Security settings

The Security plugin provides a number of YAML configuration files that are used to store the necessary settings that define the way the Security plugin manages users, roles, and activity within the cluster. For a full list of the Security plugin configuration files, see Modifying the YAML files.

The following sections describe security-related settings in opensearch.yml. To learn more about static and dynamic settings, see Configuring OpenSearch.

Common settings

The Security plugin supports the following common settings:

  • plugins.security.nodes_dn (Static): Specifies a list of distinguished names (DNs) that denote the other nodes in the cluster. This setting supports wildcards and regular expressions. The list of DNs are also read from the security index in addition to the YAML configuration when plugins.security.nodes_dn_dynamic_config_enabled is true.

  • plugins.security.nodes_dn_dynamic_config_enabled (Static): Relevant for cross_cluster use cases where there is a need to manage the allow listed nodes_dn without having to restart the nodes every time a new cross_cluster remote is configured. Setting nodes_dn_dynamic_config_enabled to true enables super-admin callable Distinguished Names APIs, which provide means to update or retrieve nodes_dn dynamically. This setting only has effect if plugins.security.cert.intercluster_request_evaluator_class is not set. Default is false.

  • plugins.security.authcz.admin_dn (Static): Defines the DNs of certificates to which admin privileges should be assigned. Required.

  • plugins.security.roles_mapping_resolution (Static): Defines how backend roles are mapped to Security roles.

    Valid values are:

    • MAPPING_ONLY(Default): Mappings must be configured explicitly in roles_mapping.yml.
    • BACKENDROLES_ONLY: Backend roles are mapped to security roles directly. Settings in roles_mapping.yml have no effect.
    • BOTH: Backend roles are mapped to security roles both directly and through roles_mapping.yml.

  • plugins.security.dls.mode (Static): Sets the document-level security (DLS) evaluation mode. Default is adaptive. See How to set the DLS evaluation mode.

  • plugins.security.compliance.salt (Static): The salt to use when generating the hash value for field masking. Must be at least 32 characters. Only ASCII characters are allowed. Optional.

  • plugins.security.compliance.immutable_indices (Static): Documents in indexes that are marked as immutable follow the write-once, read-many paradigm. Documents created in these indexes cannot be changed and are therefore immutable.

  • config.dynamic.http.anonymous_auth_enabled (Static): Enables anonymous authentication. This will cause all HTTP authenticators to not challenge. Default is false.

  • http.detailed_errors.enabled (Static): Enables a detailed error message for REST calls performed against the OpenSearch cluster. If set to true, provides the root_cause together with the error code. Default is true.

REST management API settings

The Security plugin supports the following REST management API settings:

  • plugins.security.restapi.roles_enabled (Static): Enables role-based access to the REST management API for listed roles. Roles are separated by a comma. Default is an empty list (no role is allowed to access the REST management API). See Access control for the API.

  • plugins.security.restapi.endpoints_disabled.<role>.<endpoint> (Static): Disables specific endpoints and their HTTP methods for roles. Values for this setting compose an array of HTTP methods. For example: plugins.security.restapi.endpoints_disabled.all_access.ACTIONGROUPS: ["PUT","POST","DELETE"]. By default, all endpoints and methods are allowed. Existing endpoints include ACTIONGROUPS, CACHE, CONFIG, ROLES, ROLESMAPPING, INTERNALUSERS, SYSTEMINFO, PERMISSIONSINFO, and LICENSE. See Access control for the API.

  • plugins.security.restapi.password_validation_regex (Static): Specifies a regular expression to set the criteria for the login password. For more information, see Password settings.

  • plugins.security.restapi.password_validation_error_message (Static): Specifies an error message that loads when a password doesn’t pass validation. This setting is used in conjunction with plugins.security.restapi.password_validation_regex.

  • plugins.security.restapi.password_min_length (Static): Sets the minimum number of characters for the password length when using the score-based password strength estimator. The default is 8. This is also the minimum. For more information, see Password settings.

