Filesystem

Flash layout

Even though file system is stored on the same flash chip as the program, programming new sketch will not modify file system contents. This allows to use file system to store sketch data, configuration files, or content for Web server.

The following diagram illustrates flash layout used in Arduino environment:

|--------------|-------|---------------|--|--|--|--|--|
^              ^       ^               ^     ^
Sketch    OTA update   File system   EEPROM  WiFi config (SDK)

File system size depends on the flash chip size. Depending on the board which is selected in IDE, you have the following options for flash size:

Note: to use any of file system functions in the sketch, add the following include to the sketch:

//#include "FS.h" // SPIFFS is declared
#include "LittleFS.h" // LittleFS is declared

SPIFFS Deprecation Warning

SPIFFS is currently deprecated and may be removed in future releases of the core. Please consider moving your code to LittleFS. SPIFFS is not actively supported anymore by the upstream developer, while LittleFS is under active development, supports real directories, and is many times faster for most operations.

SPIFFS and LittleFS

There are two filesystems for utilizing the onboard flash on the ESP8266: SPIFFS and LittleFS.

SPIFFS is the original filesystem and is ideal for space and RAM constrained applications that utilize many small files and care about static and dynamic wear levelling and don’t need true directory support. Filesystem overhead on the flash is minimal as well.

LittleFS is recently added and focuses on higher performance and directory support, but has higher filesystem and per-file overhead (4K minimum vs. SPIFFS’ 256 byte minimum file allocation unit).

They share a compatible API but have incompatible on-flash implementations, so it is important to choose one or the per project as attempting to mount a SPIFFS volume under LittleFS may result in a format operation and definitely will not preserve any files, and vice-versa.

The actual File and Dir objects returned from either filesystem behave in the same manner and documentation is applicable to both. To convert most applications from SPIFFS to LittleFS simply requires changing the SPIFFS.begin() to LittleFS.begin() and SPIFFS.open() to LittleFS.open() with the rest of the code remaining untouched.

SDFS and SD

FAT filesystems are supported on the ESP8266 using the old Arduino wrapper “SD.h” which wraps the “SDFS.h” filesystem transparently.

Any commands discussed below pertaining to SPIFFS or LittleFS are applicable to SD/SDFS.

For legacy applications, the classic SD filesystem may continue to be used, but for new applications, directly accessing the SDFS filesystem is recommended as it may expose additional functionality that the old Arduino SD filesystem didn’t have.

Note that in earlier releases of the core, using SD and SPIFFS in the same sketch was complicated and required the use of NO_FS_GLOBALS. The current design makes SD, SDFS, SPIFFS, and LittleFS fully source compatible and so please remove any NO_FS_GLOBALS definitions in your projects when updgrading core versions.

SPIFFS file system limitations

The SPIFFS implementation for ESP8266 had to accommodate the constraints of the chip, among which its limited RAM. SPIFFS was selected because it is designed for small systems, but that comes at the cost of some simplifications and limitations.

First, behind the scenes, SPIFFS does not support directories, it just stores a “flat” list of files. But contrary to traditional filesystems, the slash character '/' is allowed in filenames, so the functions that deal with directory listing (e.g. openDir("/website")) basically just filter the filenames and keep the ones that start with the requested prefix (/website/). Practically speaking, that makes little difference though.

Second, there is a limit of 32 chars in total for filenames. One '\0' char is reserved for C string termination, so that leaves us with 31 usable characters.

Combined, that means it is advised to keep filenames short and not use deeply nested directories, as the full path of each file (including directories, '/' characters, base name, dot and extension) has to be 31 chars at a maximum. For example, the filename /website/images/bird_thumbnail.jpg is 34 chars and will cause some problems if used, for example in exists() or in case another file starts with the same first 31 characters.

Warning: That limit is easily reached and if ignored, problems might go unnoticed because no error message will appear at compilation nor runtime.

For more details on the internals of SPIFFS implementation, see the SPIFFS readme file.

LittleFS file system limitations

The LittleFS implementation for the ESP8266 supports filenames of up to 31 characters + terminating zero (i.e. char filename[32]), and as many subdirectories as space permits.

