1 Zabbix agent - Windows-specific item keys - 《Zabbix 5.0 MANUAL》

Windows-specific item keys

Windows-specific item keys

Item keys

The table provides details on the item keys that you can use with Zabbix Windows agent only.

Key
	Description	Return value	Parameters	Comments

eventlog[name,<regexp>,<severity>,<source>,<eventid>,<maxlines>,<mode>]
	Event log monitoring.	Log	name - name of event log regexp - regular expression describing the required pattern severity - regular expression describing severity This parameter accepts the following values: “Information”, “Warning”, “Error”, “Critical”, “Verbose” (since Zabbix 2.2.0 running on Windows Vista or newer) source - regular expression describing source identifier (regular expression is supported since Zabbix 2.2.0) eventid - regular expression describing the event identifier(s) maxlines - maximum number of new lines per second the agent will send to Zabbix server or proxy. This parameter overrides the value of ‘MaxLinesPerSecond’ in zabbixagentd.win.conf mode - possible values: all (default), skip - skip processing of older data (affects only newly created items).	The item must be configured as an active check. Examples: ⇒ eventlog[Application] ⇒ eventlog[Security,,”Failure Audit”,,^(529\|680)$] ⇒ eventlog[System,,”Warning\|Error”] ⇒ eventlog[System,,,,^1$] ⇒ eventlog[System,,,,@TWOSHORT] - here a custom regular expression named `TWOSHORT` is referenced (defined as a Result is TRUE type, the expression itself being `^1$\|^70$`). Note that the agent is unable to send in events from the “Forwarded events” log. The `mode` parameter is supported since Zabbix 2.0.0. “Windows Eventing 6.0” is supported since Zabbix 2.2.0. Note that selecting a non-Log type of information for this item will lead to the loss of local timestamp, as well as log severity and source information. See also additional information on log monitoring.

net.if.list
	Network interface list (includes interface type, status, IPv4 address, description).	Text		Supported since Zabbix agent version 1.8.1. Multi-byte interface names supported since Zabbix agent version 1.8.6. Disabled interfaces are not listed. Note that enabling/disabling some components may change their ordering in the Windows interface name. Some Windows versions (for example, Server 2008) might require the latest updates installed to support non-ASCII characters in interface names.

perf_counter[counter,<interval>]
	Value of any Windows performance counter.	Integer, float, string or text (depending on the request)	counter - path to the counter interval - last N seconds for storing the average value. The `interval` must be between 1 and 900 seconds (included) and the default value is 1.	Performance Monitor can be used to obtain list of available counters. Until version 1.6 this parameter will return correct value only for counters that require just one sample (like \System\Threads). It will not work as expected for counters that require more that one sample - like CPU utilization. Since 1.6, `interval` is used, so the check returns an average value for last “interval” seconds every time. See also: Windows performance counters.

perf_counter_en[counter,<interval>]
	Value of any Windows performance counter in English.	Integer, float, string or text (depending on the request)	counter - path to the counter in English interval - last N seconds for storing the average value. The `interval` must be between 1 and 900 seconds (included) and the default value is 1.	This item is only supported on Windows Server 2008/Vista and above. You can find the list of English strings by viewing the following registry key: `HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib\009`. Supported since Zabbix agent versions 4.0.13 and 4.2.7.

perf_instance.discovery[object]
	List of object instances of Windows performance counters. Used for low-level discovery.	JSON object	object - object name (localized)	Supported since Zabbix agent version 5.0.1.

perf_instance_en.discovery[object]
	List of object instances of Windows performance counters, discovered using object names in English. Used for low-level discovery.	JSON object	object - object name (in English)	Supported since Zabbix agent version 5.0.1.

proc_info[process,<attribute>,<type>]
	Various information about specific process(es).	Float	process - process name attribute - requested process attribute type - representation type (meaningful when more than one process with the same name exists)	The following `attributes` are supported: vmsize (default) - size of process virtual memory in Kbytes wkset - size of process working set (amount of physical memory used by process) in Kbytes pf - number of page faults ktime - process kernel time in milliseconds utime - process user time in milliseconds io_read_b - number of bytes read by process during I/O operations io_read_op - number of read operation performed by process io_write_b - number of bytes written by process during I/O operations io_write_op - number of write operation performed by process io_other_b - number of bytes transferred by process during operations other than read and write operations io_other_op - number of I/O operations performed by process, other than read and write operations gdiobj - number of GDI objects used by process userobj - number of USER objects used by process Valid `types` are: avg (default) - average value for all processes named <process> min - minimum value among all processes named <process> max - maximum value among all processes named <process> sum - sum of values for all processes named <process> Examples: ⇒ proc_info[iexplore.exe,wkset,sum] - to get the amount of physical memory taken by all Internet Explorer processes ⇒ proc_info[iexplore.exe,pf,avg] - to get the average number of page faults for Internet Explorer processes Note that on a 64-bit system, a 64-bit Zabbix agent is required for this item to work correctly. Note: io, gdiobj and userobj attributes are available only on Windows 2000 and later versions of Windows, not on Windows NT 4.0.