  • plugins.security.restapi.password_score_based_validation_strength (Static): Sets a threshold to determine whether the password is strong or weak. Valid values are fair, good, strong, and very_strong. This setting is used in conjunction with plugins.security.restapi.password_min_length.

  • plugins.security.unsupported.restapi.allow_securityconfig_modification (Static): Enables the use of the PUT and PATCH methods for the configuration APIs.

Advanced settings

The Security plugin supports the following advanced settings:

  • plugins.security.authcz.impersonation_dn (Static): Enables transport layer impersonation. This allows DNs to impersonate as other users. See User impersonation.

  • plugins.security.authcz.rest_impersonation_user (Static): Enables REST layer impersonation. This allows users to impersonate as other users. See User impersonation.

  • plugins.security.allow_default_init_securityindex (Static): When set to true, OpenSearch Security will automatically initialize the configuration index with the files in the /config directory if the index does not exist.

    This will use well-known default passwords. Use only in a private network/environment.

  • plugins.security.allow_unsafe_democertificates (Static): When set to true, OpenSearch starts up with demo certificates. These certificates are issued only for demo purposes.

    These certificates are well known and therefore unsafe for production. Use only in a private network/environment.

  • plugins.security.system_indices.permission.enabled (Static): Enables the system index permissions feature. When set to true, the feature is enabled and users with permission to modify roles can create roles that include permissions that grant access to system indexes. When set to false, the permission is disabled and only admins with an admin certificate can make changes to system indexes. By default, the permission is set to false in a new cluster.

Expert-level settings

An expert-level setting should only be configured and deployed by an admin who understands the feature completely. Misunderstandings of a feature can lead to security risks, cause the Security plugin to not operate properly, or cause data loss.

The Security plugin supports the following expert-level settings:

  • plugins.security.config_index_name (Static): The name of the index where .opendistro_security stores its configuration.

  • plugins.security.cert.oid (Static): Defines the Object Identifier (OID) of server node certificates.

  • plugins.security.cert.intercluster_request_evaluator_class (Static): Specifies the implementation of org.opensearch.security.transport.InterClusterRequestEvaluator that is used to evaluate intercluster requests. Instances of org.opensearch.security.transport.InterClusterRequestEvaluator must implement a single-argument constructor that takes an org.opensearch.common.settings.Settings object.

  • plugins.security.enable_snapshot_restore_privilege (Static): When set to false, this setting disables snapshot restore for regular users. In this case, only snapshot restore requests signed by an admin TLS certificate are accepted. When set to true (default), regular users can restore snapshots if they have the cluster:admin/snapshot/restore, indices:admin/create, and indices:data/write/index privileges.

    A snapshot can only be restored when it does not contain global state and does not restore the .opendistro_security index.

  • plugins.security.check_snapshot_restore_write_privileges (Static): When set to false, additional index checks are omitted. When set to the default of true, attempts to restore snapshots are evaluated for indices:admin/create and "indices:data/write/index.

  • plugins.security.cache.ttl_minutes (Static): Determines how long it takes for authentication caching to time out. The authentication cache helps speed up authentication by temporarily storing user objects returned from the backend so that the Security plugin is not required to make repeated requests for them. Set the value in minutes. The default is 60. Disable caching by setting the value to 0.

  • plugins.security.disabled (Static): Disables OpenSearch Security.

    Disabling this plugin can expose your configuration (including passwords) to the public.

  • plugins.security.protected_indices.enabled (Static): If set to true, enables protected indexes. Protected indexes are even more secure than regular indexes. These indexes require a role to access like any other traditional index and require an additional role to be visible. This setting is used in conjunction with the plugins.security.protected_indices.roles and plugins.security.protected_indices.indices settings.

  • plugins.security.protected_indices.roles (Static): Specifies a list of roles to which a user must be mapped to access protected indexes.

