New Record State Extraction

Change event structure

Debezium generates data change events that have a complex structure. Each event consists of three parts:

  • Metadata, which includes but is not limited to:

    • The type of operation that changed the data.

    • Source information, such as the names of the database and the table in which the change occurred.

    • Timestamp that identifies when the change was made.

    • Optional transaction information.

  • Row data before the change

  • Row data after the change

The following example shows part of the message structure for an UPDATE change event:

  1. {
  2. "op": "u",
  3. "source": {
  4. ...
  5. },
  6. "ts_ms" : "...",
  7. "ts_us" : "...",
  8. "ts_ns" : "...",
  9. "before" : {
  10. "field1" : "oldvalue1",
  11. "field2" : "oldvalue2"
  12. },
  13. "after" : {
  14. "field1" : "newvalue1",
  15. "field2" : "newvalue2"
  16. }
  17. }

For more information about the change event structure for a connector, see the documentation for the connector.

After the event flattening SMT processes the message in the previous example, it simplifies the message format, resulting in the message in the following example:

  1. {
  2. "field1" : "newvalue1",
  3. "field2" : "newvalue2"
  4. }

Behavior

The event flattening SMT extracts the after field from a Debezium change event in a Kafka record. The SMT replaces the original change event with only its after field to create a simple Kafka record.

You can configure the event flattening SMT for a Debezium connector or for a sink connector that consumes messages emitted by a Debezium connector. The advantage of configuring event flattening for a sink connector is that records stored in Apache Kafka contain whole Debezium change events. The decision to apply the SMT to a source or sink connector depends on your particular use case.

You can configure the transformation to do any of the following:

  • Add metadata from the change event to the simplified Kafka record. The default behavior is that the SMT does not add metadata.

  • Keep Kafka records that contain change events for DELETE operations in the stream. The default behavior is that the SMT drops Kafka records for DELETE operation change events because most consumers cannot yet handle them.

A database DELETE operation causes Debezium to generate two Kafka records:

  • A record that contains "op": "d", the before row data, and some other fields.

  • A tombstone record that has the same key as the deleted row and a value of null. This record is a marker for Apache Kafka. It indicates that log compaction can remove all records that have this key.

Instead of dropping the record that contains the before row data, you can configure the event flattening SMT to do one of the following:

  • Keep the record in the stream and edit it to have only the "value": "null" field.

  • Keep the record in the stream and edit it to have a value field that contains the key/value pairs that were in the before field with an added "__deleted": "true" entry.

Similarly, instead of dropping the tombstone record, you can configure the event flattening SMT to keep the tombstone record in the stream.

Configuration

Configure the Debezium event flattening SMT in a Kafka Connect source or sink connector by adding the SMT configuration details to your connector’s configuration. For example, to obtain the default behavior of the transformation, add it to the connector configuration without specifying any options, as in the following example:

  1. transforms=unwrap,...
  2. transforms.unwrap.type=io.debezium.transforms.ExtractNewRecordState

As with any Kafka Connect connector configuration, you can set transforms= to multiple, comma-separated, SMT aliases in the order in which you want Kafka Connect to apply the SMTs.

The following .properties example sets several event flattening SMT options:

  1. transforms=unwrap,...
  2. transforms.unwrap.type=io.debezium.transforms.ExtractNewRecordState
  3. transforms.unwrap.drop.tombstones=false
  4. transforms.unwrap.delete.handling.mode=rewrite
  5. transforms.unwrap.add.fields=table,lsn

drop.tombstones=false

Keeps tombstone records for DELETE operations in the event stream.

delete.handling.mode=rewrite

For DELETE operations, edits the Kafka record by flattening the value field that was in the change event. The value field directly contains the key/value pairs that were in the before field. The SMT adds __deleted and sets it to true, for example:

  1. "value": {
  2. "pk": 2,
  3. "cola": null,
  4. "__deleted": "true"
  5. }

add.fields=table,lsn

Adds change event metadata for the table and lsn fields to the simplified Kafka record.

Customizing the configuration

The connector might emit many types of event messages (heartbeat messages, tombstone messages, or metadata messages about transactions or schema changes). To apply the transformation to a subset of events, you can define an SMT predicate statement that selectively applies the transformation to specific events only.

Adding metadata

You can configure the event flattening SMT to add original change event metadata to the simplified Kafka record. For example, you might want the simplified record’s header or value to contain any of the following:

  • The type of operation that made the change

  • The name of the database or table that was changed

  • Connector-specific fields such as the Postgres LSN field

For more information on what is available see the documentation for each connector.

To add metadata to the simplified Kafka record’s header, specify the add.headers option. To add metadata to the simplified Kafka record’s value, specify the add.fields option. Each of these options takes a comma separated list of change event field names. Do not specify spaces. When there are duplicate field names, to add metadata for one of those fields, specify the struct as well as the field. For example:

  1. transforms=unwrap,...
  2. transforms.unwrap.type=io.debezium.transforms.ExtractNewRecordState
  3. transforms.unwrap.add.fields=op,table,lsn,source.ts_ms
  4. transforms.unwrap.add.headers=db
  5. transforms.unwrap.delete.handling.mode=rewrite

With that configuration, a simplified Kafka record would contain something like the following:

  1. {
  2. ...
  3. "__op" : "c",
  4. "__table": "MY_TABLE",
  5. "__lsn": "123456789",
  6. "__source_ts_ms" : "123456789",
  7. ...
  8. }

Also, simplified Kafka records would have a __db header.

