dmesg

显示Linux系统启动信息

补充说明

dmesg命令 被用于检查和控制内核的环形缓冲区。kernel会将开机信息存储在ring buffer中。您若是开机时来不及查看信息,可利用dmesg来查看。开机信息保存在/var/log/dmesg文件里。

语法

  1. dmesg(选项)

选项

  1. -c:显示信息后,清除ring buffer中的内容;
  2. -s<缓冲区大小>:预设置为8196,刚好等于ring buffer的大小;
  3. -n:设置记录信息的层级。

实例

  1. [root@localhost ~]# dmesg | head
  2. Linux version 2.6.18-348.6.1.el5 (mockbuild@builder17.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue May 21 15:34:22 EDT 2013
  3. BIOS-provided physical RAM map:
  4. BIOS-e820: 0000000000010000 - 000000000009f400 (usable)
  5. BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  6. BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  7. BIOS-e820: 0000000000100000 - 000000007f590000 (usable)
  8. BIOS-e820: 000000007f590000 - 000000007f5e3000 (ACPI NVS)
  9. BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
  10. BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
  11. BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved)

查看硬盘基础信息

  1. dmesg | grep sda
  2. [ 2.442555] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
  3. [ 2.442590] sd 0:0:0:0: [sda] Write Protect is off
  4. [ 2.442592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  5. [ 2.442607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  6. [ 2.447533] sda: sda1
  7. [ 2.448503] sd 0:0:0:0: [sda] Attached SCSI disk

查看多关键字

  1. dmesg | grep -E "vcc5v0_host|vcc_3v3_s0|ttyS"
  2. [ 1.193143] vcc5v0_host: supplied by vcc5v0_usb
  3. [ 1.481139] feb80000.serial: ttyS5 at MMIO 0xfeb80000 (irq = 73, base_baud = 1500000) is a 16550A
  4. [ 1.513541] vcc_3v3_s0: supplied by vcc5v0_sys