  • plugins.security.protected_indices.indices (Static): Specifies a list of indexes to mark as protected. These indexes will only be visible to users mapped to the roles specified in plugins.security.protected_indices.roles. After this requirement is fulfilled, a user will still need to be mapped to the traditional role used to grant access permission to the index.

  • plugins.security.system_indices.enabled (Static): If set to true, enables system indexes. System indexes are similar to the security index, except that the contents are not encrypted. Indexes configured as system indexes can be accessed by either a super-admin or a user with a role that includes the system index permission. For more information about system indexes, see System indexes.

  • plugins.security.system_indices.indices (Static): A list of indexes to be used as system indexes. This setting is controlled by the plugins.security.system_indices.enabled setting.

  • plugins.security.allow_default_init_securityindex (Static): When set to true, sets the Security plugin to its default security settings if an attempt to create the security index fails when OpenSearch launches. Default security settings are stored in YAML files contained in the opensearch-project/security/config directory. Default is false.

  • plugins.security.cert.intercluster_request_evaluator_class (Static): A class to be used for evaluating intercluster communication.

  • plugins.security.enable_snapshot_restore_privilege (Static): Enables granting the snapshot restore privilege. Optional. Default is true.

  • plugins.security.check_snapshot_restore_write_privileges (Static): Enforces write privilege evaluation when creating snapshots. Default is true.

Audit log settings

The Security plugin supports the following audit log settings:

  • plugins.security.audit.enable_rest (Dynamic): Enables or disables REST request logging. Default is true (enable).

  • plugins.security.audit.enable_transport (Dynamic): Enables or disables transport-level request logging. Default is false (disable).

  • plugins.security.audit.resolve_bulk_requests (Dynamic): Enable or disable bulk request logging. When enabled, all subrequests in bulk requests are also logged. Default is false (disabled).

  • plugins.security.audit.config.disabled_categories (Dynamic): Disables the specified event categories.

  • plugins.security.audit.ignore_requests (Dynamic): Excludes the specified requests from being logged. Allows wildcards and regular expressions containing actions or REST request paths.

  • plugins.security.audit.threadpool.size (Static): Determines the number of threads in the thread pool used to log events. Default is 10. Setting this value to 0 disables the thread pool, which means the plugin logs events synchronously.

  • plugins.security.audit.threadpool.max_queue_len (Static): Sets the maximum queue length per thread. Default is 100000.

  • plugins.security.audit.ignore_users (Dynamic): An array of users. Audit requests from the users in the list will not be logged.

  • plugins.security.audit.type (Static): The destination of audit log events. Valid values are internal_opensearch, external_opensearch, debug, and webhook.

  • plugins.security.audit.config.http_endpoints (Static): A list of endpoints for localhost.

  • plugins.security.audit.config.index (Static): The audit log index. The default is auditlog6. The index can be static or an index that includes a date so that it rotates on a daily basis, for example, "'auditlog6-'YYYY.MM.dd". In either case, make sure to secure the index properly.

  • plugins.security.audit.config.type (Static): Specify the audit log type as auditlog.

  • plugins.security.audit.config.username (Static): Username for the audit log configuration.

  • plugins.security.audit.config.password (Static): Password for the audit log configuration.

  • plugins.security.audit.config.enable_ssl (Static): Enables or disables SSL for audit logging.

  • plugins.security.audit.config.verify_hostnames (Static): Enables or disables verification of the hostname for SSL/TLS certificates. Default is true (enabled).

  • plugins.security.audit.config.enable_ssl_client_auth (Static): Enables or disables SSL/TLS client authentication. Default is false (disabled).

  • plugins.security.audit.config.cert_alias (Static): An alias to the certificate used for audit log access.

  • plugins.security.audit.config.pemkey_filepath (Static): The /config relative file path to the Privacy Enhanced Mail (PEM) key used for audit logging.

  • plugins.security.audit.config.pemkey_content (Static): The base64-encoded content of the PEM key used for audit logging. This is an alternative to ...config.pemkey_filepath.