Filenames are assumed to be in the root directory if no initial “/” is present.

Opening files in subdirectories requires specifying the complete path to the file (i.e. open("/sub/dir/file.txt");). Subdirectories are automatically created when you attempt to create a file in a subdirectory, and when the last file in a subdirectory is removed the subdirectory itself is automatically deleted. This is because there was no mkdir() method in the existing SPIFFS filesystem.

Unlike SPIFFS, the actual file descriptors are allocated as requested by the application, so in low memory conditions you may not be able to open new files. Conversely, this also means that only file descriptors used will actually take space on the heap.

Because there are directories, the openDir method behaves differently than SPIFFS. Whereas SPIFFS will return files in “subdirectories” when you traverse a Dir::next() (because they really aren’t subdirs but simply files with “/”s in their names), LittleFS will only return files in the specific subdirectory. This mimics the POSIX behavior for directory traversal most C programmers are used to.

Uploading files to file system

ESP8266FS is a tool which integrates into the Arduino IDE. It adds a menu item to Tools menu for uploading the contents of sketch data directory into ESP8266 flash file system.

Warning: Due to the move from the obsolete esptool-ck.exe to the supported esptool.py upload tool, upgraders from pre 2.5.1 will need to update the ESP8266FS tool referenced below to 0.5.0 or later. Prior versions will fail with a “esptool not found” error because they don’t know how to use esptool.py.

• Download the tool: https://github.com/esp8266/arduino-esp8266fs-plugin/releases/download/0.5.0/ESP8266FS-0.5.0.zip

• In your Arduino sketchbook directory, create tools directory if it doesn’t exist yet.

• Unpack the tool into tools directory (the path will look like <home_dir>/Arduino/tools/ESP8266FS/tool/esp8266fs.jar) If upgrading, overwrite the existing JAR file with the newer version.

• Restart Arduino IDE.

• Open a sketch (or create a new one and save it).

• Go to sketch directory (choose Sketch > Show Sketch Folder).

• Create a directory named data and any files you want in the file system there.

• Make sure you have selected a board, port, and closed Serial Monitor.

• If your board requires you to press a button (or other action) to enter bootload mode for flashing a sketch, do that now.

• Select Tools > ESP8266 Sketch Data Upload. This should start uploading the files into ESP8266 flash file system. When done, IDE status bar will display SPIFFS Image Uploaded message.

ESP8266LittleFS is the equivalent tool for LittleFS.

• Download the 2.6.0 or later version of the tool: https://github.com/earlephilhower/arduino-esp8266littlefs-plugin/releases

• Install as above

• To upload a LittleFS filesystem use Tools > ESP8266 LittleFS Data Upload

File system object (SPIFFS/LittleFS/SD/SDFS)

setConfig

SPIFFSConfig cfg;
cfg.setAutoFormat(false);
SPIFFS.setConfig(cfg);

This method allows you to configure the parameters of a filesystem before mounting. All filesystems have their own *Config (i.e. SDFSConfig or SPIFFSConfig with their custom set of options. All filesystems allow explicitly enabling/disabling formatting when mounts fail. If you do not call this setConfig method before perforing begin(), you will get the filesystem’s default behavior and configuration. By default, SPIFFS will autoformat the filesystem if it cannot mount it, while SDFS will not.

begin

SPIFFS.begin()
or LittleFS.begin()

This method mounts file system. It must be called before any other FS APIs are used. Returns true if file system was mounted successfully, false otherwise. With no options it will format SPIFFS if it is unable to mount it on the first try.

