Post-installation cluster tasks

After installing OKD, you can further expand and customize your cluster to your requirements.

Available cluster customizations

You complete most of the cluster configuration and customization after you deploy your OKD cluster. A number of configuration resources are available.

You modify the configuration resources to configure the major features of the cluster, such as the image registry, networking configuration, image build behavior, and the identity provider.

For current documentation of the settings that you control by using these resources, use the oc explain command, for example oc explain builds --api-version=config.openshift.io/v1

Cluster configuration resources

All cluster configuration resources are globally scoped (not namespaced) and named cluster.

Operator configuration resources

These configuration resources are cluster-scoped instances, named cluster, which control the behavior of a specific component as owned by a particular Operator.

Additional configuration resources

These configuration resources represent a single instance of a particular component. In some cases, you can request multiple instances by creating multiple instances of the resource. In other cases, the Operator can use only a specific resource instance name in a specific namespace. Reference the component-specific documentation for details on how and when you can create additional resource instances.

Informational Resources

You use these resources to retrieve information about the cluster. Some configurations might require you to edit these resources directly.

Updating the global cluster pull secret

You can update the global pull secret for your cluster by either replacing the current pull secret or appending a new pull secret.

The procedure is required when users use a separate registry to store images than the registry used during installation.

Prerequisites

• You have access to the cluster as a user with the cluster-admin role.

Procedure

1. Optional: To append a new pull secret to the existing pull secret, complete the following steps:

   1. Enter the following command to download the pull secret:

      $ oc get secret/pull-secret -n openshift-config --template='{{index .data ".dockerconfigjson" | base64decode}}' ><pull_secret_location> (1)

      1	Provide the path to the pull secret file.

   2. Enter the following command to add the new pull secret:

      $ oc registry login --registry="<registry>" \ (1)
      --auth-basic="<username>:<password>" \ (2)
      --to=<pull_secret_location> (3)

      1	Provide the new registry. You can include multiple repositories within the same registry, for example: —registry=”<registry/my-namespace/my-repository>”.
      2	Provide the credentials of the new registry.
      3	Provide the path to the pull secret file.

      Alternatively, you can perform a manual update to the pull secret file.

2. Enter the following command to update the global pull secret for your cluster:

   $ oc set data secret/pull-secret -n openshift-config --from-file=.dockerconfigjson=<pull_secret_location> (1)

   1	Provide the path to the new pull secret file.

   This update is rolled out to all nodes, which can take some time depending on the size of your cluster.

   As of OKD 4.7.4, changes to the global pull secret no longer trigger a node drain or reboot.

Adjust worker nodes

If you incorrectly sized the worker nodes during deployment, adjust them by creating one or more new machine sets, scale them up, then scale the original machine set down before removing them.

Understanding the difference between machine sets and the machine config pool

MachineSet objects describe OKD nodes with respect to the cloud or machine provider.

The MachineConfigPool object allows MachineConfigController components to define and provide the status of machines in the context of upgrades.

The MachineConfigPool object allows users to configure how upgrades are rolled out to the OKD nodes in the machine config pool.

The NodeSelector object can be replaced with a reference to the MachineSet object.

Scaling a machine set manually

To add or remove an instance of a machine in a machine set, you can manually scale the machine set.

This guidance is relevant to fully automated, installer-provisioned infrastructure installations. Customized, user-provisioned infrastructure installations do not have machine sets.

Prerequisites

• Install an OKD cluster and the oc command line.

• Log in to oc as a user with cluster-admin permission.

Procedure

1. View the machine sets that are in the cluster:

   $ oc get machinesets -n openshift-machine-api

   The machine sets are listed in the form of <clusterid>-worker-<aws-region-az>.

2. View the machines that are in the cluster:

   $ oc get machine -n openshift-machine-api

3. Set the annotation on the machine that you want to delete:

   $ oc annotate machine/<machine_name> -n openshift-machine-api machine.openshift.io/cluster-api-delete-machine="true"

4. Cordon and drain the node that you want to delete:

   $ oc adm cordon <node_name>
   $ oc adm drain <node_name>

5. Scale the machine set:

   $ oc scale --replicas=2 machineset <machineset> -n openshift-machine-api

   Or:

   $ oc edit machineset <machineset> -n openshift-machine-api

   You can alternatively apply the following YAML to scale the machine set: apiVersion: machine.openshift.io/v1beta1 kind: MachineSet metadata: name: <machineset> namespace: openshift-machine-api spec: replicas: 2

   You can scale the machine set up or down. It takes several minutes for the new machines to be available.

Verification

• Verify the deletion of the intended machine:

  $ oc get machines

The machine set deletion policy

Random, Newest, and Oldest are the three supported deletion options. The default is Random, meaning that random machines are chosen and deleted when scaling machine sets down. The deletion policy can be set according to the use case by modifying the particular machine set:

spec:
  deletePolicy: <delete_policy>
  replicas: <desired_replica_count>

Specific machines can also be prioritized for deletion by adding the annotation machine.openshift.io/cluster-api-delete-machine to the machine of interest, regardless of the deletion policy.

Creating default cluster-wide node selectors

You can use default cluster-wide node selectors on pods together with labels on nodes to constrain all pods created in a cluster to specific nodes.

With cluster-wide node selectors, when you create a pod in that cluster, OKD adds the default node selectors to the pod and schedules the pod on nodes with matching labels.

You configure cluster-wide node selectors by editing the Scheduler Operator custom resource (CR). You add labels to a node, a machine set, or a machine config. Adding the label to the machine set ensures that if the node or machine goes down, new nodes have the label. Labels added to a node or machine config do not persist if the node or machine goes down.

Procedure

To add a default cluster-wide node selector:

1. Edit the Scheduler Operator CR to add the default cluster-wide node selectors:

   $ oc edit scheduler cluster

   Example Scheduler Operator CR with a node selector

   apiVersion: config.openshift.io/v1
   kind: Scheduler
   metadata:
     name: cluster
   ...
   spec:
     defaultNodeSelector: type=user-node,region=east (1)
     mastersSchedulable: false

   1	Add a node selector with the appropriate <key>:<value> pairs.

   After making this change, wait for the pods in the openshift-kube-apiserver project to redeploy. This can take several minutes. The default cluster-wide node selector does not take effect until the pods redeploy.

2. Add labels to a node by using a machine set or editing the node directly:

   • Use a machine set to add labels to nodes managed by the machine set when a node is created:

     1. Run the following command to add labels to a MachineSet object:

        $ oc patch MachineSet <name> --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"<key>"="<value>","<key>"="<value>"}}]'  -n openshift-machine-api (1)

        1	Add a <key>/<value> pair for each label.

        For example:

        $ oc patch MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"type":"user-node","region":"east"}}]'  -n openshift-machine-api

        You can alternatively apply the following YAML to add labels to a machine set: apiVersion: machine.openshift.io/v1beta1 kind: MachineSet metadata: name: <machineset> namespace: openshift-machine-api spec: template: spec: metadata: labels: region: “east” type: “user-node”

     2. Verify that the labels are added to the MachineSet object by using the oc edit command:

        For example:

        $ oc edit MachineSet abc612-msrtw-worker-us-east-1c -n openshift-machine-api

        Example MachineSet object

        apiVersion: machine.openshift.io/v1beta1
        kind: MachineSet
          ...
        spec:
          ...
          template:
            metadata:
          ...
            spec:
              metadata:
                labels:
                  region: east
                  type: user-node
          ...

     3. Redeploy the nodes associated with that machine set by scaling down to 0 and scaling up the nodes:

        For example:

        $ oc scale --replicas=0 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

        $ oc scale --replicas=1 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

     4. Verify that the labels are added to the MachineSet object by using the oc edit command:

        For example:

        $ oc edit MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

     5. Redeploy the nodes associated with that machine set by scaling down to 0 and scaling up the nodes:

        For example:

        $ oc scale --replicas=0 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

        $ oc scale --replicas=1 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

     6. When the nodes are ready and available, verify that the label is added to the nodes by using the oc get command:

        $ oc get nodes -l <key>=<value>

        For example:

        $ oc get nodes -l type=user-node

        Example output

        NAME                                       STATUS   ROLES    AGE   VERSION
        ci-ln-l8nry52-f76d1-hl7m7-worker-c-vmqzp   Ready    worker   61s   v1.23.0

   • Add labels directly to a node:

     1. Edit the Node object for the node:

        $ oc label nodes <name> <key>=<value>

        For example, to label a node:

        $ oc label nodes ci-ln-l8nry52-f76d1-hl7m7-worker-b-tgq49 type=user-node region=east

        You can alternatively apply the following YAML to add labels to a node: kind: Node apiVersion: v1 metadata: name: <node_name> labels: type: “user-node” region: “east”

     2. Verify that the labels are added to the node using the oc get command:

        $ oc get nodes -l <key>=<value>,<key>=<value>

        For example:

        $ oc get nodes -l type=user-node,region=east

        Example output

        NAME                                       STATUS   ROLES    AGE   VERSION
        ci-ln-l8nry52-f76d1-hl7m7-worker-b-tgq49   Ready    worker   17m   v1.23.0

Creating infrastructure machine sets for production environments

You can create a machine set to create machines that host only infrastructure components, such as the default router, the integrated container image registry, and components for cluster metrics and monitoring. These infrastructure machines are not counted toward the total number of subscriptions that are required to run the environment.

