Mitsubishi FX

The Mitsubishi FX plug-in is used to access Mitsubishi’s FX0, FX2, FX3 and other PLC series via the FX programming port.

Add Device

Go to Configuration -> South Devices, then click Add Device to add the driver. Configure the following settings in the popup dialog box.

  • Name: The name of this device node.
  • Plugin: Select the Mitsubishi FX plugin.

Device Configuration

After clicking Create, you will be redirected to the Device Configuration page, where we will set up the parameters required for Neuron to establish a connection with the northbound application. You can also click the device configuration icon on the southbound device card to enter the Device Configuration interface.

ParameterDescription
Connection TimeoutConnection timeout, default is 3000 milliseconds
Send IntervalCommand transmission interval, default 20 ms
Serial DeviceSerial device path
Stop BitsStop bits, default is 1
ParityParity, default is even
Baud RateBaud rate, default is 9600
Data BitsData Bits, default is 7

Configure Data Groups and Tags

After the plug-in is added and configured, the next step is to establish communication between your device and Neuron by adding groups and tags to the Southbound driver.

Once device configuration is completed, navigate to the South Devices page. Click on the device card or device row to access the Group List page. Here, you can create a new group by clicking on Create, then specifying the group name and data collection interval.

Upon successfully creating a group, click on its name to proceed to the Tag List page. This page allows you to add device tags for data collection. You’ll need to provide information such as the tag address, attributes, and data type.

For information on general configuration items, see Connect to Southbound Devices. The subsequent section will concentrate on configurations specific to the driver.

Data Types

  • INT16
  • UINT16
  • INT32
  • UINT32
  • FLOAT
  • DOUBLE
  • BIT
  • STRING

Address Format

AREA ADDRESS[.BIT][.LEN[H][L]]

AREA ADDRESS

AREATYPEATTRIBUTEREMARK
Xbitread/writeInput relay (FX3U)
Ybitread/writeOutput relay (FX3U)
Mbitread/writeInternal relay (FX3U)
Sbitread/writeStatus relay (FX3U)
TSbitread/writeTimer Contact (FX3U)
CSbitread/writeCounter Contact (FX3U)
TNallread/writeTimer Current value (FX3U)
CNallread/writeCounter Current value (FX3U)
Dallread/writeData register (FX3)

.BIT

Only available for non-bit type area, means read the specified binary bit of the specified address, the binary bit index interval is [0, 15].

AddressData TypeDescription
D20.0bitD Area, address 20, bit 0
D20.2bitD Area, address 20, bit 2

.LEN[H][L]

When the data type is string type, .LEN indicates the length of the string; you can optionally fill in H and L to indicate two byte orders, and the default is the byte order of H.

Example Addresses

AddressData TypeDescription
X0bitX Area, address is 0
X1bitX Area, address is 1
Y0bitY Area, address is 0
Y1bitY Area, address is 1
D100int16D Area, address is 100
D120uint16D Area, address is 120
D200uint32D Area, address is 200
D10floatD Area, address is 10
D20doubleD Area, address is 20
D152.16LstringD Area, address is 152, string length is 16, endianness is L
D183.16stringD Area, address is 183, string length is 16, endianness H

Data Monitoring

After completing the point configuration, you can click Monitoring -> Data Monitoring to view device information and control devices. For details, refer to Data Monitoring.