Note that both methods will automatically format the filesystem if one is not detected. This means that if you attempt a SPIFFS.begin() on a LittleFS filesystem you will lose all data on that filesystem, and vice-versa.

end

SPIFFS.end()
or LittleFS.end()

This method unmounts the file system. Use this method before updating the file system using OTA.

format

SPIFFS.format()
or LittleFS.format()

Formats the file system. May be called either before or after calling begin. Returns true if formatting was successful.

open

SPIFFS.open(path, mode)
or LittleFS.open(path, mode)

Opens a file. path should be an absolute path starting with a slash (e.g. /dir/filename.txt). mode is a string specifying access mode. It can be one of “r”, “w”, “a”, “r+”, “w+”, “a+”. Meaning of these modes is the same as for fopen C function.

r      Open text file for reading.  The stream is positioned at the
       beginning of the file.
r+     Open for reading and writing.  The stream is positioned at the
       beginning of the file.
w      Truncate file to zero length or create text file for writing.
       The stream is positioned at the beginning of the file.
w+     Open for reading and writing.  The file is created if it does
       not exist, otherwise it is truncated.  The stream is
       positioned at the beginning of the file.
a      Open for appending (writing at end of file).  The file is
       created if it does not exist.  The stream is positioned at the
       end of the file.
a+     Open for reading and appending (writing at end of file).  The
       file is created if it does not exist.  The initial file
       position for reading is at the beginning of the file, but
       output is always appended to the end of the file.

Returns File object. To check whether the file was opened successfully, use the boolean operator.

File f = SPIFFS.open("/f.txt", "w");
if (!f) {
    Serial.println("file open failed");
}

exists

SPIFFS.exists(path)
or LittleFS.exists(path)

Returns true if a file with given path exists, false otherwise.

mkdir

LittleFS.mkdir(path)

Returns true if the directory creation succeeded, false otherwise.

rmdir

LittleFS.rmdir(path)

Returns true if the directory was successfully removed, false otherwise.

openDir

SPIFFS.openDir(path)
or LittleFS.openDir(path)

Opens a directory given its absolute path. Returns a Dir object. Please note the previous discussion on the difference in behavior between LittleFS and SPIFFS for this call.

remove

SPIFFS.remove(path)
or LittleFS.remove(path)

Deletes the file given its absolute path. Returns true if file was deleted successfully.

rename

SPIFFS.rename(pathFrom, pathTo)
or LittleFS.rename(pathFrom, pathTo)

Renames file from pathFrom to pathTo. Paths must be absolute. Returns true if file was renamed successfully.

gc

SPIFFS.gc()

Only implemented in SPIFFS. Performs a quick garbage collection operation on SPIFFS, possibly making writes perform faster/better in the future. On very full or very fragmented filesystems, using this call can avoid or reduce issues where SPIFFS reports free space but is unable to write additional data to a file. See this discussion <https://github.com/esp8266/Arduino/pull/6340#discussion\_r307042268&gt; for more info.

check

SPIFFS.begin();
SPIFFS.check();

Only implemented in SPIFFS. Performs an in-depth check of the filesystem metadata and correct what is repairable. Not normally needed, and not guaranteed to actually fix anything should there be corruption.

info

FSInfo fs_info;
SPIFFS.info(fs_info);
or LittleFS.info(fs_info);

Fills FSInfo structure with information about the file system. Returns true if successful, false otherwise.

Filesystem information structure

struct FSInfo {
    size_t totalBytes;
    size_t usedBytes;
    size_t blockSize;
    size_t pageSize;
    size_t maxOpenFiles;
    size_t maxPathLength;
};

This is the structure which may be filled using FS::info method. - totalBytes — total size of useful data on the file system - usedBytes — number of bytes used by files - blockSize — filesystem block size - pageSize — filesystem logical page size - maxOpenFiles — max number of files which may be open simultaneously - maxPathLength — max file name length (including one byte for zero termination)

info64

FSInfo64 fsinfo;
SD.info(fsinfo);
or LittleFS(fsinfo);

Performs the same operation as info but allows for reporting greater than 4GB for filesystem size/used/etc. Should be used with the SD and SDFS filesystems since most SD cards today are greater than 4GB in size.

setTimeCallback(time_t (*cb)(void))

time_t myTimeCallback() {
    return 1455451200; // UNIX timestamp
}
void setup () {
    LittleFS.setTimeCallback(myTimeCallback);
    ...
    // Any files will now be made with Pris' incept date
}

The SD, SDFS, and LittleFS filesystems support a file timestamp, updated when the file is opened for writing. By default, the ESP8266 will use the internal time returned from time(NULL) (i.e. local time, not UTC, to conform to the existing FAT filesystem), but this can be overridden to GMT or any other standard you’d like by using setTimeCallback(). If your app sets the system time using NTP before file operations, then you should not need to use this function. However, if you need to set a specific time for a file, or the system clock isn’t correct and you need to read the time from an external RTC or use a fixed time, this call allows you do to so.

