Get Started

Quick Install

The full package of TDengine includes the server(taosd), taosAdapter for connecting with third-party systems and providing a RESTful interface, client driver(taosc), command-line program(CLI, taos) and some tools. For the current version, the server taosd and taosAdapter can only be installed and run on Linux systems. In the future taosd and taosAdapter will also be supported on Windows, macOS and other systems. The client driver taosc and TDengine CLI can be installed and run on Windows or Linux. In addition to connectors for multiple languages, TDengine also provides a RESTful interface through taosAdapter. Prior to version 2.4.0.0, taosAdapter did not exist and the RESTful interface was provided by the built-in HTTP service of taosd.

TDengine supports X64/ARM64/MIPS64/Alpha64 hardware platforms, and will support ARM32, RISC-V and other CPU architectures in the future.

  • Docker
  • apt-get
  • Package
  • Source Code

If docker is already installed on your computer, execute the following command:

  1. docker run -d -p 6030-6049:6030-6049 -p 6030-6049:6030-6049/udp tdengine/tdengine

Make sure the container is running

  1. docker ps

Enter into container and execute bash

  1. docker exec -it <container name> bash

Then you can execute the Linux commands and access TDengine.

For detailed steps, please visit Experience TDengine via Docker.

Get Started - 图1info

Starting from 2.4.0.10，besides taosd，TDengine docker image includes: taos，taosAdapter，taosdump，taosBenchmark，TDinsight, scripts and sample code. Once the TDengine container is started，it will start both taosAdapter and taosd automatically to support RESTful interface.

apt-get can be used to install TDengine from official package repository.

Package Repository

  1. wget -qO - http://repos.taosdata.com/tdengine.key | sudo apt-key add -
  2. echo "deb [arch=amd64] http://repos.taosdata.com/tdengine-stable stable main" | sudo tee /etc/apt/sources.list.d/tdengine-stable.list

The repository required for installing beta versions can be configured as below:

  1. echo "deb [arch=amd64] http://repos.taosdata.com/tdengine-beta beta main" | sudo tee /etc/apt/sources.list.d/tdengine-beta.list

Install With apt-get

  1. sudo apt-get update
  2. apt-cache policy tdengine
  3. sudo apt-get install tdengine
Get Started - 图2tip

apt-get can only be used on Debian or Ubuntu Linux.

It’s very easy to install TDengine and would take you only a few minutes from downloading to finishing installation.

For the convenience of users, from version 2.4.0.10, the standard server side installation package includes taos, taosd, taosAdapter, taosBenchmark and sample code. If only the taosd server and C/C++ connector are required, you can also choose to download the lite package.

Three kinds of packages are provided, tar.gz, rpm and deb. Especially the tar.gz package is provided for the convenience of enterprise customers on different kinds of operating systems, it includes taosdump and TDinsight installation script which are normally only provided in taos-tools rpm and deb packages.

Between two major release versions, some beta versions may be delivered for users to try some new features.

Enter your email to receive the download link

TDengine Database

encn

Agree to TDengine to contact me via this email addressDownload

Close

For the details please refer to Install and Uninstall.

To see the details of versions, please refer to Download List and Release Notes.

If you like to check the source code, build the package by yourself or contribute to the project, please check TDengine GitHub Repository

Quick Launch

After installation, you can launch the TDengine service by the ‘systemctl’ command to start ‘taosd’.

  1. systemctl start taosd

Check if taosd is running：

  1. systemctl status taosd

If everything is fine, you can run TDengine command-line interface taos to access TDengine and test it out yourself.

Get Started - 图4info
  • systemctl requires root privileges，if you are not root ，please add sudo before the command.
  • To get feedback and keep improving the product, TDengine is collecting some basic usage information, but you can turn it off by setting telemetryReporting to 0 in configuration file taos.cfg.
  • TDengine uses FQDN (usually hostname）as the ID for a node. To make the system work, you need to configure the FQDN for the server running taosd, and configure the DNS service or hosts file on the the machine where the application or TDengine CLI runs to ensure that the FQDN can be resolved.
  • systemctl stop taosd won’t stop the server right away, it will wait until all the data in memory are flushed to disk. It may takes time depending on the cache size.

TDengine supports the installation on system which runs systemd for process management，use which systemctl to check if the system has systemd installed:

  1. which systemctl

If the system does not have systemd，you can start TDengine manually by executing /usr/local/taos/bin/taosd

Command Line Interface

To manage the TDengine running instance，or execute ad-hoc queries, TDengine provides a Command Line Interface (hereinafter referred to as TDengine CLI) taos. To enter into the interactive CLI，execute taos on a Linux terminal where TDengine is installed.

  1. taos

If it connects to the TDengine server successfully, it will print out the version and welcome message. If it fails, it will print out the error message, please check FAQ for trouble shooting connection issue. TDengine CLI’s prompt is：

  1. taos>

Inside TDengine CLI，you can execute SQL commands to create/drop database/table, and run queries. The SQL command must be ended with a semicolon. For example:

  1. create database demo;
  2. use demo;
  3. create table t (ts timestamp, speed int);
  4. insert into t values ('2019-07-15 00:00:00', 10);
  5. insert into t values ('2019-07-15 01:00:00', 20);
  6. select * from t;
  7.            ts            |    speed    |
  8. ========================================
  9.  2019-07-15 00:00:00.000 |          10 |
  10.  2019-07-15 01:00:00.000 |          20 |
  11. Query OK, 2 row(s) in set (0.003128s)

Besides executing SQL commands, system administrators can check running status, add/drop user accounts and manage the running instances. TDengine CLI with client driver can be installed and run on either Linux or Windows machines. For more details on CLI, please check here.

Experience the blazing fast speed

After TDengine server is running，execute taosBenchmark (previously named taosdemo) from a Linux terminal：

  1. taosBenchmark

This command will create a super table “meters” under database “test”. Under “meters”, 10000 tables are created with names from “d0” to “d9999”. Each table has 10000 rows and each row has four columns (ts, current, voltage, phase). Time stamp is starting from “2017-07-14 10:40:00 000” to “2017-07-14 10:40:09 999”. Each table has tags “location” and “groupId”. groupId is set 1 to 10 randomly, and location is set to “California.SanFrancisco” or “California.SanDiego”.

This command will insert 100 million rows into the database quickly. Time to insert depends on the hardware configuration, it only takes a dozen seconds for a regular PC server.

taosBenchmark provides command-line options and a configuration file to customize the scenarios, like number of tables, number of rows per table, number of columns and more. Please execute taosBenchmark --help to list them. For details on running taosBenchmark, please check reference for taosBenchmark

Experience query speed

After using taosBenchmark to insert a number of rows data, you can execute queries from TDengine CLI to experience the lightning fast query speed.

query the total number of rows under super table “meters”：

  1. taos> select count(*) from test.meters;

query the average, maximum, minimum of 100 million rows:

  1. taos> select avg(current), max(voltage), min(phase) from test.meters;

query the total number of rows with location=”California.SanFrancisco”:

  1. taos> select count(*) from test.meters where location="California.SanFrancisco";

query the average, maximum, minimum of all rows with groupId=10:

  1. taos> select avg(current), max(voltage), min(phase) from test.meters where groupId=10;

query the average, maximum, minimum for table d10 in 10 seconds time interval：

  1. taos> select avg(current), max(voltage), min(phase) from test.d10 interval(10s);