  • plugins.security.audit.config.pemkey_password (Static): Password for the PEM-formatted private key used by the client.

  • plugins.security.audit.config.pemcert_filepath (Static): The /config relative file path to the PEM certificate used for audit logging.

  • plugins.security.audit.config.pemcert_content (Static): The base64-encoded content of the PEM certificate used for audit logging. This is an alternative to specifying the file path with ...config.pemcert_filepath.

  • plugins.security.audit.config.pemtrustedcas_filepath (Static): The /config relative filepath to trusted root certificate authority.

  • plugins.security.audit.config.pemtrustedcas_content (Static): The base64-encoded content of the root certificate authority. This is an alternative to ...config.pemtrustedcas_filepath.

  • plugins.security.audit.config.webhook.url (Static): The webhook URL.

  • plugins.security.audit.config.webhook.format (Static): The format used for the webhook. Valid values are URL_PARAMETER_GET, URL_PARAMETER_POST, TEXT, JSON, and SLACK.

  • plugins.security.audit.config.webhook.ssl.verify (Static): Enables or disables verification of any SSL/TLS certificates sent with any webhook request. Default is true (enabled).

  • plugins.security.audit.config.webhook.ssl.pemtrustedcas_filepath (Static): The /config relative file path to trusted certificate authority against which webhook requests are verified.

  • plugins.security.audit.config.webhook.ssl.pemtrustedcas_content (Static): The base64-encoded content of the certificate authority used to verify webhook requests. This is an alternative to ...config.pemtrustedcas_filepath.

  • plugins.security.audit.config.log4j.logger_name (Static): A custom name for the Log4j logger.

  • plugins.security.audit.config.log4j.level (Static): Provides a default log level for the Log4j logger. Valid values are OFF, FATAL, ERROR, WARN, INFO, DEBUG, TRACE, and ALL. Default is INFO.

  • opendistro_security.audit.config.disabled_rest_categories (Dynamic): A list of REST categories to be ignored by the logger. Valid values are AUTHENTICATED and GRANTED_PRIVILEGES.

  • opendistro_security.audit.config.disabled_transport_categories (Dynamic): A list of transport layer categories to be ignored by the logger. Valid values are AUTHENTICATED and GRANTED_PRIVILEGES.

Hostname verification and DNS lookup settings

The Security plugin supports the following hostname verification and DNS lookup settings:

  • plugins.security.ssl.transport.enforce_hostname_verification (Static): Whether to verify hostnames on the transport layer. Optional. Default is true.

  • plugins.security.ssl.transport.resolve_hostname (Static): Whether to resolve hostnames against DNS on the transport layer. Optional. Default is true. Only works if hostname verification is enabled.

For more information, see Hostname verification and DNS lookup.

Client authentication settings

The Security plugin supports the following client authentication setting:

  • plugins.security.ssl.http.clientauth_mode (Static): The TLS client authentication mode to use. Valid values are OPTIONAL (default), REQUIRE, and NONE. Optional.

For more information, see Client authentication.

Enabled cipher and protocol settings

The Security plugin supports the following enabled cipher and protocol settings. Each setting must be expressed in an array:

  • plugins.security.ssl.http.enabled_ciphers (Static): Enabled TLS cipher suites for the REST layer. Only Java format is supported.

  • plugins.security.ssl.http.enabled_protocols (Static): Enabled TLS protocols for the REST layer. Only Java format is supported.

  • plugins.security.ssl.transport.enabled_ciphers (Static): Enabled TLS cipher suites for the transport layer. Only Java format is supported.

  • plugins.security.ssl.transport.enabled_protocols (Static): Enabled TLS protocols for the transport layer. Only Java format is supported.

For more information, see Enabled ciphers and protocols.

Key store and trust store files—transport layer TLS settings

The Security plugin supports the following transport layer TLS key store and trust store settings:

  • plugins.security.ssl.transport.keystore_type (Static): The type of the key store file. Optional. Valid values are JKS or PKCS12/PFX. Default is JKS.