In a production deployment, it is recommended that you deploy at least three machine sets to hold infrastructure components. Both OpenShift Logging and Red Hat OpenShift Service Mesh deploy Elasticsearch, which requires three instances to be installed on different nodes. Each of these nodes can be deployed to different availability zones for high availability. A configuration like this requires three different machine sets, one for each availability zone. In global Azure regions that do not have multiple availability zones, you can use availability sets to ensure high availability.

For information on infrastructure nodes and which components can run on infrastructure nodes, see Creating infrastructure machine sets.

For sample machine sets that you can use with these procedures, see Creating machine sets for different clouds.

Creating a machine set

In addition to the ones created by the installation program, you can create your own machine sets to dynamically manage the machine compute resources for specific workloads of your choice.

Prerequisites

• Deploy an OKD cluster.

• Install the OpenShift CLI (oc).

• Log in to oc as a user with cluster-admin permission.

Procedure

1. Create a new YAML file that contains the machine set custom resource (CR) sample and is named <file_name>.yaml.

   Ensure that you set the <clusterID> and <role> parameter values.

   1. If you are not sure which value to set for a specific field, you can check an existing machine set from your cluster:

      $ oc get machinesets -n openshift-machine-api

      Example output

      NAME                                DESIRED   CURRENT   READY   AVAILABLE   AGE
      agl030519-vplxk-worker-us-east-1a   1         1         1       1           55m
      agl030519-vplxk-worker-us-east-1b   1         1         1       1           55m
      agl030519-vplxk-worker-us-east-1c   1         1         1       1           55m
      agl030519-vplxk-worker-us-east-1d   0         0                             55m
      agl030519-vplxk-worker-us-east-1e   0         0                             55m
      agl030519-vplxk-worker-us-east-1f   0         0                             55m

   2. Check values of a specific machine set:

      $ oc get machineset <machineset_name> -n \
           openshift-machine-api -o yaml

      Example output

      ...
      template:
          metadata:
            labels:
              machine.openshift.io/cluster-api-cluster: agl030519-vplxk (1)
              machine.openshift.io/cluster-api-machine-role: worker (2)
              machine.openshift.io/cluster-api-machine-type: worker
              machine.openshift.io/cluster-api-machineset: agl030519-vplxk-worker-us-east-1a

      1	The cluster ID.
      2	A default node label.

2. Create the new MachineSet CR:

   $ oc create -f <file_name>.yaml

3. View the list of machine sets:

   $ oc get machineset -n openshift-machine-api

   Example output

   NAME                                DESIRED   CURRENT   READY   AVAILABLE   AGE
   agl030519-vplxk-infra-us-east-1a    1         1         1       1           11m
   agl030519-vplxk-worker-us-east-1a   1         1         1       1           55m
   agl030519-vplxk-worker-us-east-1b   1         1         1       1           55m
   agl030519-vplxk-worker-us-east-1c   1         1         1       1           55m
   agl030519-vplxk-worker-us-east-1d   0         0                             55m
   agl030519-vplxk-worker-us-east-1e   0         0                             55m
   agl030519-vplxk-worker-us-east-1f   0         0                             55m

   When the new machine set is available, the DESIRED and CURRENT values match. If the machine set is not available, wait a few minutes and run the command again.

Creating an infrastructure node

Requirements of the cluster dictate that infrastructure, also called infra nodes, be provisioned. The installer only provides provisions for control plane and worker nodes. Worker nodes can be designated as infrastructure nodes or application, also called app, nodes through labeling.

Procedure

1. Add a label to the worker node that you want to act as application node:

   $ oc label node <node-name> node-role.kubernetes.io/app=""

2. Add a label to the worker nodes that you want to act as infrastructure nodes:

   $ oc label node <node-name> node-role.kubernetes.io/infra=""

3. Check to see if applicable nodes now have the infra role and app roles:

   $ oc get nodes

4. Create a default cluster-wide node selector. The default node selector is applied to pods created in all namespaces. This creates an intersection with any existing node selectors on a pod, which additionally constrains the pod’s selector.

   If the default node selector key conflicts with the key of a pod’s label, then the default node selector is not applied. However, do not set a default node selector that might cause a pod to become unschedulable. For example, setting the default node selector to a specific node role, such as node-role.kubernetes.io/infra=””, when a pod’s label is set to a different node role, such as node-role.kubernetes.io/master=””, can cause the pod to become unschedulable. For this reason, use caution when setting the default node selector to specific node roles. You can alternatively use a project node selector to avoid cluster-wide node selector key conflicts.

   1. Edit the Scheduler object:

      $ oc edit scheduler cluster

   2. Add the defaultNodeSelector field with the appropriate node selector:

      apiVersion: config.openshift.io/v1
      kind: Scheduler
      metadata:
        name: cluster
      ...
      spec:
        defaultNodeSelector: topology.kubernetes.io/region=us-east-1 (1)
      ...

      1	This example node selector deploys pods on nodes in the us-east-1 region by default.

   3. Save the file to apply the changes.

You can now move infrastructure resources to the newly labeled infra nodes.

Additional resources

• For information on how to configure project node selectors to avoid cluster-wide node selector key conflicts, see Project node selectors.

Creating a machine config pool for infrastructure machines

If you need infrastructure machines to have dedicated configurations, you must create an infra pool.

Procedure

1. Add a label to the node you want to assign as the infra node with a specific label:

   $ oc label node <node_name> <label>

   $ oc label node ci-ln-n8mqwr2-f76d1-xscn2-worker-c-6fmtx node-role.kubernetes.io/infra=

2. Create a machine config pool that contains both the worker role and your custom role as machine config selector:

   $ cat infra.mcp.yaml

   Example output

   apiVersion: machineconfiguration.openshift.io/v1
   kind: MachineConfigPool
   metadata:
     name: infra
   spec:
     machineConfigSelector:
       matchExpressions:
         - {key: machineconfiguration.openshift.io/role, operator: In, values: [worker,infra]} (1)
     nodeSelector:
       matchLabels:
         node-role.kubernetes.io/infra: "" (2)

   1	Add the worker role and your custom role.
   2	Add the label you added to the node as a nodeSelector.

   Custom machine config pools inherit machine configs from the worker pool. Custom pools use any machine config targeted for the worker pool, but add the ability to also deploy changes that are targeted at only the custom pool. Because a custom pool inherits resources from the worker pool, any change to the worker pool also affects the custom pool.

3. After you have the YAML file, you can create the machine config pool:

   $ oc create -f infra.mcp.yaml

4. Check the machine configs to ensure that the infrastructure configuration rendered successfully:

   $ oc get machineconfig

   Example output

   NAME                                                        GENERATEDBYCONTROLLER                      IGNITIONVERSION   CREATED
   00-master                                                   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   00-worker                                                   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   01-master-container-runtime                                 365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   01-master-kubelet                                           365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   01-worker-container-runtime                                 365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   01-worker-kubelet                                           365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   99-master-1ae2a1e0-a115-11e9-8f14-005056899d54-registries   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   99-master-ssh                                                                                          3.2.0             31d
   99-worker-1ae64748-a115-11e9-8f14-005056899d54-registries   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             31d
   99-worker-ssh                                                                                          3.2.0             31d
   rendered-infra-4e48906dca84ee702959c71a53ee80e7             365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             23m
   rendered-master-072d4b2da7f88162636902b074e9e28e            5b6fb8349a29735e48446d435962dec4547d3090   3.2.0             31d
   rendered-master-3e88ec72aed3886dec061df60d16d1af            02c07496ba0417b3e12b78fb32baf6293d314f79   3.2.0             31d
   rendered-master-419bee7de96134963a15fdf9dd473b25            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             17d
   rendered-master-53f5c91c7661708adce18739cc0f40fb            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             13d
   rendered-master-a6a357ec18e5bce7f5ac426fc7c5ffcd            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             7d3h
   rendered-master-dc7f874ec77fc4b969674204332da037            5b6fb8349a29735e48446d435962dec4547d3090   3.2.0             31d
   rendered-worker-1a75960c52ad18ff5dfa6674eb7e533d            5b6fb8349a29735e48446d435962dec4547d3090   3.2.0             31d
   rendered-worker-2640531be11ba43c61d72e82dc634ce6            5b6fb8349a29735e48446d435962dec4547d3090   3.2.0             31d
   rendered-worker-4e48906dca84ee702959c71a53ee80e7            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             7d3h
   rendered-worker-4f110718fe88e5f349987854a1147755            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             17d
   rendered-worker-afc758e194d6188677eb837842d3b379            02c07496ba0417b3e12b78fb32baf6293d314f79   3.2.0             31d
   rendered-worker-daa08cc1e8f5fcdeba24de60cd955cc3            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   3.2.0             13d

   You should see a new machine config, with the rendered-infra-* prefix.

5. Optional: To deploy changes to a custom pool, create a machine config that uses the custom pool name as the label, such as infra. Note that this is not required and only shown for instructional purposes. In this manner, you can apply any custom configurations specific to only your infra nodes.

   After you create the new machine config pool, the MCO generates a new rendered config for that pool, and associated nodes of that pool reboot to apply the new configuration.