service.discovery
	List of Windows services. Used for low-level discovery.	JSON object		Supported since Zabbix agent version 3.0.

service.info[service,<param>]
	Information about a service.	Integer - with `param` as state, startup String - with `param` as displayname, path, user Text - with `param` as description Specifically for state: 0 - running, 1 - paused, 2 - start pending, 3 - pause pending, 4 - continue pending, 5 - stop pending, 6 - stopped, 7 - unknown, 255 - no such service Specifically for startup: 0 - automatic, 1 - automatic delayed, 2 - manual, 3 - disabled, 4 - unknown, 5 - automatic trigger start, 6 - automatic delayed trigger start, 7 - manual trigger start	service - a real service name or its display name as seen in MMC Services snap-in param - state (default), displayname, path, user, startup or description	Examples: ⇒ service.info[SNMPTRAP] - state of the SNMPTRAP service ⇒ service.info[SNMP Trap] - state of the same service, but with display name specified ⇒ service.info[EventLog,startup] - startup type of the EventLog service Items service.info[service,state] and service.info[service] will return the same information. Note that only with `param` as state this item returns a value for non-existing services (255). This item is supported since Zabbix 3.0.0. It should be used instead of the deprecated service_state[service] item.

services[<type>,<state>,<exclude>]
	Listing of services.	0 - if empty Text - list of services separated by a newline	type - all (default), automatic, manual or disabled state - all (default), stopped, started, start_pending, stop_pending, running, continue_pending, pause_pending or paused exclude - services to exclude from the result. Excluded services should be listed in double quotes, separated by comma, without spaces.	Examples: ⇒ services[,started] - list of started services ⇒ services[automatic, stopped] - list of stopped services, that should be run ⇒ services[automatic, stopped, “service1,service2,service3”] - list of stopped services, that should be run, excluding services with names service1, service2 and service3 The `exclude` parameter is supported since Zabbix 1.8.1.

wmi.get[<namespace>,<query>]
	Execute WMI query and return the first selected object.	Integer, float, string or text (depending on the request)	namespace - WMI namespace query - WMI query returning a single object	WMI queries are performed with WQL. Example: ⇒ wmi.get[root\cimv2,select status from Win32_DiskDrive where Name like ‘%PHYSICALDRIVE0%’] - returns the status of the first physical disk This key is supported since Zabbix 2.2.0.

wmi.getall[<namespace>,<query>]
	Execute WMI query and return the whole response. Can be used for low-level discovery.	JSON object	namespace - WMI namespace query - WMI query	WMI queries are performed with WQL. Example: ⇒ wmi.getall[root\cimv2,select from Win32_DiskDrive where Name like ‘%PHYSICALDRIVE%’] - returns status information of physical disks JSONPath preprocessing can be used to point to more specific values in the returned JSON. This key is supported since Zabbix 4.4.0.

vm.vmemory.size[<type>]
	Virtual memory size in bytes or in percentage from total.	Integer - for bytes Float - for percentage	type - possible values: available (available virtual memory), pavailable (available virtual memory, in percent), pused (used virtual memory, in percent), total (total virtual memory, default), used (used virtual memory)	Example: ⇒ vm.vmemory.size[pavailable] → available virtual memory, in percentage Monitoring of virtual memory statistics is based on: Total virtual memory on Windows (total physical + page file size); The maximum amount of memory Zabbix agent can commit; * The current committed memory limit for the system or Zabbix agent, whichever is smaller. This key is supported since Zabbix 3.0.7 and 3.2.3.

Monitoring Windows services

This tutorial provides step-by-step instructions for setting up the monitoring of Windows services. It is assumed that Zabbix server and agent are configured and operational.

Step 1

Get the service name.

You can get that name by going to MMC Services snap-in and bringing up the properties of the service. In the General tab you should see a field called ‘Service name’. The value that follows is the name you will use when setting up an item for monitoring.

For example, if you wanted to monitor the “workstation” service then your service might be: lanmanworkstation.

Step 2

Configure an item for monitoring the service.

The item service.info[service,<param>] retrieves the information about a particular service. Depending on the information you need, specify the param option which accepts the following values: displayname, state, path, user, startup or description. The default value is state if param is not specified (service.info[service]).

The type of return value depends on chosen param: integer for state and startup; character string for displayname, path and user; text for description.

Example:

Key: service.info[lanmanworkstation]
Type of information: Numeric (unsigned)
Show value: select the Windows service state value mapping

Two value maps are available Windows service state and Windows service startup type to map a numerical value to a text representation in the Frontend.

Discovery of Windows services

Low-level discovery provides a way to automatically create items, triggers, and graphs for different entities on a computer. Zabbix can automatically start monitoring Windows services on your machine, without the need to know the exact name of a service or create items for each service manually. A filter can be used to generate real items, triggers, and graphs only for services of interest.