Install Istio with the Istio CNI plugin

Follow this guide to install, configure, and use an Istio mesh using the Istio Container Network Interface (CNI) plugin.

By default Istio injects an initContainer, istio-init, in pods deployed in the mesh. The istio-init container sets up the pod network traffic redirection to/from the Istio sidecar proxy. This requires the user or service-account deploying pods to the mesh to have sufficient Kubernetes RBAC permissions to deploy containers with the NET_ADMIN and NET_RAW capabilities. Requiring Istio users to have elevated Kubernetes RBAC permissions is problematic for some organizations’ security compliance. The Istio CNI plugin is a replacement for the istio-init container that performs the same networking functionality but without requiring Istio users to enable elevated Kubernetes RBAC permissions.

The Istio CNI plugin performs the Istio mesh pod traffic redirection in the Kubernetes pod lifecycle’s network setup phase, thereby removing the requirement for the NET_ADMIN and NET_RAW capabilities for users deploying pods into the Istio mesh. The Istio CNI plugin replaces the functionality provided by the istio-init container.

Prerequisites

  1. Install Kubernetes with the container runtime supporting CNI and kubelet configured with the main CNI plugin enabled via --network-plugin=cni.

    • AWS EKS, Azure AKS, and IBM Cloud IKS clusters have this capability.
    • Google Cloud GKE clusters require that the network-policy feature is enabled to have Kubernetes configured with network-plugin=cni.
    • OpenShift has CNI enabled by default.
  2. Install Kubernetes with the ServiceAccount admission controller enabled.

    • The Kubernetes documentation highly recommends this for all Kubernetes installations where ServiceAccounts are utilized.

Installation

  1. Determine the Kubernetes environment’s CNI plugin --cni-bin-dir and --cni-conf-dir settings. Refer to Hosted Kubernetes settings for any non-default settings required.

  2. Install Istio CNI and Istio using istioctl. Refer to the Istio install instructions and pass --set components.cni.enabled=true option. Pass --set values.cni.cniBinDir=... and/or --set values.cni.cniConfDir=... options when installing istio-cni if non-default, as determined in the previous step.

Helm chart parameters

The following table shows all the options that the istio-cni configuration supports:

OptionValuesDefaultDescription
hubThe container registry to pull the install-cni image.
tagThe container tag to use to pull the install-cni image.
pullPolicyAlwaysThe image pull policy for the install-cni image.
logLevelpanic, fatal, error, warn, info, debugwarnLogging level for CNI binary.
excludeNamespaces[]string[ istio-system ]List of namespaces to exclude from Istio pod check.
cniBinDir/opt/cni/binMust be the same as the environment’s —cni-bin-dir setting (kubelet parameter).
cniConfDir/etc/cni/net.dMust be the same as the environment’s —cni-conf-dir setting (kubelet parameter).
cniConfFileNameLeave unset to auto-find the first file in the cni-conf-dir (as kubelet does). Primarily used for testing install-cni plugin configuration. If set, install-cni will inject the plugin configuration into this file in the cni-conf-dir.
psp_cluster_roleThis value refers to a ClusterRole and can be used to create a RoleBinding in the namespace of istio-cni. This is useful if you use Pod Security Policies and want to allow istio-cni to run as priviliged Pods.
podAnnotations{}Additional custom annotations to be set on pod level.
repair.enabledbooleantrueEnable or disable the CNI Race Condition detection and repair functionality. This injects an istio-validation init container into every injected pod, which checks if Istio CNI correctly initialized the pod’s networking configuration. It also enables a new container in the CNI DaemonSet which monitors for pods and either labels or deletes them, per the values below.
repair.hubThe container registry to pull the install-cni image for the repair container. Defaults to the same as hub.
repair.tagThe container tag to use to pull the install-cni image for the repair container. Defaults to the same as tag.
repair.initContainerNameistio-validationAn override for the init container name inspected by the repair controller, if you are using a non-standard pod injection configuration.
repair.labelPodsbooleantrueEnable the repair controller to label pods it detects as uninitialized. Ignored if deletePods is true.
repair.deletePodsbooleantrueEnable the repair controller to delete pods it detects as uninitialized. It will continue deleting those pods until CNI initializes them correctly.
repair.brokenPodLabelKeycni.istio.io/uninitializedThe key portion of the label to add to broken pods when labelPods is true.
repair.brokenPodLabelValuetrueThe value portion of the label to add to broken pods when labelPods is true.
chainedtrue or falsetrueWhether to deploy the configuration file as a plugin chain or as a standalone file in cni-conf-dir. Some Kubernetes flavors (e.g. OpenShift) do not support the chain approach, set to false if this is the case.

These options are accessed through values.cni.<option-name> in istioctl manifest commands, either as a --set flag, or the corresponding path in a custom overlay file.

Excluding specific Kubernetes namespaces

This example uses istioctl to perform the following tasks:

  • Install the Istio CNI plugin.
  • Configure its log level.
  • Ignore the pods in the following namespaces:
    • istio-system
    • foo_ns
    • bar_ns

Refer to the Customizable Install with Istioctl for complete instructions.