   1. Create a machine config:

      $ cat infra.mc.yaml

      Example output

      apiVersion: machineconfiguration.openshift.io/v1
      kind: MachineConfig
      metadata:
        name: 51-infra
        labels:
          machineconfiguration.openshift.io/role: infra (1)
      spec:
        config:
          ignition:
            version: 3.2.0
          storage:
            files:
            - path: /etc/infratest
              mode: 0644
              contents:
                source: data:,infra

      1	Add the label you added to the node as a nodeSelector.

   2. Apply the machine config to the infra-labeled nodes:

      $ oc create -f infra.mc.yaml

6. Confirm that your new machine config pool is available:

   $ oc get mcp

   Example output

   NAME     CONFIG                                             UPDATED   UPDATING   DEGRADED   MACHINECOUNT   READYMACHINECOUNT   UPDATEDMACHINECOUNT   DEGRADEDMACHINECOUNT   AGE
   infra    rendered-infra-60e35c2e99f42d976e084fa94da4d0fc    True      False      False      1              1                   1                     0                      4m20s
   master   rendered-master-9360fdb895d4c131c7c4bebbae099c90   True      False      False      3              3                   3                     0                      91m
   worker   rendered-worker-60e35c2e99f42d976e084fa94da4d0fc   True      False      False      2              2                   2                     0                      91m

   In this example, a worker node was changed to an infra node.

Additional resources

• See Node configuration management with machine config pools for more information on grouping infra machines in a custom pool.

Assigning machine set resources to infrastructure nodes

After creating an infrastructure machine set, the worker and infra roles are applied to new infra nodes. Nodes with the infra role are not counted toward the total number of subscriptions that are required to run the environment, even when the worker role is also applied.

However, when an infra node is assigned the worker role, there is a chance that user workloads can get assigned inadvertently to the infra node. To avoid this, you can apply a taint to the infra node and tolerations for the pods that you want to control.

Binding infrastructure node workloads using taints and tolerations

If you have an infra node that has the infra and worker roles assigned, you must configure the node so that user workloads are not assigned to it.

Prerequisites

• Configure additional MachineSet objects in your OKD cluster.

Procedure

1. Add a taint to the infra node to prevent scheduling user workloads on it:

   1. Determine if the node has the taint:

      $ oc describe nodes <node_name>

      Sample output

      oc describe node ci-ln-iyhx092-f76d1-nvdfm-worker-b-wln2l
      Name:               ci-ln-iyhx092-f76d1-nvdfm-worker-b-wln2l
      Roles:              worker
       ...
      Taints:             node-role.kubernetes.io/infra:NoSchedule
       ...

      This example shows that the node has a taint. You can proceed with adding a toleration to your pod in the next step.

   2. If you have not configured a taint to prevent scheduling user workloads on it:

      $ oc adm taint nodes <node_name> <key>:<effect>

      For example:

      $ oc adm taint nodes node1 node-role.kubernetes.io/infra:NoSchedule

      You can alternatively apply the following YAML to add the taint: kind: Node apiVersion: v1 metadata: name: <node_name> labels: … spec: taints: - key: node-role.kubernetes.io/infra effect: NoSchedule …

      This example places a taint on node1 that has key node-role.kubernetes.io/infra and taint effect NoSchedule. Nodes with the NoSchedule effect schedule only pods that tolerate the taint, but allow existing pods to remain scheduled on the node.

      If a descheduler is used, pods violating node taints could be evicted from the cluster.

2. Add tolerations for the pod configurations you want to schedule on the infra node, like router, registry, and monitoring workloads. Add the following code to the Pod object specification:

   tolerations:
     - effect: NoSchedule (1)
       key: node-role.kubernetes.io/infra (2)
       operator: Exists (3)

   1	Specify the effect that you added to the node.
   2	Specify the key that you added to the node.
   3	Specify the Exists Operator to require a taint with the key node-role.kubernetes.io/infra to be present on the node.

   This toleration matches the taint created by the oc adm taint command. A pod with this toleration can be scheduled onto the infra node.

   Moving pods for an Operator installed via OLM to an infra node is not always possible. The capability to move Operator pods depends on the configuration of each Operator.

3. Schedule the pod to the infra node using a scheduler. See the documentation for Controlling pod placement onto nodes for details.

Additional resources

• See Controlling pod placement using the scheduler for general information on scheduling a pod to a node.

Moving resources to infrastructure machine sets

Some of the infrastructure resources are deployed in your cluster by default. You can move them to the infrastructure machine sets that you created.

Moving the router

You can deploy the router pod to a different machine set. By default, the pod is deployed to a worker node.

Prerequisites

• Configure additional machine sets in your OKD cluster.

Procedure

1. View the IngressController custom resource for the router Operator:

   $ oc get ingresscontroller default -n openshift-ingress-operator -o yaml

   The command output resembles the following text:

   apiVersion: operator.openshift.io/v1
   kind: IngressController
   metadata:
     creationTimestamp: 2019-04-18T12:35:39Z
     finalizers:
     - ingresscontroller.operator.openshift.io/finalizer-ingresscontroller
     generation: 1
     name: default
     namespace: openshift-ingress-operator
     resourceVersion: "11341"
     selfLink: /apis/operator.openshift.io/v1/namespaces/openshift-ingress-operator/ingresscontrollers/default
     uid: 79509e05-61d6-11e9-bc55-02ce4781844a
   spec: {}
   status:
     availableReplicas: 2
     conditions:
     - lastTransitionTime: 2019-04-18T12:36:15Z
       status: "True"
       type: Available
     domain: apps.<cluster>.example.com
     endpointPublishingStrategy:
       type: LoadBalancerService
     selector: ingresscontroller.operator.openshift.io/deployment-ingresscontroller=default

2. Edit the ingresscontroller resource and change the nodeSelector to use the infra label:

   $ oc edit ingresscontroller default -n openshift-ingress-operator

   Add the nodeSelector stanza that references the infra label to the spec section, as shown:

     spec:
       nodePlacement:
         nodeSelector:
           matchLabels:
             node-role.kubernetes.io/infra: ""

3. Confirm that the router pod is running on the infra node.

   1. View the list of router pods and note the node name of the running pod:

      $ oc get pod -n openshift-ingress -o wide

      Example output

      NAME                              READY     STATUS        RESTARTS   AGE       IP           NODE                           NOMINATED NODE   READINESS GATES
      router-default-86798b4b5d-bdlvd   1/1      Running       0          28s       10.130.2.4   ip-10-0-217-226.ec2.internal   <none>           <none>
      router-default-955d875f4-255g8    0/1      Terminating   0          19h       10.129.2.4   ip-10-0-148-172.ec2.internal   <none>           <none>

      In this example, the running pod is on the ip-10-0-217-226.ec2.internal node.

   2. View the node status of the running pod:

      $ oc get node <node_name> (1)

      1	Specify the <node_name> that you obtained from the pod list.

      Example output

      NAME                          STATUS  ROLES         AGE   VERSION
      ip-10-0-217-226.ec2.internal  Ready   infra,worker  17h   v1.23.0

      Because the role list includes infra, the pod is running on the correct node.

Moving the default registry

You configure the registry Operator to deploy its pods to different nodes.

Prerequisites

• Configure additional machine sets in your OKD cluster.

Procedure

1. View the config/instance object:

   $ oc get configs.imageregistry.operator.openshift.io/cluster -o yaml

   Example output

   apiVersion: imageregistry.operator.openshift.io/v1
   kind: Config
   metadata:
     creationTimestamp: 2019-02-05T13:52:05Z
     finalizers:
     - imageregistry.operator.openshift.io/finalizer
     generation: 1
     name: cluster
     resourceVersion: "56174"
     selfLink: /apis/imageregistry.operator.openshift.io/v1/configs/cluster
     uid: 36fd3724-294d-11e9-a524-12ffeee2931b
   spec:
     httpSecret: d9a012ccd117b1e6616ceccb2c3bb66a5fed1b5e481623
     logging: 2
     managementState: Managed
     proxy: {}
     replicas: 1
     requests:
       read: {}
       write: {}
     storage:
       s3:
         bucket: image-registry-us-east-1-c92e88cad85b48ec8b312344dff03c82-392c
         region: us-east-1
   status:
   ...

2. Edit the config/instance object:

   $ oc edit configs.imageregistry.operator.openshift.io/cluster

3. Modify the spec section of the object to resemble the following YAML:

   spec:
     affinity:
       podAntiAffinity:
         preferredDuringSchedulingIgnoredDuringExecution:
         - podAffinityTerm:
             namespaces:
             - openshift-image-registry
             topologyKey: kubernetes.io/hostname
           weight: 100
     logLevel: Normal
     managementState: Managed
     nodeSelector:
       node-role.kubernetes.io/infra: ""

4. Verify the registry pod has been moved to the infrastructure node.

   1. Run the following command to identify the node where the registry pod is located:

      $ oc get pods -o wide -n openshift-image-registry

   2. Confirm the node has the label you specified:

      $ oc describe node <node_name>

      Review the command output and confirm that node-role.kubernetes.io/infra is in the LABELS list.

Moving the monitoring solution

By default, the Prometheus Cluster Monitoring stack, which contains Prometheus, Grafana, and AlertManager, is deployed to provide cluster monitoring. It is managed by the Cluster Monitoring Operator. To move its components to different machines, you create and apply a custom config map.

Procedure

1. Save the following ConfigMap definition as the cluster-monitoring-configmap.yaml file:

   apiVersion: v1
   kind: ConfigMap
   metadata:
     name: cluster-monitoring-config
     namespace: openshift-monitoring
   data:
     config.yaml: |+
       alertmanagerMain:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       prometheusK8s:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       prometheusOperator:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       grafana:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       k8sPrometheusAdapter:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       kubeStateMetrics:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       telemeterClient:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       openshiftStateMetrics:
         nodeSelector:
           node-role.kubernetes.io/infra: ""
       thanosQuerier:
         nodeSelector:
           node-role.kubernetes.io/infra: ""

   Running this config map forces the components of the monitoring stack to redeploy to infrastructure nodes.

