parent node to dynamically move it along the path. Requires navigation data to work correctly.

Dynamic obstacles are avoided using RVO collision avoidance. Avoidance is computed before physics, so the pathfinding information can be used safely in the physics step.

Note: After setting the target_position property, the get_next_path_position method must be used once every physics frame to update the internal path logic of the navigation agent. The vector position it returns should be used as the next movement position for the agent’s parent node.

Tutorials

• Using NavigationAgents

Properties

Methods

Signals

link_reached ( Dictionary details )

Notifies when a navigation link has been reached.

The details dictionary may contain the following keys depending on the value of path_metadata_flags:

• position: The start position of the link that was reached.

• type: Always NavigationPathQueryResult2D.PATH_SEGMENT_TYPE_LINK.

• rid: The RID of the link.

• owner: The object which manages the link (usually NavigationLink2D).

• link_entry_position: If owner is available and the owner is a NavigationLink2D, it will contain the global position of the link’s point the agent is entering.

• link_exit_position: If owner is available and the owner is a NavigationLink2D, it will contain the global position of the link’s point which the agent is exiting.

navigation_finished ( )

Emitted once per loaded path when the agent internal navigation path index reaches the last index of the loaded path array. The agent internal navigation path index can be received with get_current_navigation_path_index.

path_changed ( )

Emitted when the agent had to update the loaded path:

• because path was previously empty.

• because navigation map has changed.

• because agent pushed further away from the current path segment than the path_max_distance.

target_reached ( )

Emitted once per loaded path when the agent’s global position is the first time within target_desired_distance to the target_position.

velocity_computed ( Vector2 safe_velocity )

Notifies when the collision avoidance velocity is calculated. Emitted when velocity is set. Only emitted when avoidance_enabled is true.

waypoint_reached ( Dictionary details )

Notifies when a waypoint along the path has been reached.

The details dictionary may contain the following keys depending on the value of path_metadata_flags:

• position: The position of the waypoint that was reached.

• type: The type of navigation primitive (region or link) that contains this waypoint.

• rid: The RID of the containing navigation primitive (region or link).

• owner: The object which manages the containing navigation primitive (region or link).

Property Descriptions

bool avoidance_enabled = false

• void set_avoidance_enabled ( bool value )

• bool get_avoidance_enabled ( )

If true the agent is registered for an RVO avoidance callback on the NavigationServer2D. When velocity is used and the processing is completed a safe_velocity Vector2 is received with a signal connection to velocity_computed. Avoidance processing with many registered agents has a significant performance cost and should only be enabled on agents that currently require it.

int avoidance_layers = 1

• void set_avoidance_layers ( int value )

• int get_avoidance_layers ( )

A bitfield determining the avoidance layers for this NavigationAgent. Other agents with a matching bit on the avoidance_mask will avoid this agent.

int avoidance_mask = 1

• void set_avoidance_mask ( int value )

• int get_avoidance_mask ( )

A bitfield determining what other avoidance agents and obstacles this NavigationAgent will avoid when a bit matches at least one of their avoidance_layers.

float avoidance_priority = 1.0

• void set_avoidance_priority ( float value )

• float get_avoidance_priority ( )

The agent does not adjust the velocity for other agents that would match the avoidance_mask but have a lower avoidance_priority. This in turn makes the other agents with lower priority adjust their velocities even more to avoid collision with this agent.

bool debug_enabled = false

• void set_debug_enabled ( bool value )

• bool get_debug_enabled ( )

If true shows debug visuals for this agent.

Color debug_path_custom_color = Color(1, 1, 1, 1)

• void set_debug_path_custom_color ( Color value )

• Color get_debug_path_custom_color ( )

If debug_use_custom is true uses this color for this agent instead of global color.

float debug_path_custom_line_width = -1.0

• void set_debug_path_custom_line_width ( float value )

• float get_debug_path_custom_line_width ( )

If debug_use_custom is true uses this line width for rendering paths for this agent instead of global line width.

float debug_path_custom_point_size = 4.0

• void set_debug_path_custom_point_size ( float value )

• float get_debug_path_custom_point_size ( )

If debug_use_custom is true uses this rasterized point size for rendering path points for this agent instead of global point size.