  • plugins.security.ssl.transport.keystore_filepath (Static): The path to the key store file, which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.transport.keystore_alias (Static): The key store alias name. Optional. Default is the first alias.

  • plugins.security.ssl.transport.keystore_password (Static): The key store password. Default is changeit.

  • plugins.security.ssl.transport.truststore_type (Static): The type of the trust store file. Optional. Valid values are JKS or PKCS12/PFX. Default is JKS.

  • plugins.security.ssl.transport.truststore_filepath (Static): The path to the trust store file, which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.transport.truststore_alias (Static): The trust store alias name. Optional. Default is all certificates.

  • plugins.security.ssl.transport.truststore_password (Static): The trust store password. Default is changeit.

For more information about key store and trust store files, see Transport layer TLS.

Key store and trust store files—REST layer TLS settings

The Security plugin supports the following REST layer TLS key store and trust store settings:

  • plugins.security.ssl.http.enabled (Static): Whether to enable TLS on the REST layer. If enabled, only HTTPS is allowed. Optional. Default is false.

  • plugins.security.ssl.http.keystore_type (Static): The type of the key store file. Optional. Valid values are JKS or PKCS12/PFX. Default is JKS.

  • plugins.security.ssl.http.keystore_filepath (Static): The path to the key store file, which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.http.keystore_alias (Static): The key store alias name. Optional. Default is the first alias.

  • plugins.security.ssl.http.keystore_password: The key store password. Default is changeit.

  • plugins.security.ssl.http.truststore_type: The type of the trust store file. Optional. Valid values are JKS or PKCS12/PFX. Default is JKS.

  • plugins.security.ssl.http.truststore_filepath: The path to the trust store file, which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.http.truststore_alias (Static): The trust store alias name. Optional. Default is all certificates.

  • plugins.security.ssl.http.truststore_password (Static): The trust store password. Default is changeit.

For more information, see REST layer TLS.

OpenSSL settings

The Security plugin supports the following OpenSSL settings:

  • plugins.security.ssl.transport.enable_openssl_if_available (Static): Enables OpenSSL on the transport layer if available. Optional. Default is true.

  • plugins.security.ssl.http.enable_openssl_if_available (Static): Enables OpenSSL on the REST layer if available. Optional. Default is true.

For more information, see OpenSSL.

X.509 PEM certificates and PKCS #8 keys—transport layer TLS settings

The Security plugin supports the following transport layer TLS settings related to X.509 PEM certificates and PKCS #8 keys:

  • plugins.security.ssl.transport.pemkey_filepath (Static): The path to the certificate’s key file (PKCS #8), which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.transport.pemkey_password (Static): The key password. Omit this setting if the key has no password. Optional.

  • plugins.security.ssl.transport.pemcert_filepath (Static): The path to the X.509 node certificate chain (PEM format), which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.transport.pemtrustedcas_filepath (Static): The path to the root certificate authorities (PEM format), which must be under the config directory, specified using a relative path. Required.

For more information, see REST layer TLS.

X.509 PEM certificates and PKCS #8 keys—REST layer TLS settings

The Security plugin supports the following REST layer TLS settings related to X.509 PEM certificates and PKCS #8 keys:

  • plugins.security.ssl.http.enabled (Static): Whether to enable TLS on the REST layer. If enabled, only HTTPS is allowed. Optional. Default is false.

  • plugins.security.ssl.http.pemkey_filepath (Static): The path to the certificate’s key file (PKCS #8), which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.http.pemkey_password (Static): The key password. Omit this setting if the key has no password. Optional.

  • plugins.security.ssl.http.pemcert_filepath (Static): The path to the X.509 node certificate chain (PEM format), which must be under the config directory, specified using a relative path. Required.

  • plugins.security.ssl.http.pemtrustedcas_filepath: The path to the root certificate authorities (PEM format), which must be under the config directory, specified using a relative path. Required.

For more information, see REST layer TLS.