2. Apply the new config map:

   $ oc create -f cluster-monitoring-configmap.yaml

3. Watch the monitoring pods move to the new machines:

   $ watch 'oc get pod -n openshift-monitoring -o wide'

4. If a component has not moved to the infra node, delete the pod with this component:

   $ oc delete pod -n openshift-monitoring <pod>

   The component from the deleted pod is re-created on the infra node.

Moving OpenShift Logging resources

You can configure the Cluster Logging Operator to deploy the pods for OpenShift Logging components, such as Elasticsearch and Kibana, to different nodes. You cannot move the Cluster Logging Operator pod from its installed location.

For example, you can move the Elasticsearch pods to a separate node because of high CPU, memory, and disk requirements.

Prerequisites

• OpenShift Logging and Elasticsearch must be installed. These features are not installed by default.

Procedure

1. Edit the ClusterLogging custom resource (CR) in the openshift-logging project:

   $ oc edit ClusterLogging instance

   apiVersion: logging.openshift.io/v1
   kind: ClusterLogging
   ...
   spec:
     collection:
       logs:
         fluentd:
           resources: null
         type: fluentd
     logStore:
       elasticsearch:
         nodeCount: 3
         nodeSelector: (1)
           node-role.kubernetes.io/infra: ''
         redundancyPolicy: SingleRedundancy
         resources:
           limits:
             cpu: 500m
             memory: 16Gi
           requests:
             cpu: 500m
             memory: 16Gi
         storage: {}
       type: elasticsearch
     managementState: Managed
     visualization:
       kibana:
         nodeSelector: (1)
           node-role.kubernetes.io/infra: ''
         proxy:
           resources: null
         replicas: 1
         resources: null
       type: kibana
   ...

Verification

To verify that a component has moved, you can use the oc get pod -o wide command.

For example:

• You want to move the Kibana pod from the ip-10-0-147-79.us-east-2.compute.internal node:

  $ oc get pod kibana-5b8bdf44f9-ccpq9 -o wide

  Example output

  NAME                      READY   STATUS    RESTARTS   AGE   IP            NODE                                        NOMINATED NODE   READINESS GATES
  kibana-5b8bdf44f9-ccpq9   2/2     Running   0          27s   10.129.2.18   ip-10-0-147-79.us-east-2.compute.internal   <none>           <none>

• You want to move the Kibana pod to the ip-10-0-139-48.us-east-2.compute.internal node, a dedicated infrastructure node:

  $ oc get nodes

  Example output

  NAME                                         STATUS   ROLES          AGE   VERSION
  ip-10-0-133-216.us-east-2.compute.internal   Ready    master         60m   v1.23.0
  ip-10-0-139-146.us-east-2.compute.internal   Ready    master         60m   v1.23.0
  ip-10-0-139-192.us-east-2.compute.internal   Ready    worker         51m   v1.23.0
  ip-10-0-139-241.us-east-2.compute.internal   Ready    worker         51m   v1.23.0
  ip-10-0-147-79.us-east-2.compute.internal    Ready    worker         51m   v1.23.0
  ip-10-0-152-241.us-east-2.compute.internal   Ready    master         60m   v1.23.0
  ip-10-0-139-48.us-east-2.compute.internal    Ready    infra          51m   v1.23.0

  Note that the node has a node-role.kubernetes.io/infra: '' label:

  $ oc get node ip-10-0-139-48.us-east-2.compute.internal -o yaml

  Example output

  kind: Node
  apiVersion: v1
  metadata:
    name: ip-10-0-139-48.us-east-2.compute.internal
    selfLink: /api/v1/nodes/ip-10-0-139-48.us-east-2.compute.internal
    uid: 62038aa9-661f-41d7-ba93-b5f1b6ef8751
    resourceVersion: '39083'
    creationTimestamp: '2020-04-13T19:07:55Z'
    labels:
      node-role.kubernetes.io/infra: ''
  ...

• To move the Kibana pod, edit the ClusterLogging CR to add a node selector:

  apiVersion: logging.openshift.io/v1
  kind: ClusterLogging
  ...
  spec:
  ...
    visualization:
      kibana:
        nodeSelector: (1)
          node-role.kubernetes.io/infra: ''
        proxy:
          resources: null
        replicas: 1
        resources: null
      type: kibana

  1	Add a node selector to match the label in the node specification.

• After you save the CR, the current Kibana pod is terminated and new pod is deployed:

  $ oc get pods

  Example output

  NAME                                            READY   STATUS        RESTARTS   AGE
  cluster-logging-operator-84d98649c4-zb9g7       1/1     Running       0          29m
  elasticsearch-cdm-hwv01pf7-1-56588f554f-kpmlg   2/2     Running       0          28m
  elasticsearch-cdm-hwv01pf7-2-84c877d75d-75wqj   2/2     Running       0          28m
  elasticsearch-cdm-hwv01pf7-3-f5d95b87b-4nx78    2/2     Running       0          28m
  fluentd-42dzz                                   1/1     Running       0          28m
  fluentd-d74rq                                   1/1     Running       0          28m
  fluentd-m5vr9                                   1/1     Running       0          28m
  fluentd-nkxl7                                   1/1     Running       0          28m
  fluentd-pdvqb                                   1/1     Running       0          28m
  fluentd-tflh6                                   1/1     Running       0          28m
  kibana-5b8bdf44f9-ccpq9                         2/2     Terminating   0          4m11s
  kibana-7d85dcffc8-bfpfp                         2/2     Running       0          33s

• The new pod is on the ip-10-0-139-48.us-east-2.compute.internal node:

  $ oc get pod kibana-7d85dcffc8-bfpfp -o wide

  Example output

  NAME                      READY   STATUS        RESTARTS   AGE   IP            NODE                                        NOMINATED NODE   READINESS GATES
  kibana-7d85dcffc8-bfpfp   2/2     Running       0          43s   10.131.0.22   ip-10-0-139-48.us-east-2.compute.internal   <none>           <none>

• After a few moments, the original Kibana pod is removed.

  $ oc get pods

  Example output

  NAME                                            READY   STATUS    RESTARTS   AGE
  cluster-logging-operator-84d98649c4-zb9g7       1/1     Running   0          30m
  elasticsearch-cdm-hwv01pf7-1-56588f554f-kpmlg   2/2     Running   0          29m
  elasticsearch-cdm-hwv01pf7-2-84c877d75d-75wqj   2/2     Running   0          29m
  elasticsearch-cdm-hwv01pf7-3-f5d95b87b-4nx78    2/2     Running   0          29m
  fluentd-42dzz                                   1/1     Running   0          29m
  fluentd-d74rq                                   1/1     Running   0          29m
  fluentd-m5vr9                                   1/1     Running   0          29m
  fluentd-nkxl7                                   1/1     Running   0          29m
  fluentd-pdvqb                                   1/1     Running   0          29m
  fluentd-tflh6                                   1/1     Running   0          29m
  kibana-7d85dcffc8-bfpfp                         2/2     Running   0          62s

About the cluster autoscaler

The cluster autoscaler adjusts the size of an OKD cluster to meet its current deployment needs. It uses declarative, Kubernetes-style arguments to provide infrastructure management that does not rely on objects of a specific cloud provider. The cluster autoscaler has a cluster scope, and is not associated with a particular namespace.

The cluster autoscaler increases the size of the cluster when there are pods that fail to schedule on any of the current worker nodes due to insufficient resources or when another node is necessary to meet deployment needs. The cluster autoscaler does not increase the cluster resources beyond the limits that you specify.

The cluster autoscaler computes the total memory, CPU, and GPU on all nodes the cluster, even though it does not manage the control plane nodes. These values are not single-machine oriented. They are an aggregation of all the resources in the entire cluster. For example, if you set the maximum memory resource limit, the cluster autoscaler includes all the nodes in the cluster when calculating the current memory usage. That calculation is then used to determine if the cluster autoscaler has the capacity to add more worker resources.

Every 10 seconds, the cluster autoscaler checks which nodes are unnecessary in the cluster and removes them. The cluster autoscaler considers a node for removal if the following conditions apply:

• The node utilization is less than the node utilization level threshold for the cluster. The node utilization level is the sum of the requested resources divided by the allocated resources for the node. If you do not specify a value in the ClusterAutoscaler custom resource, the cluster autoscaler uses a default value of 0.5, which corresponds to 50% utilization.

• The cluster autoscaler can move all pods running on the node to the other nodes.

• The cluster autoscaler does not have scale down disabled annotation.

If the following types of pods are present on a node, the cluster autoscaler will not remove the node:

• Pods with restrictive pod disruption budgets (PDBs).

• Kube-system pods that do not run on the node by default.

• Kube-system pods that do not have a PDB or have a PDB that is too restrictive.

• Pods that are not backed by a controller object such as a deployment, replica set, or stateful set.

• Pods with local storage.

• Pods that cannot be moved elsewhere because of a lack of resources, incompatible node selectors or affinity, matching anti-affinity, and so on.

• Unless they also have a "cluster-autoscaler.kubernetes.io/safe-to-evict": "true" annotation, pods that have a "cluster-autoscaler.kubernetes.io/safe-to-evict": "false" annotation.