bool debug_use_custom = false

• void set_debug_use_custom ( bool value )

• bool get_debug_use_custom ( )

If true uses the defined debug_path_custom_color for this agent instead of global color.

int max_neighbors = 10

• void set_max_neighbors ( int value )

• int get_max_neighbors ( )

The maximum number of neighbors for the agent to consider.

float max_speed = 100.0

• void set_max_speed ( float value )

• float get_max_speed ( )

The maximum speed that an agent can move.

int navigation_layers = 1

• void set_navigation_layers ( int value )

• int get_navigation_layers ( )

A bitfield determining which navigation layers of navigation regions this agent will use to calculate a path. Changing it during runtime will clear the current navigation path and generate a new one, according to the new navigation layers.

float neighbor_distance = 500.0

• void set_neighbor_distance ( float value )

• float get_neighbor_distance ( )

The distance to search for other agents.

float path_desired_distance = 20.0

• void set_path_desired_distance ( float value )

• float get_path_desired_distance ( )

The distance threshold before a path point is considered to be reached. This allows agents to not have to hit a path point on the path exactly, but only to reach its general area. If this value is set too high, the NavigationAgent will skip points on the path, which can lead to leaving the navigation mesh. If this value is set too low, the NavigationAgent will be stuck in a repath loop because it will constantly overshoot or undershoot the distance to the next point on each physics frame update.

float path_max_distance = 100.0

• void set_path_max_distance ( float value )

• float get_path_max_distance ( )

The maximum distance the agent is allowed away from the ideal path to the final position. This can happen due to trying to avoid collisions. When the maximum distance is exceeded, it recalculates the ideal path.

BitField<PathMetadataFlags> path_metadata_flags = 7

• void set_path_metadata_flags ( BitField<PathMetadataFlags> value )

• BitField<PathMetadataFlags> get_path_metadata_flags ( )

Additional information to return with the navigation path.

PathPostProcessing path_postprocessing = 0

• void set_path_postprocessing ( PathPostProcessing value )

• PathPostProcessing get_path_postprocessing ( )

The path postprocessing applied to the raw path corridor found by the pathfinding_algorithm.

PathfindingAlgorithm pathfinding_algorithm = 0

• void set_pathfinding_algorithm ( PathfindingAlgorithm value )

• PathfindingAlgorithm get_pathfinding_algorithm ( )

The pathfinding algorithm used in the path query.

float radius = 10.0

• void set_radius ( float value )

• float get_radius ( )

The radius of the avoidance agent. This is the “body” of the avoidance agent and not the avoidance maneuver starting radius (which is controlled by neighbor_distance).

Does not affect normal pathfinding. To change an actor’s pathfinding radius bake NavigationMesh resources with a different NavigationMesh.agent_radius property and use different navigation maps for each actor size.

float target_desired_distance = 10.0

• void set_target_desired_distance ( float value )

• float get_target_desired_distance ( )

The distance threshold before the final target point is considered to be reached. This allows agents to not have to hit the point of the final target exactly, but only to reach its general area. If this value is set too low, the NavigationAgent will be stuck in a repath loop because it will constantly overshoot or undershoot the distance to the final target point on each physics frame update.

Vector2 target_position = Vector2(0, 0)

• void set_target_position ( Vector2 value )

• Vector2 get_target_position ( )

If set, a new navigation path from the current agent position to the target_position is requested from the NavigationServer.

float time_horizon_agents = 1.0

• void set_time_horizon_agents ( float value )

• float get_time_horizon_agents ( )

The minimal amount of time for which this agent’s velocities, that are computed with the collision avoidance algorithm, are safe with respect to other agents. The larger the number, the sooner the agent will respond to other agents, but less freedom in choosing its velocities. A too high value will slow down agents movement considerably. Must be positive.

float time_horizon_obstacles = 0.0

• void set_time_horizon_obstacles ( float value )

• float get_time_horizon_obstacles ( )

The minimal amount of time for which this agent’s velocities, that are computed with the collision avoidance algorithm, are safe with respect to static avoidance obstacles. The larger the number, the sooner the agent will respond to static avoidance obstacles, but less freedom in choosing its velocities. A too high value will slow down agents movement considerably. Must be positive.