In general use, with a functioning time() call, user applications should not need to use this function.

Directory object (Dir)

The purpose of Dir object is to iterate over files inside a directory. It provides multiple access methods.

The following example shows how it should be used:

Dir dir = SPIFFS.openDir("/data");
// or Dir dir = LittleFS.openDir("/data");
while (dir.next()) {
    Serial.print(dir.fileName());
    if(dir.fileSize()) {
        File f = dir.openFile("r");
        Serial.println(f.size());
    }
}

next

Returns true while there are files in the directory to iterate over. It must be called before calling fileName(), fileSize(), and openFile() functions.

fileName

Returns the name of the current file pointed to by the internal iterator.

fileSize

Returns the size of the current file pointed to by the internal iterator.

fileTime

Returns the time_t write time of the current file pointed to by the internal iterator.

fileCreationTime

Returns the time_t creation time of the current file pointed to by the internal iterator.

isFile

Returns true if the current file pointed to by the internal iterator is a File.

isDirectory

Returns true if the current file pointed to by the internal iterator is a Directory.

openFile

This method takes mode argument which has the same meaning as for SPIFFS/LittleFS.open() function.

rewind

Resets the internal pointer to the start of the directory.

setTimeCallback(time_t (*cb)(void))

Sets the time callback for any files accessed from this Dir object via openNextFile. Note that the SD and SDFS filesystems only support a filesystem-wide callback and calls to Dir::setTimeCallback may produce unexpected behavior.

File object

SPIFFS/LittleFS.open() and dir.openFile() functions return a File object. This object supports all the functions of Stream, so you can use readBytes, findUntil, parseInt, println, and all other Stream methods.

There are also some functions which are specific to File object.

seek

file.seek(offset, mode)

This function behaves like fseek C function. Depending on the value of mode, it moves current position in a file as follows:

• if mode is SeekSet, position is set to offset bytes from the beginning.

• if mode is SeekCur, current position is moved by offset bytes.

• if mode is SeekEnd, position is set to offset bytes from the end of the file.

Returns true if position was set successfully.

position

file.position()

Returns the current position inside the file, in bytes.

size

file.size()

Returns file size, in bytes.

name

String name = file.name();

Returns short (no-path) file name, as const char*. Convert it to String for storage.

fullName

// Filesystem:
//   testdir/
//           file1
Dir d = LittleFS.openDir("testdir/");
File f = d.openFile("r");
// f.name() == "file1", f.fullName() == "testdir/file1"

Returns the full path file name as a const char*.

getLastWrite

Returns the file last write time, and only valid for files opened in read-only mode. If a file is opened for writing, the returned time may be indeterminate.

getCreationTime

Returns the file creation time, if available.

isFile

bool amIAFile = file.isFile();

Returns true if this File points to a real file.

isDirectory

bool amIADir = file.isDir();

Returns true if this File points to a directory (used for emulation of the SD.* interfaces with the openNextFile method).

close

file.close()

Close the file. No other operations should be performed on File object after close function was called.

openNextFile (compatibiity method, not recommended for new code)

File root = LittleFS.open("/");
File file1 = root.openNextFile();
File files = root.openNextFile();

Opens the next file in the directory pointed to by the File. Only valid when File.isDirectory() == true.

rewindDirectory (compatibiity method, not recommended for new code)

File root = LittleFS.open("/");
File file1 = root.openNextFile();
file1.close();
root.rewindDirectory();
file1 = root.openNextFile(); // Opens first file in dir again

Resets the openNextFile pointer to the top of the directory. Only valid when File.isDirectory() == true.

setTimeCallback(time_t (*cb)(void))

Sets the time callback for this specific file. Note that the SD and SDFS filesystems only support a filesystem-wide callback and calls to Dir::setTimeCallback may produce unexpected behavior.