For example, you set the maximum CPU limit to 64 cores and configure the cluster autoscaler to only create machines that have 8 cores each. If your cluster starts with 30 cores, the cluster autoscaler can add up to 4 more nodes with 32 cores, for a total of 62.

If you configure the cluster autoscaler, additional usage restrictions apply:

• Do not modify the nodes that are in autoscaled node groups directly. All nodes within the same node group have the same capacity and labels and run the same system pods.

• Specify requests for your pods.

• If you have to prevent pods from being deleted too quickly, configure appropriate PDBs.

• Confirm that your cloud provider quota is large enough to support the maximum node pools that you configure.

• Do not run additional node group autoscalers, especially the ones offered by your cloud provider.

The horizontal pod autoscaler (HPA) and the cluster autoscaler modify cluster resources in different ways. The HPA changes the deployment’s or replica set’s number of replicas based on the current CPU load. If the load increases, the HPA creates new replicas, regardless of the amount of resources available to the cluster. If there are not enough resources, the cluster autoscaler adds resources so that the HPA-created pods can run. If the load decreases, the HPA stops some replicas. If this action causes some nodes to be underutilized or completely empty, the cluster autoscaler deletes the unnecessary nodes.

The cluster autoscaler takes pod priorities into account. The Pod Priority and Preemption feature enables scheduling pods based on priorities if the cluster does not have enough resources, but the cluster autoscaler ensures that the cluster has resources to run all pods. To honor the intention of both features, the cluster autoscaler includes a priority cutoff function. You can use this cutoff to schedule “best-effort” pods, which do not cause the cluster autoscaler to increase resources but instead run only when spare resources are available.

Pods with priority lower than the cutoff value do not cause the cluster to scale up or prevent the cluster from scaling down. No new nodes are added to run the pods, and nodes running these pods might be deleted to free resources.

ClusterAutoscaler resource definition

This ClusterAutoscaler resource definition shows the parameters and sample values for the cluster autoscaler.

apiVersion: "autoscaling.openshift.io/v1"
kind: "ClusterAutoscaler"
metadata:
  name: "default"
spec:
  podPriorityThreshold: -10 (1)
  resourceLimits:
    maxNodesTotal: 24 (2)
    cores:
      min: 8 (3)
      max: 128 (4)
    memory:
      min: 4 (5)
      max: 256 (6)
    gpus:
      - type: nvidia.com/gpu (7)
        min: 0 (8)
        max: 16 (9)
      - type: amd.com/gpu (7)
        min: 0 (8)
        max: 4 (9)
  scaleDown: (10)
    enabled: true (11)
    delayAfterAdd: 10m (12)
    delayAfterDelete: 5m (13)
    delayAfterFailure: 30s (14)
    unneededTime: 5m (15)
    utilizationThreshold: 0.4 (16)

Deploying the cluster autoscaler

To deploy the cluster autoscaler, you create an instance of the ClusterAutoscaler resource.

Procedure

1. Create a YAML file for the ClusterAutoscaler resource that contains the customized resource definition.

2. Create the resource in the cluster:

   $ oc create -f <filename>.yaml (1)

   1	<filename> is the name of the resource file that you customized.

About the machine autoscaler

The machine autoscaler adjusts the number of Machines in the machine sets that you deploy in an OKD cluster. You can scale both the default worker machine set and any other machine sets that you create. The machine autoscaler makes more Machines when the cluster runs out of resources to support more deployments. Any changes to the values in MachineAutoscaler resources, such as the minimum or maximum number of instances, are immediately applied to the machine set they target.

MachineAutoscaler resource definition

This MachineAutoscaler resource definition shows the parameters and sample values for the machine autoscaler.

apiVersion: "autoscaling.openshift.io/v1beta1"
kind: "MachineAutoscaler"
metadata:
  name: "worker-us-east-1a" (1)
  namespace: "openshift-machine-api"
spec:
  minReplicas: 1 (2)
  maxReplicas: 12 (3)
  scaleTargetRef: (4)
    apiVersion: machine.openshift.io/v1beta1
    kind: MachineSet (5)
    name: worker-us-east-1a (6)

Deploying the machine autoscaler

To deploy the machine autoscaler, you create an instance of the MachineAutoscaler resource.

Procedure

1. Create a YAML file for the MachineAutoscaler resource that contains the customized resource definition.

2. Create the resource in the cluster:

   $ oc create -f <filename>.yaml (1)

   1	<filename> is the name of the resource file that you customized.

Enabling Technology Preview features using FeatureGates

You can turn on a subset of the current Technology Preview features on for all nodes in the cluster by editing the FeatureGate custom resource (CR).

Understanding feature gates

You can use the FeatureGate custom resource (CR) to enable specific feature sets in your cluster. A feature set is a collection of OKD features that are not enabled by default.

You can activate the following feature set by using the FeatureGate CR:

• TechPreviewNoUpgrade. This feature set is a subset of the current Technology Preview features. This feature set allows you to enable these tech preview features on test clusters, where you can fully test them, while leaving the features disabled on production clusters. Enabling this feature set cannot be undone and prevents minor version updates. This feature set is not recommended on production clusters.

  The following Technology Preview features are enabled by this feature set:

  • Microsoft Azure File CSI Driver Operator. Enables the provisioning of persistent volumes (PVs) by using the Container Storage Interface (CSI) driver for Microsoft Azure File Storage.

  • CSI automatic migration. Enables automatic migration for supported in-tree volume plug-ins to their equivalent Container Storage Interface (CSI) drivers. Supported for:

    • Amazon Web Services (AWS) Elastic Block Storage (EBS)

    • OpenStack Cinder

    • Azure Disk

    • Azure File

    • Google Cloud Platform Persistent Disk (CSI)

    • VMware vSphere

  • Cluster Cloud Controller Manager Operator. Enables the Cluster Cloud Controller Manager Operator rather than the in-tree cloud controller. Available as a Technology Preview for:

    • Alibaba Cloud

    • Amazon Web Services (AWS)

    • Google Cloud Platform (GCP)

    • IBM Cloud

    • Microsoft Azure

    • Red Hat OpenStack Platform (RHOSP)

    • VMware vSphere

  • Shared resource CSI driver

  • CSI volume support for the OKD build system

  • Swap memory on nodes

Enabling feature sets using the CLI

You can use the OpenShift CLI (oc) to enable feature sets for all of the nodes in a cluster by editing the FeatureGate custom resource (CR).

Prerequisites

• You have installed the OpenShift CLI (oc).

Procedure

To enable feature sets:

1. Edit the FeatureGate CR named cluster:

   $ oc edit featuregate cluster

   Sample FeatureGate custom resource

   apiVersion: config.openshift.io/v1
   kind: FeatureGate
   metadata:
     name: cluster (1)
   spec:
     featureSet: TechPreviewNoUpgrade (2)

   1	The name of the FeatureGate CR must be cluster.
   2	Add the feature sets that you want to enable in a comma-separated list: TechPreviewNoUpgrade enables specific Technology Preview features.

   After you save the changes, new machine configs are created, the machine config pools are updated, and scheduling on each node is disabled while the change is being applied.

   Enabling the TechPreviewNoUpgrade feature set cannot be undone and prevents minor version updates. These feature sets are not recommended on production clusters.

Verification

You can verify that the feature gates are enabled by looking at the kubelet.conf file on a node after the nodes return to the ready state.

1. Start a debug session for a node:

   $ oc debug node/<node_name>

2. Change your root directory to the host:

   sh-4.2# chroot /host

3. View the kubelet.conf file:

   sh-4.2# cat /etc/kubernetes/kubelet.conf

   Sample output

    ...
   featureGates:
     InsightsOperatorPullingSCA: true,
     LegacyNodeRoleBehavior: false
    ...

   The features that are listed as true are enabled on your cluster.

   The features listed vary depending upon the OKD version.

etcd tasks

Back up etcd, enable or disable etcd encryption, or defragment etcd data.

About etcd encryption

By default, etcd data is not encrypted in OKD. You can enable etcd encryption for your cluster to provide an additional layer of data security. For example, it can help protect the loss of sensitive data if an etcd backup is exposed to the incorrect parties.

When you enable etcd encryption, the following OpenShift API server and Kubernetes API server resources are encrypted:

• Secrets

• Config maps

• Routes

• OAuth access tokens

• OAuth authorize tokens

When you enable etcd encryption, encryption keys are created. These keys are rotated on a weekly basis. You must have these keys to restore from an etcd backup.

Enabling etcd encryption

You can enable etcd encryption to encrypt sensitive resources in your cluster.

Prerequisites

• Access to the cluster as a user with the cluster-admin role.

Procedure

1. Modify the APIServer object:

   $ oc edit apiserver

2. Set the encryption field type to aescbc:

   spec:
     encryption:
       type: aescbc (1)

   1	The aescbc type means that AES-CBC with PKCS#7 padding and a 32 byte key is used to perform the encryption.

3. Save the file to apply the changes.

   The encryption process starts. It can take 20 minutes or longer for this process to complete, depending on the size of your cluster.

4. Verify that etcd encryption was successful.

   1. Review the Encrypted status condition for the OpenShift API server to verify that its resources were successfully encrypted:

      $ oc get openshiftapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'

      The output shows EncryptionCompleted upon successful encryption:

      EncryptionCompleted
      All resources encrypted: routes.route.openshift.io

      If the output shows EncryptionInProgress, encryption is still in progress. Wait a few minutes and try again.