Use the following command to render and apply Istio CNI components and override the default configuration of the logLevel and excludeNamespaces parameters for istio-cni:

Create a IstioControlPlane CR yaml locally with your override to install istio, e.g. cni.yaml

  1. apiVersion: install.istio.io/v1alpha1
  2. kind: IstioOperator
  3. spec:
  4. components:
  5. cni:
  6. enabled: true
  7. values:
  8. cni:
  9. excludeNamespaces:
  10. - istio-system
  11. - kube-system
  12. - foo_ns
  13. - bar_ns
  14. logLevel: info
  1. $ istioctl manifest apply -f cni.yaml

Hosted Kubernetes settings

The Istio CNI solution is not ubiquitous. Some platforms, especially hosted Kubernetes environments, do not enable the CNI plugin in the kubelet configuration. The istio-cni plugin is expected to work with any hosted Kubernetes leveraging CNI plugins. The following table shows the required settings for many common Kubernetes environments.

Hosted Cluster TypeRequired Istio CNI Setting OverridesRequired Platform Setting Overrides
GKE 1.9+ (see GKE setup below for details)—set components.cni.namespace=kube-system —set values.cni.cniBinDir=/home/kubernetes/binenable network-policy
IKS (IBM cloud)(none)(none)
EKS (AWS)(none)(none)
AKS (Azure)(none)(none)
Red Hat OpenShift 3.10+(none)(none)
Red Hat OpenShift 4.2+—set components.cni.namespace=kube-system —set values.cni.cniBinDir=/var/lib/cni/bin —set values.cni.cniConfDir=/etc/cni/multus/net.d —set values.cni.chained=false —set values.cni.cniConfFileName=”istio-cni.conf” —set values.sidecarInjectorWebhook.injectedAnnotations.”k8s.v1.cni.cncf.io/networks”=istio-cni(none)

Instructions for Istio 1.4.x and OpenShift

Due to a limitation in istioctl 1.4.x using --set with escaped strings, a YAML file is necessary to set values.sidecarInjectorWebhook.injectedAnnotations to install Istio on OpenShift. Create the YAML file:

  1. cat <<'EOF' > cni-annotations.yaml
  2. apiVersion: install.istio.io/v1alpha1
  3. kind: IstioOperator
  4. spec:
  5. cni:
  6. enabled: true
  7. components:
  8. cni:
  9. namespace: kube-system
  10. values:
  11. cni:
  12. chained: false
  13. cniBinDir: /var/lib/cni/bin
  14. cniConfDir: /etc/cni/multus/net.d
  15. cniConfFileName: istio-cni.conf
  16. sidecarInjectorWebhook:
  17. injectedAnnotations:
  18. "k8s.v1.cni.cncf.io/networks": istio-cni
  19. EOF

Then pass this file as an argument to istioctl, for example:

  1. $ istioctl manifest apply -f cni-annotations.yaml

You can pass other command line arguments with --set if necessary.

In order to deploy Istio 1.4 on OpenShift with CNI you need to use at least Istio 1.4.8.

GKE setup

  1. Refer to the procedure to prepare a GKE cluster for Istio and enable network-policy in your cluster.

    For existing clusters, this redeploys all nodes.

  2. Install Istio CNI via Istioctl including the --set values.cni.cniBinDir=/home/kubernetes/bin option. For example, the following istioctl manifest command sets the values.cni.cniBinDir value for a GKE cluster:

    1. $ istioctl manifest apply --set values.cni.cniBinDir=/home/kubernetes/bin \
    2. --set components.cni.enabled=true \
    3. --set components.cni.namespace=kube-system

Sidecar injection compatibility

The use of the Istio CNI plugin requires Kubernetes pods to be deployed with a sidecar injection method that uses the istio-sidecar-injector configmap created from the installation with the --set cni.enabled=true option. Refer to Istio sidecar injection for details about Istio sidecar injection methods.

The following sidecar injection methods are supported for use with the Istio CNI plugin:

  1. Automatic sidecar injection
  2. Manual sidecar injection with the istio-sidecar-injector configmap

    1. istioctl kube-inject using the configmap directly:

      1. $ istioctl kube-inject -f deployment.yaml -o deployment-injected.yaml --injectConfigMapName istio-sidecar-injector
      2. $ kubectl apply -f deployment-injected.yaml
    2. istioctl kube-inject using a file created from the configmap:

      1. $ kubectl -n istio-system get configmap istio-sidecar-injector -o=jsonpath='{.data.config}' > inject-config.yaml
      2. $ istioctl kube-inject -f deployment.yaml -o deployment-injected.yaml --injectConfigFile inject-config.yaml
      3. $ kubectl apply -f deployment-injected.yaml

Operational details

The Istio CNI plugin handles Kubernetes pod create and delete events and does the following:

  1. Identify Istio user application pods with Istio sidecars requiring traffic redirection
  2. Perform pod network namespace configuration to redirect traffic to/from the Istio sidecar

Identifying pods requiring traffic redirection

The Istio CNI plugin identifies pods requiring traffic redirection to/from the accompanying Istio proxy sidecar by checking that the pod meets all of the following conditions:

  1. The pod is NOT in a Kubernetes namespace in the configured exclude_namespaces list.
  2. The pod has a container named istio-proxy.
  3. The pod has more than 1 container.
  4. The pod has no annotation with key sidecar.istio.io/inject OR the value of the annotation is true.