Vector2 velocity = Vector2(0, 0)

• void set_velocity ( Vector2 value )

• Vector2 get_velocity ( )

Sets the new wanted velocity for the agent. The avoidance simulation will try to fulfill this velocity if possible but will modify it to avoid collision with other agents and obstacles. When an agent is teleported to a new position, use set_velocity_forced as well to reset the internal simulation velocity.

Method Descriptions

float distance_to_target ( ) const

Returns the distance to the target position, using the agent’s global position. The user must set target_position in order for this to be accurate.

bool get_avoidance_layer_value ( int layer_number ) const

Returns whether or not the specified layer of the avoidance_layers bitmask is enabled, given a layer_number between 1 and 32.

bool get_avoidance_mask_value ( int mask_number ) const

Returns whether or not the specified mask of the avoidance_mask bitmask is enabled, given a mask_number between 1 and 32.

PackedVector2Array get_current_navigation_path ( ) const

Returns this agent’s current path from start to finish in global coordinates. The path only updates when the target position is changed or the agent requires a repath. The path array is not intended to be used in direct path movement as the agent has its own internal path logic that would get corrupted by changing the path array manually. Use the intended get_next_path_position once every physics frame to receive the next path point for the agents movement as this function also updates the internal path logic.

int get_current_navigation_path_index ( ) const

Returns which index the agent is currently on in the navigation path’s PackedVector2Array.

NavigationPathQueryResult2D get_current_navigation_result ( ) const

Returns the path query result for the path the agent is currently following.

Vector2 get_final_position ( )

Returns the reachable final position of the current navigation path in global coordinates. This position can change if the agent needs to update the navigation path which makes the agent emit the path_changed signal.

bool get_navigation_layer_value ( int layer_number ) const

Returns whether or not the specified layer of the navigation_layers bitmask is enabled, given a layer_number between 1 and 32.

RID get_navigation_map ( ) const

Returns the RID of the navigation map for this NavigationAgent node. This function returns always the map set on the NavigationAgent node and not the map of the abstract agent on the NavigationServer. If the agent map is changed directly with the NavigationServer API the NavigationAgent node will not be aware of the map change. Use set_navigation_map to change the navigation map for the NavigationAgent and also update the agent on the NavigationServer.

Vector2 get_next_path_position ( )

Returns the next position in global coordinates that can be moved to, making sure that there are no static objects in the way. If the agent does not have a navigation path, it will return the position of the agent’s parent. The use of this function once every physics frame is required to update the internal path logic of the NavigationAgent.

RID get_rid ( ) const

Returns the RID of this agent on the NavigationServer2D.

bool is_navigation_finished ( )

Returns true if the end of the currently loaded navigation path has been reached.

Note: While true prefer to stop calling update functions like get_next_path_position. This avoids jittering the standing agent due to calling repeated path updates.

bool is_target_reachable ( )

Returns true if get_final_position is within target_desired_distance of the target_position.

bool is_target_reached ( ) const

Returns true if target_position is reached. It may not always be possible to reach the target position. It should always be possible to reach the final position though. See get_final_position.

void set_avoidance_layer_value ( int layer_number, bool value )

Based on value, enables or disables the specified layer in the avoidance_layers bitmask, given a layer_number between 1 and 32.

void set_avoidance_mask_value ( int mask_number, bool value )

Based on value, enables or disables the specified mask in the avoidance_mask bitmask, given a mask_number between 1 and 32.

void set_navigation_layer_value ( int layer_number, bool value )

Based on value, enables or disables the specified layer in the navigation_layers bitmask, given a layer_number between 1 and 32.

void set_navigation_map ( RID navigation_map )

Sets the RID of the navigation map this NavigationAgent node should use and also updates the agent on the NavigationServer.

void set_velocity_forced ( Vector2 velocity )

Replaces the internal velocity in the collision avoidance simulation with velocity. When an agent is teleported to a new position this function should be used in the same frame. If called frequently this function can get agents stuck.

Previous Next

© Copyright 2014-present Juan Linietsky, Ariel Manzur and the Godot community (CC BY 3.0). Revision 53e837c6.

Built with Sphinx using a theme provided by Read the Docs.