   2. Review the Encrypted status condition for the Kubernetes API server to verify that its resources were successfully encrypted:

      $ oc get kubeapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'

      The output shows EncryptionCompleted upon successful encryption:

      EncryptionCompleted
      All resources encrypted: secrets, configmaps

      If the output shows EncryptionInProgress, encryption is still in progress. Wait a few minutes and try again.

   3. Review the Encrypted status condition for the OpenShift OAuth API server to verify that its resources were successfully encrypted:

      $ oc get authentication.operator.openshift.io -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'

      The output shows EncryptionCompleted upon successful encryption:

      EncryptionCompleted
      All resources encrypted: oauthaccesstokens.oauth.openshift.io, oauthauthorizetokens.oauth.openshift.io

      If the output shows EncryptionInProgress, encryption is still in progress. Wait a few minutes and try again.

Disabling etcd encryption

You can disable encryption of etcd data in your cluster.

Prerequisites

• Access to the cluster as a user with the cluster-admin role.

Procedure

1. Modify the APIServer object:

   $ oc edit apiserver

2. Set the encryption field type to identity:

   spec:
     encryption:
       type: identity (1)

   1	The identity type is the default value and means that no encryption is performed.

3. Save the file to apply the changes.

   The decryption process starts. It can take 20 minutes or longer for this process to complete, depending on the size of your cluster.

4. Verify that etcd decryption was successful.

   1. Review the Encrypted status condition for the OpenShift API server to verify that its resources were successfully decrypted:

      $ oc get openshiftapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'

      The output shows DecryptionCompleted upon successful decryption:

      DecryptionCompleted
      Encryption mode set to identity and everything is decrypted

      If the output shows DecryptionInProgress, decryption is still in progress. Wait a few minutes and try again.

   2. Review the Encrypted status condition for the Kubernetes API server to verify that its resources were successfully decrypted:

      $ oc get kubeapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'

      The output shows DecryptionCompleted upon successful decryption:

      DecryptionCompleted
      Encryption mode set to identity and everything is decrypted

      If the output shows DecryptionInProgress, decryption is still in progress. Wait a few minutes and try again.

   3. Review the Encrypted status condition for the OpenShift OAuth API server to verify that its resources were successfully decrypted:

      $ oc get authentication.operator.openshift.io -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'

      The output shows DecryptionCompleted upon successful decryption:

      DecryptionCompleted
      Encryption mode set to identity and everything is decrypted

      If the output shows DecryptionInProgress, decryption is still in progress. Wait a few minutes and try again.

Backing up etcd data

Follow these steps to back up etcd data by creating an etcd snapshot and backing up the resources for the static pods. This backup can be saved and used at a later time if you need to restore etcd.

Prerequisites

• You have access to the cluster as a user with the cluster-admin role.

• You have checked whether the cluster-wide proxy is enabled.

  You can check whether the proxy is enabled by reviewing the output of oc get proxy cluster -o yaml. The proxy is enabled if the httpProxy, httpsProxy, and noProxy fields have values set.

Procedure

1. Start a debug session for a control plane node:

   $ oc debug node/<node_name>

2. Change your root directory to the host:

   sh-4.2# chroot /host

3. If the cluster-wide proxy is enabled, be sure that you have exported the NO_PROXY, HTTP_PROXY, and HTTPS_PROXY environment variables.

4. Run the cluster-backup.sh script and pass in the location to save the backup to.

   The cluster-backup.sh script is maintained as a component of the etcd Cluster Operator and is a wrapper around the etcdctl snapshot save command.

   sh-4.4# /usr/local/bin/cluster-backup.sh /home/core/assets/backup

   Example script output

   found latest kube-apiserver: /etc/kubernetes/static-pod-resources/kube-apiserver-pod-6
   found latest kube-controller-manager: /etc/kubernetes/static-pod-resources/kube-controller-manager-pod-7
   found latest kube-scheduler: /etc/kubernetes/static-pod-resources/kube-scheduler-pod-6
   found latest etcd: /etc/kubernetes/static-pod-resources/etcd-pod-3
   ede95fe6b88b87ba86a03c15e669fb4aa5bf0991c180d3c6895ce72eaade54a1
   etcdctl version: 3.4.14
   API version: 3.4
   {"level":"info","ts":1624647639.0188997,"caller":"snapshot/v3_snapshot.go:119","msg":"created temporary db file","path":"/home/core/assets/backup/snapshot_2021-06-25_190035.db.part"}
   {"level":"info","ts":"2021-06-25T19:00:39.030Z","caller":"clientv3/maintenance.go:200","msg":"opened snapshot stream; downloading"}
   {"level":"info","ts":1624647639.0301006,"caller":"snapshot/v3_snapshot.go:127","msg":"fetching snapshot","endpoint":"https://10.0.0.5:2379"}
   {"level":"info","ts":"2021-06-25T19:00:40.215Z","caller":"clientv3/maintenance.go:208","msg":"completed snapshot read; closing"}
   {"level":"info","ts":1624647640.6032252,"caller":"snapshot/v3_snapshot.go:142","msg":"fetched snapshot","endpoint":"https://10.0.0.5:2379","size":"114 MB","took":1.584090459}
   {"level":"info","ts":1624647640.6047094,"caller":"snapshot/v3_snapshot.go:152","msg":"saved","path":"/home/core/assets/backup/snapshot_2021-06-25_190035.db"}
   Snapshot saved at /home/core/assets/backup/snapshot_2021-06-25_190035.db
   {"hash":3866667823,"revision":31407,"totalKey":12828,"totalSize":114446336}
   snapshot db and kube resources are successfully saved to /home/core/assets/backup

   In this example, two files are created in the /home/core/assets/backup/ directory on the control plane host:

   • snapshot_<datetimestamp>.db: This file is the etcd snapshot. The cluster-backup.sh script confirms its validity.

   • static_kuberesources_<datetimestamp>.tar.gz: This file contains the resources for the static pods. If etcd encryption is enabled, it also contains the encryption keys for the etcd snapshot.

     If etcd encryption is enabled, it is recommended to store this second file separately from the etcd snapshot for security reasons. However, this file is required to restore from the etcd snapshot. Keep in mind that etcd encryption only encrypts values, not keys. This means that resource types, namespaces, and object names are unencrypted.

Defragmenting etcd data

Defragment etcd data to reclaim disk space after events that cause disk fragmentation, such as etcd history compaction.

History compaction is performed automatically every five minutes and leaves gaps in the back-end database. This fragmented space is available for use by etcd, but is not available to the host file system. You must defragment etcd to make this space available to the host file system.

Defragmentation occurs automatically, but you can also trigger it manually.

Automatic defragmentation

The etcd Operator automatically defragments disks. No manual intervention is needed.

Verify that the defragmentation process is successful by viewing one of these logs:

• etcd logs

• cluster-etcd-operator pod

• operator status error log

Example log output

I0907 08:43:12.171919       1
defragcontroller.go:198] etcd member "ip-
10-0-191-150.us-west-2.compute.internal"
backend store fragmented: 39.33 %, dbSize:
349138944

Manual defragmentation

You can monitor the etcd_db_total_size_in_bytes metric to determine whether manual defragmentation is necessary.

Follow this procedure to defragment etcd data on each etcd member.

Prerequisites

• You have access to the cluster as a user with the cluster-admin role.

Procedure

1. Determine which etcd member is the leader, because the leader should be defragmented last.

   1. Get the list of etcd pods:

      $ oc get pods -n openshift-etcd -o wide | grep -v quorum-guard | grep etcd

      Example output

      etcd-ip-10-0-159-225.example.redhat.com                3/3     Running     0          175m   10.0.159.225   ip-10-0-159-225.example.redhat.com   <none>           <none>
      etcd-ip-10-0-191-37.example.redhat.com                 3/3     Running     0          173m   10.0.191.37    ip-10-0-191-37.example.redhat.com    <none>           <none>
      etcd-ip-10-0-199-170.example.redhat.com                3/3     Running     0          176m   10.0.199.170   ip-10-0-199-170.example.redhat.com   <none>           <none>

   2. Choose a pod and run the following command to determine which etcd member is the leader:

      $ oc rsh -n openshift-etcd etcd-ip-10-0-159-225.us-west-1.compute.internal etcdctl endpoint status --cluster -w table

      Example output

      Defaulting container name to etcdctl.
      Use 'oc describe pod/etcd-ip-10-0-159-225.example.redhat.com -n openshift-etcd' to see all of the containers in this pod.
      +---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
      |         ENDPOINT          |        ID        | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
      +---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
      |  https://10.0.191.37:2379 | 251cd44483d811c3 |   3.4.9 |  104 MB |     false |      false |         7 |      91624 |              91624 |        |
      | https://10.0.159.225:2379 | 264c7c58ecbdabee |   3.4.9 |  104 MB |     false |      false |         7 |      91624 |              91624 |        |
      | https://10.0.199.170:2379 | 9ac311f93915cc79 |   3.4.9 |  104 MB |      true |      false |         7 |      91624 |              91624 |        |
      +---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+

      Based on the IS LEADER column of this output, the https://10.0.199.170:2379 endpoint is the leader. Matching this endpoint with the output of the previous step, the pod name of the leader is etcd-ip-10-0-199-170.example.redhat.com.