Traffic redirection parameters

To redirect traffic in the application pod’s network namespace to/from the Istio proxy sidecar, the Istio CNI plugin configures the namespace’s iptables. The following table describes the parameters to the redirect functionality. To override the default values for the parameters, set the corresponding application pod annotation key.

Annotation KeyValuesDefaultDescription
sidecar.istio.io/injecttrue, falsetrueIndicates whether the Istio proxy sidecar should be injected. If present and false, the Istio CNI plugin doesn’t configure the namespace’s iptables for the pod.
sidecar.istio.io/statusAnnotation created by Istio’s sidecar injection. If missing, the Istio CNI plugin doesn’t configure the pod namespace’s iptables.
sidecar.istio.io/interceptionModeREDIRECT, TPROXYREDIRECTThe iptables redirect mode to use.
traffic.sidecar.istio.io/includeOutboundIPRanges<IPCidr1>,<IPCidr2>,…Comma separated list of IP ranges in CIDR form to redirect to the sidecar proxy. The default value of ““ redirects all traffic.
traffic.sidecar.istio.io/excludeOutboundIPRanges<IPCidr1>,<IPCidr2>,…Comma separated list of IP ranges in CIDR form to be excluded from redirection. Only applies when includeOutboundIPRanges is .
traffic.sidecar.istio.io/includeInboundPorts<port1>,<port2>,…Pod’s list of containerPortsComma separated list of inbound ports for which traffic is to be redirected to the Istio proxy sidecar. The value of ““ redirects all ports.
traffic.sidecar.istio.io/excludeInboundPorts<port1>,<port2>,…Comma separated list of inbound ports to be excluded from redirection to the Istio sidecar proxy. Only valid when includeInboundPorts is “*”.
traffic.sidecar.istio.io/excludeOutboundPorts<port1>,<port2>,…Comma separated list of outbound ports to be excluded from redirection to Envoy.
traffic.sidecar.istio.io/kubevirtInterfaces<ethX>,<ethY>,…Comma separated list of virtual interfaces whose inbound traffic (from VM) will be treated as outbound.

Logging

The Istio CNI plugin runs in the container runtime process space. Due to this, the kubelet process writes the plugin’s log entries into its log.

Compatibility with application init containers

The Istio CNI plugin may cause networking connectivity problems for any application initContainers. When using Istio CNI, kubelet starts an injected pod with the following steps:

  1. The Istio CNI plugin sets up traffic redirection to the Istio sidecar proxy within the pod.
  2. All init containers execute and complete successfully.
  3. The Istio sidecar proxy starts in the pod along with the pod’s other containers.

Init containers execute before the sidecar proxy starts, which can result in traffic loss during their execution. Avoid this traffic loss with one or both of the following settings:

  • Set the traffic.sidecar.istio.io/excludeOutboundIPRanges annotation to disable redirecting traffic to any CIDRs the init containers communicate with.
  • Set the traffic.sidecar.istio.io/excludeOutboundPorts annotation to disable redirecting traffic to the specific outbound ports the init containers use.

Compatibility with other CNI plugins

The Istio CNI plugin maintains compatibility with the same set of CNI plugins as the current istio-init container which requires the NET_ADMIN and NET_RAW capabilities.

The Istio CNI plugin operates as a chained CNI plugin. This means its configuration is added to the existing CNI plugins configuration as a new configuration list element. See the CNI specification reference for further details. When a pod is created or deleted, the container runtime invokes each plugin in the list in order. The Istio CNI plugin only performs actions to setup the application pod’s traffic redirection to the injected Istio proxy sidecar (using iptables in the pod’s network namespace).

The Istio CNI plugin should not interfere with the operations of the base CNI plugin that configures the pod’s networking setup, although not all CNI plugins have been validated.

See also

Installing the Sidecar

Install the Istio sidecar in application pods automatically using the sidecar injector webhook or manually using istioctl CLI.

Pods and Services

Prepare your Kubernetes pods and services to run in an Istio-enabled cluster.

Provision a certificate and key for an application without sidecars

A mechanism to acquire and share an application certificate and key through mounted files.

DNS Certificate Management

Provision and manage DNS certificates in Istio.

Secure Webhook Management

A more secure way to manage Istio webhooks.

Demystifying Istio’s Sidecar Injection Model

De-mystify how Istio manages to plugin its data-plane components into an existing deployment.