Transport layer security settings

The Security plugin supports the following transport layer security settings:

  • plugins.security.ssl.transport.enabled (Static): Whether to enable TLS on the REST layer.

  • plugins.security.ssl.transport.client.pemkey_password (Static): The password for the PEM-formatted private key used by the transport client.

  • plugins.security.ssl.transport.keystore_keypassword (Static): The password for the key inside the key store.

  • plugins.security.ssl.transport.server.keystore_keypassword (Static): The password for the key inside the server key store.

  • plugins.sercurity.ssl.transport.server.keystore_alias (Static): The alias name for the key store of the server.

  • plugins.sercurity.ssl.transport.client.keystore_alias (Static): The alias name for the key store of the client.

  • plugins.sercurity.ssl.transport.server.truststore_alias (Static): The alias name for the trust store of the server.

  • plugins.sercurity.ssl.transport.client.truststore_alias (Static): The alias name for the trust store of the client.

  • plugins.security.ssl.client.external_context_id (Static): Provides the transport client an ID to use for an external SSL context.

  • plugins.secuirty.ssl.transport.principal_extractor_class (Static): Specifies a class implementing an extractor so a custom part of the certificate is used as the principal.

  • plugins.security.ssl.http.crl.file_path (Static): A file path to a certificate revocation list file.

  • plugins.security.ssl.http.crl.validate (Static): Enables certificate revocation list (CRL) validation. Default is false (disabled).

  • plugins.security.ssl.http.crl.prefer_crlfile_over_ocsp (Static): Whether to prefer the CRL certificate entry over the Online Certificate Status Protocol (OCSP) entry if the certificate contains both. Optional. Default is false.

  • plugins.security.ssl.http.crl.check_only_end_entitites (Static): When true, only leaf certificates are validated. Default is true.

  • plugins.security.ssl.http.crl.disable_ocsp (Static): Disables OCSP. Default is false (OCSP is enabled).

  • plugins.security.ssl.http.crl.disable_crldp (Static): Disables CRL endpoints in certificates. Default is false (CRL endpoints are enabled).

  • plugins.security.ssl.allow_client_initiated_renegotiation (Static): Enables or disables client renegotiation. Default is false (client initiated renegotiation is not allowed).