2. Defragment an etcd member.

   1. Connect to the running etcd container, passing in the name of a pod that is not the leader:

      $ oc rsh -n openshift-etcd etcd-ip-10-0-159-225.example.redhat.com

   2. Unset the ETCDCTL_ENDPOINTS environment variable:

      sh-4.4# unset ETCDCTL_ENDPOINTS

   3. Defragment the etcd member:

      sh-4.4# etcdctl --command-timeout=30s --endpoints=https://localhost:2379 defrag

      Example output

      Finished defragmenting etcd member[https://localhost:2379]

      If a timeout error occurs, increase the value for --command-timeout until the command succeeds.

   4. Verify that the database size was reduced:

      sh-4.4# etcdctl endpoint status -w table --cluster

      Example output

      +---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
      |         ENDPOINT          |        ID        | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
      +---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
      |  https://10.0.191.37:2379 | 251cd44483d811c3 |   3.4.9 |  104 MB |     false |      false |         7 |      91624 |              91624 |        |
      | https://10.0.159.225:2379 | 264c7c58ecbdabee |   3.4.9 |   41 MB |     false |      false |         7 |      91624 |              91624 |        | (1)
      | https://10.0.199.170:2379 | 9ac311f93915cc79 |   3.4.9 |  104 MB |      true |      false |         7 |      91624 |              91624 |        |
      +---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+

      This example shows that the database size for this etcd member is now 41 MB as opposed to the starting size of 104 MB.

   5. Repeat these steps to connect to each of the other etcd members and defragment them. Always defragment the leader last.

      Wait at least one minute between defragmentation actions to allow the etcd pod to recover. Until the etcd pod recovers, the etcd member will not respond.

3. If any NOSPACE alarms were triggered due to the space quota being exceeded, clear them.

   1. Check if there are any NOSPACE alarms:

      sh-4.4# etcdctl alarm list

      Example output

      memberID:12345678912345678912 alarm:NOSPACE

   2. Clear the alarms:

      sh-4.4# etcdctl alarm disarm

Restoring to a previous cluster state

You can use a saved etcd backup to restore a previous cluster state or restore a cluster that has lost the majority of control plane hosts.

Prerequisites

• Access to the cluster as a user with the cluster-admin role.

• A healthy control plane host to use as the recovery host.

• SSH access to control plane hosts.

• A backup directory containing both the etcd snapshot and the resources for the static pods, which were from the same backup. The file names in the directory must be in the following formats: snapshot_<datetimestamp>.db and static_kuberesources_<datetimestamp>.tar.gz.

Procedure

1. Select a control plane host to use as the recovery host. This is the host that you will run the restore operation on.

2. Establish SSH connectivity to each of the control plane nodes, including the recovery host.

   The Kubernetes API server becomes inaccessible after the restore process starts, so you cannot access the control plane nodes. For this reason, it is recommended to establish SSH connectivity to each control plane host in a separate terminal.

   If you do not complete this step, you will not be able to access the control plane hosts to complete the restore procedure, and you will be unable to recover your cluster from this state.

3. Copy the etcd backup directory to the recovery control plane host.

   This procedure assumes that you copied the backup directory containing the etcd snapshot and the resources for the static pods to the /home/core/ directory of your recovery control plane host.

4. Stop the static pods on any other control plane nodes.

   It is not required to manually stop the pods on the recovery host. The recovery script will stop the pods on the recovery host.

   1. Access a control plane host that is not the recovery host.

   2. Move the existing etcd pod file out of the kubelet manifest directory:

      $ sudo mv /etc/kubernetes/manifests/etcd-pod.yaml /tmp

   3. Verify that the etcd pods are stopped.

      $ sudo crictl ps | grep etcd | grep -v operator

      The output of this command should be empty. If it is not empty, wait a few minutes and check again.

   4. Move the existing Kubernetes API server pod file out of the kubelet manifest directory:

      $ sudo mv /etc/kubernetes/manifests/kube-apiserver-pod.yaml /tmp

   5. Verify that the Kubernetes API server pods are stopped.

      $ sudo crictl ps | grep kube-apiserver | grep -v operator

      The output of this command should be empty. If it is not empty, wait a few minutes and check again.

   6. Move the etcd data directory to a different location:

      $ sudo mv /var/lib/etcd/ /tmp

   7. Repeat this step on each of the other control plane hosts that is not the recovery host.

5. Access the recovery control plane host.

6. If the cluster-wide proxy is enabled, be sure that you have exported the NO_PROXY, HTTP_PROXY, and HTTPS_PROXY environment variables.

   You can check whether the proxy is enabled by reviewing the output of oc get proxy cluster -o yaml. The proxy is enabled if the httpProxy, httpsProxy, and noProxy fields have values set.

7. Run the restore script on the recovery control plane host and pass in the path to the etcd backup directory:

   $ sudo -E /usr/local/bin/cluster-restore.sh /home/core/backup

   Example script output

   ...stopping kube-scheduler-pod.yaml
   ...stopping kube-controller-manager-pod.yaml
   ...stopping etcd-pod.yaml
   ...stopping kube-apiserver-pod.yaml
   Waiting for container etcd to stop
   .complete
   Waiting for container etcdctl to stop
   .............................complete
   Waiting for container etcd-metrics to stop
   complete
   Waiting for container kube-controller-manager to stop
   complete
   Waiting for container kube-apiserver to stop
   ..........................................................................................complete
   Waiting for container kube-scheduler to stop
   complete
   Moving etcd data-dir /var/lib/etcd/member to /var/lib/etcd-backup
   starting restore-etcd static pod
   starting kube-apiserver-pod.yaml
   static-pod-resources/kube-apiserver-pod-7/kube-apiserver-pod.yaml
   starting kube-controller-manager-pod.yaml
   static-pod-resources/kube-controller-manager-pod-7/kube-controller-manager-pod.yaml
   starting kube-scheduler-pod.yaml
   static-pod-resources/kube-scheduler-pod-8/kube-scheduler-pod.yaml

8. Restart the kubelet service on all control plane hosts.

   1. From the recovery host, run the following command:

      $ sudo systemctl restart kubelet.service

   2. Repeat this step on all other control plane hosts.

9. Approve the pending CSRs:

   1. Get the list of current CSRs:

      $ oc get csr

      Example output

      NAME        AGE    SIGNERNAME                                    REQUESTOR                                                                   CONDITION
      csr-2s94x   8m3s   kubernetes.io/kubelet-serving                 system:node:<node_name>                                                     Pending (1)
      csr-4bd6t   8m3s   kubernetes.io/kubelet-serving                 system:node:<node_name>                                                     Pending (1)
      csr-4hl85   13m    kubernetes.io/kube-apiserver-client-kubelet   system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending (2)
      csr-zhhhp   3m8s   kubernetes.io/kube-apiserver-client-kubelet   system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending (2)
      ...

      1	A pending kubelet service CSR (for user-provisioned installations).
      2	A pending node-bootstrapper CSR.

   2. Review the details of a CSR to verify that it is valid:

      $ oc describe csr <csr_name> (1)

      1	<csr_name> is the name of a CSR from the list of current CSRs.

   3. Approve each valid node-bootstrapper CSR:

      $ oc adm certificate approve <csr_name>

   4. For user-provisioned installations, approve each valid kubelet service CSR:

      $ oc adm certificate approve <csr_name>

10. Verify that the single member control plane has started successfully.

    1. From the recovery host, verify that the etcd container is running.

       $ sudo crictl ps | grep etcd | grep -v operator

       Example output

       3ad41b7908e32       36f86e2eeaaffe662df0d21041eb22b8198e0e58abeeae8c743c3e6e977e8009                                                         About a minute ago   Running             etcd                                          0                   7c05f8af362f0

    2. From the recovery host, verify that the etcd pod is running.

       $ oc get pods -n openshift-etcd | grep -v etcd-quorum-guard | grep etcd

       If you attempt to run oc login prior to running this command and receive the following error, wait a few moments for the authentication controllers to start and try again. Unable to connect to the server: EOF

       Example output

       NAME                                             READY   STATUS      RESTARTS   AGE
       etcd-ip-10-0-143-125.ec2.internal                1/1     Running     1          2m47s

       If the status is Pending, or the output lists more than one running etcd pod, wait a few minutes and check again.

    3. Repeat this step for each lost control plane host that is not the recovery host.

11. Delete and recreate other non-recovery, control plane machines, one by one. After these machines are recreated, a new revision is forced and etcd scales up automatically.

    If you are running installer-provisioned infrastructure, or you used the Machine API to create your machines, follow these steps. Otherwise, you must create the new master node using the same method that was used to originally create it.

    Do not delete and recreate the machine for the recovery host.