In the simplified Kafka record, the SMT prefixes the metadata field names with a double underscore. When you specify a struct, the SMT also inserts an underscore between the struct name and the field name.

To add metadata to a simplified Kafka record that is for a DELETE operation, you must also configure delete.handling.mode=rewrite.

Options for applying the event-flattening transformation selectively

In addition to the change event messages that a Debezium connector emits when a database change occurs, the connector also emits other types of messages, including heartbeat messages, and metadata messages about schema changes and transactions. Because the structure of these other messages differs from the structure of the change event messages that the SMT is designed to process, it’s best to configure the connector to selectively apply the SMT, so that it processes only the intended data change messages.

For more information about how to apply the SMT selectively, see Configure an SMT predicate for the transformation.

Configuration options

The following table describes the options that you can specify to configure the event flattening SMT.

Table 1. Descriptions of event flattening SMT configuration options
OptionDefaultDescription

true

Debezium generates a tombstone record for each DELETE operation. The default behavior is that event flattening SMT removes tombstone records from the stream. To keep tombstone records in the stream, specify drop.tombstones=false.

This option is scheduled for removal in a future release. In its place, use the delete.tombstone.handling.mode option.

drop

Debezium generates a change event record for each DELETE operation. The default behavior is that event flattening SMT removes these records from the stream. To keep Kafka records for DELETE operations in the stream, set delete.handling.mode to none or rewrite.

Specify none to keep the change event record in the stream. The record contains only “value”: “null”.

Specify rewrite to keep the change event record in the stream and edit the record to have a value field that contains the key/value pairs that were in the before field and also add deleted: true to the value. This is another way to indicate that the record has been deleted.

When you specify rewrite, the updated simplified records for DELETE operations might be all you need to track deleted records. You can consider accepting the default behavior of dropping the tombstone records that the Debezium connector creates.

This option is scheduled for removal in a future release. In its place, use the delete.tombstone.handling.mode option.

No default

Debezium generates a change event record for each DELETE operation. This setting determines how the event flattening SMT handles DELETE events from the stream.

The setting for this option takes precedence over any conflicting settings that you might configure for the deprecated drop.tombstones or delete.handling.mode options.

Set one of the following options:

    drop

    The SMT removes both the DELETE event and TOMBSTONE from the stream.

    tombstone (default)

    The SMT retains TOMBSTONE records in the stream. The TOMBSTONE record contains only the following value: “value”: “null”.

    rewrite

    The SMT retains the change event record in the stream and makes the following changes:

    • Adds a value field to the record that contains the key/value pairs from the before field of the original record.

    • Adds deleted: true to the value of the record.

    • Removes TOMBSTONE records.

      This setting provides another way to indicate that the record has been deleted.

    rewrite-with-tombstone

    The SMT behaves as it does when you select the rewrite option, except that it also retains TOMBSTONE records.

To use row data to determine the topic to route the record to, set this option to an after field attribute. The SMT routes the record to the topic whose name matches the value of the specified after field attribute. For a DELETE operation, set this option to a before field attribute.

For example, configuration of route.by.field=destination routes records to the topic whose name is the value of after.destination. The default behavior is that a Debezium connector sends each change event record to a topic whose name is formed from the name of the database and the name of the table in which the change was made.

If you are configuring the event flattening SMT on a sink connector, setting this option might be useful when the destination topic name dictates the name of the database table that will be updated with the simplified change event record. If the topic name is not correct for your use case, you can configure route.by.field to re-route the event.

(double-underscore)

Set this optional string to prefix a field.

Set this option to a comma-separated list, with no spaces, of metadata fields to add to the simplified Kafka record’s value. When there are duplicate field names, to add metadata for one of those fields, specify the struct as well as the field, for example source.ts_ms.

Optionally, you can override the field name via <field name>:<new field name>, e.g. like so: new field name like version:VERSION, connector:CONNECTOR, source.ts_ms:EVENT_TIMESTAMP. Please note that the new field name is case-sensitive.

When the SMT adds metadata fields to the simplified record’s value, it prefixes each metadata field name with a double underscore. For a struct specification, the SMT also inserts an underscore between the struct name and the field name.

If you specify a field that is not in the change event record, the SMT still adds the field to the record’s value.

(double-underscore)

Set this optional string to prefix a header.

Set this option to a comma-separated list, with no spaces, of metadata fields to add to the header of the simplified Kafka record. When there are duplicate field names, to add metadata for one of those fields, specify the struct as well as the field, for example source.ts_ms.

Optionally, you can override the field name via <field name>:<new field name>, e.g. like so: new field name like version:VERSION, connector:CONNECTOR, source.ts_ms:EVENT_TIMESTAMP. Please note that the new field name is case-sensitive.

When the SMT adds metadata fields to the simplified record’s header, it prefixes each metadata field name with a double underscore. For a struct specification, the SMT also inserts an underscore between the struct name and the field name.

If you specify a field that is not in the change event record, the SMT does not add the field to the header.

The Kafka message header name to use for listing field names in the source message that you want to drop from the output message.

false

Specifies whether you want the SMT to remove fields that are listed in drop.fields.header.name from the event’s key.

true

Specifies whether you want the SMT to remove non-optional fields that are included in the drop.fields.header.name configuration property.

By default, the SMT only removes fields that are marked optional.