Security plugin settings examples

  1. # Common configuration settings
  2. plugins.security.nodes_dn:
  3.   - "CN=*.example.com, OU=SSL, O=Test, L=Test, C=DE"
  4.   - "CN=node.other.com, OU=SSL, O=Test, L=Test, C=DE"
  5. plugins.security.authcz.admin_dn:
  6.   - CN=kirk,OU=client,O=client,L=test, C=de
  7. plugins.security.roles_mapping_resolution: MAPPING_ONLY
  8. plugins.security.ssl.transport.pemcert_filepath: esnode.pem
  9. plugins.security.ssl.transport.pemkey_filepath: esnode-key.pem
  10. plugins.security.ssl.transport.pemtrustedcas_filepath: root-ca.pem
  11. plugins.security.ssl.transport.enforce_hostname_verification: false
  12. plugins.security.ssl.http.enabled: true
  13. plugins.security.ssl.http.pemcert_filepath: esnode.pem
  14. plugins.security.ssl.http.pemkey_filepath: esnode-key.pem
  15. plugins.security.ssl.http.pemtrustedcas_filepath: root-ca.pem
  16. plugins.security.allow_unsafe_democertificates: true
  17. plugins.security.allow_default_init_securityindex: true
  18. plugins.security.nodes_dn_dynamic_config_enabled: false
  19. plugins.security.cert.intercluster_request_evaluator_class: # need example value for this.
  20. plugins.security.audit.type: internal_opensearch
  21. plugins.security.enable_snapshot_restore_privilege: true
  22. plugins.security.check_snapshot_restore_write_privileges: true
  23. plugins.security.cache.ttl_minutes: 60
  24. plugins.security.restapi.roles_enabled: ["all_access", "security_rest_api_access"]
  25. plugins.security.system_indices.enabled: true
  26. plugins.security.system_indices.indices: [".opendistro-alerting-config", ".opendistro-alerting-alert*", ".opendistro-anomaly-results*", ".opendistro-anomaly-detector*", ".opendistro-anomaly-checkpoints", ".opendistro-anomaly-detection-state", ".opendistro-reports-*", ".opendistro-notifications-*", ".opendistro-notebooks", ".opendistro-asynchronous-search-response*"]
  27. node.max_local_storage_nodes: 3
  28. plugins.security.restapi.password_validation_regex: '(?=.*[A-Z])(?=.*[^a-zA-Z\d])(?=.*[0-9])(?=.*[a-z]).{8,}'
  29. plugins.security.restapi.password_validation_error_message: "Password must be minimum 8 characters long and must contain at least one uppercase letter, one lowercase letter, one digit, and one special character."
  30. plugins.security.allow_default_init_securityindex: true
  31. plugins.security.cache.ttl_minutes: 60
  32. #
  33. # REST Management API configuration settings
  34. plugins.security.restapi.roles_enabled: ["all_access","xyz_role"]
  35. plugins.security.restapi.endpoints_disabled.all_access.ACTIONGROUPS: ["PUT","POST","DELETE"] # Alternative example: plugins.security.restapi.endpoints_disabled.xyz_role.LICENSE: ["DELETE"] #
  36. # Audit log configuration settings
  37. plugins.security.audit.enable_rest: true
  38. plugins.security.audit.enable_transport: false
  39. plugins.security.audit.resolve_bulk_requests: false
  40. plugins.security.audit.config.disabled_categories: ["AUTHENTICATED","GRANTED_PRIVILEGES"]
  41. plugins.security.audit.ignore_requests: ["indices:data/read/*","*_bulk"]
  42. plugins.security.audit.threadpool.size: 10
  43. plugins.security.audit.threadpool.max_queue_len: 100000
  44. plugins.security.audit.ignore_users: ['kibanaserver','some*user','/also.*regex possible/']
  45. plugins.security.audit.type: internal_opensearch
  46. #
  47. # external_opensearch settings
  48. plugins.security.audit.config.http_endpoints: ['localhost:9200','localhost:9201','localhost:9202']
  49. plugins.security.audit.config.index: "'auditlog6-'2023.06.15"
  50. plugins.security.audit.config.type: auditlog
  51. plugins.security.audit.config.username: auditloguser
  52. plugins.security.audit.config.password: auditlogpassword
  53. plugins.security.audit.config.enable_ssl: false
  54. plugins.security.audit.config.verify_hostnames: false
  55. plugins.security.audit.config.enable_ssl_client_auth: false
  56. plugins.security.audit.config.cert_alias: mycert
  57. plugins.security.audit.config.pemkey_filepath: key.pem
  58. plugins.security.audit.config.pemkey_content: <...pem base 64 content>
  59. plugins.security.audit.config.pemkey_password: secret
  60. plugins.security.audit.config.pemcert_filepath: cert.pem
  61. plugins.security.audit.config.pemcert_content: <...pem base 64 content>