    1. Obtain the machine for one of the lost control plane hosts.

       In a terminal that has access to the cluster as a cluster-admin user, run the following command:

       $ oc get machines -n openshift-machine-api -o wide

       Example output:

       NAME                                        PHASE     TYPE        REGION      ZONE         AGE     NODE                           PROVIDERID                              STATE
       clustername-8qw5l-master-0                  Running   m4.xlarge   us-east-1   us-east-1a   3h37m   ip-10-0-131-183.ec2.internal   aws:///us-east-1a/i-0ec2782f8287dfb7e   stopped (1)
       clustername-8qw5l-master-1                  Running   m4.xlarge   us-east-1   us-east-1b   3h37m   ip-10-0-143-125.ec2.internal   aws:///us-east-1b/i-096c349b700a19631   running
       clustername-8qw5l-master-2                  Running   m4.xlarge   us-east-1   us-east-1c   3h37m   ip-10-0-154-194.ec2.internal    aws:///us-east-1c/i-02626f1dba9ed5bba  running
       clustername-8qw5l-worker-us-east-1a-wbtgd   Running   m4.large    us-east-1   us-east-1a   3h28m   ip-10-0-129-226.ec2.internal   aws:///us-east-1a/i-010ef6279b4662ced   running
       clustername-8qw5l-worker-us-east-1b-lrdxb   Running   m4.large    us-east-1   us-east-1b   3h28m   ip-10-0-144-248.ec2.internal   aws:///us-east-1b/i-0cb45ac45a166173b   running
       clustername-8qw5l-worker-us-east-1c-pkg26   Running   m4.large    us-east-1   us-east-1c   3h28m   ip-10-0-170-181.ec2.internal   aws:///us-east-1c/i-06861c00007751b0a   running

       1	This is the control plane machine for the lost control plane host, ip-10-0-131-183.ec2.internal.

    2. Save the machine configuration to a file on your file system:

       $ oc get machine clustername-8qw5l-master-0 \ (1)
          -n openshift-machine-api \
          -o yaml \
          > new-master-machine.yaml

       1	Specify the name of the control plane machine for the lost control plane host.

    3. Edit the new-master-machine.yaml file that was created in the previous step to assign a new name and remove unnecessary fields.

       1. Remove the entire status section:

          status:
           addresses:
           - address: 10.0.131.183
             type: InternalIP
           - address: ip-10-0-131-183.ec2.internal
             type: InternalDNS
           - address: ip-10-0-131-183.ec2.internal
             type: Hostname
           lastUpdated: "2020-04-20T17:44:29Z"
           nodeRef:
             kind: Node
             name: ip-10-0-131-183.ec2.internal
             uid: acca4411-af0d-4387-b73e-52b2484295ad
           phase: Running
           providerStatus:
             apiVersion: awsproviderconfig.openshift.io/v1beta1
             conditions:
             - lastProbeTime: "2020-04-20T16:53:50Z"
               lastTransitionTime: "2020-04-20T16:53:50Z"
               message: machine successfully created
               reason: MachineCreationSucceeded
               status: "True"
               type: MachineCreation
             instanceId: i-0fdb85790d76d0c3f
             instanceState: stopped
             kind: AWSMachineProviderStatus

       2. Change the metadata.name field to a new name.

          It is recommended to keep the same base name as the old machine and change the ending number to the next available number. In this example, clustername-8qw5l-master-0 is changed to clustername-8qw5l-master-3:

          apiVersion: machine.openshift.io/v1beta1
          kind: Machine
          metadata:
           ...
           name: clustername-8qw5l-master-3
           ...

       3. Remove the spec.providerID field:

          providerID: aws:///us-east-1a/i-0fdb85790d76d0c3f

       4. Remove the metadata.annotations and metadata.generation fields:

          annotations:
           machine.openshift.io/instance-state: running
          ...
          generation: 2

       5. Remove the metadata.resourceVersion and metadata.uid fields:

          resourceVersion: "13291"
          uid: a282eb70-40a2-4e89-8009-d05dd420d31a

    4. Delete the machine of the lost control plane host:

       $ oc delete machine -n openshift-machine-api clustername-8qw5l-master-0 (1)

       1	Specify the name of the control plane machine for the lost control plane host.

    5. Verify that the machine was deleted:

       $ oc get machines -n openshift-machine-api -o wide

       Example output:

       NAME                                        PHASE     TYPE        REGION      ZONE         AGE     NODE                           PROVIDERID                              STATE
       clustername-8qw5l-master-1                  Running   m4.xlarge   us-east-1   us-east-1b   3h37m   ip-10-0-143-125.ec2.internal   aws:///us-east-1b/i-096c349b700a19631   running
       clustername-8qw5l-master-2                  Running   m4.xlarge   us-east-1   us-east-1c   3h37m   ip-10-0-154-194.ec2.internal   aws:///us-east-1c/i-02626f1dba9ed5bba  running
       clustername-8qw5l-worker-us-east-1a-wbtgd   Running   m4.large    us-east-1   us-east-1a   3h28m   ip-10-0-129-226.ec2.internal   aws:///us-east-1a/i-010ef6279b4662ced   running
       clustername-8qw5l-worker-us-east-1b-lrdxb   Running   m4.large    us-east-1   us-east-1b   3h28m   ip-10-0-144-248.ec2.internal   aws:///us-east-1b/i-0cb45ac45a166173b   running
       clustername-8qw5l-worker-us-east-1c-pkg26   Running   m4.large    us-east-1   us-east-1c   3h28m   ip-10-0-170-181.ec2.internal   aws:///us-east-1c/i-06861c00007751b0a   running

    6. Create the new machine using the new-master-machine.yaml file:

       $ oc apply -f new-master-machine.yaml

    7. Verify that the new machine has been created:

       $ oc get machines -n openshift-machine-api -o wide

       Example output:

       NAME                                        PHASE          TYPE        REGION      ZONE         AGE     NODE                           PROVIDERID                              STATE
       clustername-8qw5l-master-1                  Running        m4.xlarge   us-east-1   us-east-1b   3h37m   ip-10-0-143-125.ec2.internal   aws:///us-east-1b/i-096c349b700a19631   running
       clustername-8qw5l-master-2                  Running        m4.xlarge   us-east-1   us-east-1c   3h37m   ip-10-0-154-194.ec2.internal    aws:///us-east-1c/i-02626f1dba9ed5bba  running
       clustername-8qw5l-master-3                  Provisioning   m4.xlarge   us-east-1   us-east-1a   85s     ip-10-0-173-171.ec2.internal    aws:///us-east-1a/i-015b0888fe17bc2c8  running (1)
       clustername-8qw5l-worker-us-east-1a-wbtgd   Running        m4.large    us-east-1   us-east-1a   3h28m   ip-10-0-129-226.ec2.internal   aws:///us-east-1a/i-010ef6279b4662ced   running
       clustername-8qw5l-worker-us-east-1b-lrdxb   Running        m4.large    us-east-1   us-east-1b   3h28m   ip-10-0-144-248.ec2.internal   aws:///us-east-1b/i-0cb45ac45a166173b   running
       clustername-8qw5l-worker-us-east-1c-pkg26   Running        m4.large    us-east-1   us-east-1c   3h28m   ip-10-0-170-181.ec2.internal   aws:///us-east-1c/i-06861c00007751b0a   running

       1	The new machine, clustername-8qw5l-master-3 is being created and is ready after the phase changes from Provisioning to Running.

       It might take a few minutes for the new machine to be created. The etcd cluster Operator will automatically sync when the machine or node returns to a healthy state.

    8. Repeat these steps for each lost control plane host that is not the recovery host.

12. In a separate terminal window, log in to the cluster as a user with the cluster-admin role by using the following command:

    $ oc login -u <cluster_admin> (1)

    1	For <cluster_admin>, specify a user name with the cluster-admin role.

13. Force etcd redeployment.

    In a terminal that has access to the cluster as a cluster-admin user, run the following command:

    $ oc patch etcd cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge (1)

    1	The forceRedeploymentReason value must be unique, which is why a timestamp is appended.

    When the etcd cluster Operator performs a redeployment, the existing nodes are started with new pods similar to the initial bootstrap scale up.

14. Verify all nodes are updated to the latest revision.

    In a terminal that has access to the cluster as a cluster-admin user, run the following command:

    $ oc get etcd -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

    Review the NodeInstallerProgressing status condition for etcd to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

    AllNodesAtLatestRevision
    3 nodes are at revision 7 (1)

    1	In this example, the latest revision number is 7.

    If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

15. After etcd is redeployed, force new rollouts for the control plane. The Kubernetes API server will reinstall itself on the other nodes because the kubelet is connected to API servers using an internal load balancer.

    In a terminal that has access to the cluster as a cluster-admin user, run the following commands.

    1. Force a new rollout for the Kubernetes API server:

       $ oc patch kubeapiserver cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge

       Verify all nodes are updated to the latest revision.

       $ oc get kubeapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

       Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

       AllNodesAtLatestRevision
       3 nodes are at revision 7 (1)

       1	In this example, the latest revision number is 7.

       If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

    2. Force a new rollout for the Kubernetes controller manager:

       $ oc patch kubecontrollermanager cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge

       Verify all nodes are updated to the latest revision.

       $ oc get kubecontrollermanager -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

       Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

       AllNodesAtLatestRevision
       3 nodes are at revision 7 (1)

       1	In this example, the latest revision number is 7.

       If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

    3. Force a new rollout for the Kubernetes scheduler:

       $ oc patch kubescheduler cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge

       Verify all nodes are updated to the latest revision.

       $ oc get kubescheduler -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

       Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

       AllNodesAtLatestRevision
       3 nodes are at revision 7 (1)

       1	In this example, the latest revision number is 7.

       If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

16. Verify that all control plane hosts have started and joined the cluster.

    In a terminal that has access to the cluster as a cluster-admin user, run the following command:

    $ oc get pods -n openshift-etcd | grep -v etcd-quorum-guard | grep etcd

    Example output

    etcd-ip-10-0-143-125.ec2.internal                2/2     Running     0          9h
    etcd-ip-10-0-154-194.ec2.internal                2/2     Running     0          9h
    etcd-ip-10-0-173-171.ec2.internal                2/2     Running     0          9h