  62. plugins.security.audit.config.pemtrustedcas_filepath: ca.pem
  63. plugins.security.audit.config.pemtrustedcas_content: <...pem base 64 content>
  64. #
  65. # Webhook settings
  66. plugins.security.audit.config.webhook.url: "http://mywebhook/endpoint"
  67. plugins.security.audit.config.webhook.format: JSON
  68. plugins.security.audit.config.webhook.ssl.verify: false
  69. plugins.security.audit.config.webhook.ssl.pemtrustedcas_filepath: ca.pem
  70. plugins.security.audit.config.webhook.ssl.pemtrustedcas_content: <...pem base 64 content>
  71. #
  72. # log4j settings
  73. plugins.security.audit.config.log4j.logger_name: auditlogger
  74. plugins.security.audit.config.log4j.level: INFO
  75. #
  76. # Advanced configuration settings
  77. plugins.security.authcz.impersonation_dn:
  78.   "CN=spock,OU=client,O=client,L=Test,C=DE":
  79.     - worf
  80.   "cn=webuser,ou=IT,ou=IT,dc=company,dc=com":
  81.     - user2
  82.     - user1
  83. plugins.security.authcz.rest_impersonation_user:
  84.   "picard":
  85.     - worf
  86.   "john":
  87.     - steve
  88.     - martin
  89. plugins.security.allow_default_init_securityindex: false
  90. plugins.security.allow_unsafe_democertificates: false
  91. plugins.security.cache.ttl_minutes: 60
  92. plugins.security.restapi.password_validation_regex: '(?=.*[A-Z])(?=.*[^a-zA-Z\d])(?=.*[0-9])(?=.*[a-z]).{8,}'
  93. plugins.security.restapi.password_validation_error_message: "A password must be at least 8 characters long and contain at least one uppercase letter, one lowercase letter, one digit, and one special character."
  94. plugins.security.restapi.password_min_length: 8
  95. plugins.security.restapi.password_score_based_validation_strength: very_strong
  96. #
  97. # Advanced SSL settings - use only if you understand SSL ins and outs
  98. plugins.security.ssl.transport.client.pemkey_password: superSecurePassword1
  99. plugins.security.ssl.transport.keystore_keypassword: superSecurePassword2
  100. plugins.security.ssl.transport.server.keystore_keypassword: superSecurePassword3
  101. plugins.security.ssl.http.keystore_keypassword: superSecurePassword4
  102. plugins.security.ssl.http.clientauth_mode: REQUIRE
  103. plugins.security.ssl.transport.enabled: true
  104. plugins.security.ssl.transport.server.keystore_alias: my_alias
  105. plugins.security.ssl.transport.client.keystore_alias: my_other_alias
  106. plugins.security.ssl.transport.server.truststore_alias: trustore_alias_1
  107. plugins.security.ssl.transport.client.truststore_alias: trustore_alias_2
  108. plugins.security.ssl.client.external_context_id: my_context_id
  109. plugins.security.ssl.transport.principal_extractor_class: org.opensearch.security.ssl.ExampleExtractor
  110. plugins.security.ssl.http.crl.file_path: ssl/crl/revoked.crl
  111. plugins.security.ssl.http.crl.validate: true
  112. plugins.security.ssl.http.crl.prefer_crlfile_over_ocsp: true
  113. plugins.security.ssl.http.crl.check_only_end_entitites: false
  114. plugins.security.ssl.http.crl.disable_ocsp: true
  115. plugins.security.ssl.http.crl.disable_crldp: true
  116. plugins.security.ssl.allow_client_initiated_renegotiation: true
  117. #
  118. # Expert settings - use only if you understand their use completely: accidental values can potentially cause security risks or failures to OpenSearch Security.
  119. plugins.security.config_index_name: .opendistro_security
  120. plugins.security.cert.oid: '1.2.3.4.5.5'
  121. plugins.security.cert.intercluster_request_evaluator_class: org.opensearch.security.transport.DefaultInterClusterRequestEvaluator
  122. plugins.security.enable_snapshot_restore_privilege: true
  123. plugins.security.check_snapshot_restore_write_privileges: true
  124. plugins.security.cache.ttl_minutes: 60
  125. plugins.security.disabled: false
  126. plugins.security.protected_indices.enabled: true
  127. plugins.security.protected_indices.roles: ['all_access']
  128. plugins.security.protected_indices.indices: []
  129. plugins.security.system_indices.enabled: true
  130. plugins.security.system_indices.indices: ['.opendistro-alerting-config', '.opendistro-ism-*', '.opendistro-reports-*', '.opensearch-notifications-*', '.opensearch-notebooks', '.opensearch-observability', '.opendistro-asynchronous-search-response*', '.replication-metadata-store']

copy