背景

早期RocksDB TransactionDB将事务的更新操作都缓存在WriteBatch中,事务提交时才写WAL和memtable。RocksDB支持二阶段提交(2PC)后,在prepare阶段写WAL, WriteBatch写memtable依然在commit阶段。这种方式的优点是,事务隔离性比较好,当前事务看不见其它事务的未提交数据, 事务的可见性仅通过sequence大小即可判断,参考这里 , 另外事务回滚也比较简单,只需要释放WriteBatch即可。

但同时也存在以下缺点

  • 事务提交操作比较重,延迟较大
  • 事务都缓存在WriteBatch中,对大事务不友好
  • 无法支持read uncommitted隔离级别

Write Policy

针对TransactionDB的以上缺点, rocksdb引入了新的提交策略(write policy), 共有以下write policy

  • WriteCommitted

    即原有的方式,提交时才会写WriteBatch, 默认为WRITE_COMMITTED方式.

  • WritePrepared
    将写memtable提前到prepare阶段。
    prepare阶段写WAL, 并且写memtable
    commit阶段写commit标记到WAL。 WritePrepared方式减轻了提交的操作,但并不能解大事务的问题。

  • WriteUnPrepared
    将写memtable提前到每次写操作。 目前此方式还在开发中。 WritePrepared方式减轻了提交的操作,同时也能解大事务的问题。

本文主要介绍WritePrepared的实现方式。

WritePrepared问题

WritePrepared方式将写memtable提前到prepare阶段,会引入以下问题

  • 写入memtable的记录如何判断可见性
    WritePrepared方式记录中的sequence是在prepare阶段就分配的,对于某个snapshot来说,snapshot大于此sequence并不代表此记录对snapshot可见。

  • 如何回滚memtable中的记录
    不像WriteCommitted方式直接释放WriteBatch就可以回滚事务,WritePrepared方式回滚时memtable中的记录需要以一定的方式回滚

WritePrepared方式在prepare阶段写memtable时会分配sequece, 设为prepare_seq, prepare_seq会存储到记录上。同时提交时会记录一个sequence, 设为commit_seq,commit_seq并不存在记录上,通过commit_seq可判断记录可见性。

snapshot > commit_seq, 此记录可见

这里就存在矛盾了,能判断记录可见性的commit_seq并不存储在记录上

事务可见性分析

对于下图中,设记录的key是唯一的,对于snapshot=8来说,R1, R2两个记录是可见的,因为R1,R2的commit_seq都小于8。而R3,R4,R5的commit_seq都大于8,所以R3,R4,R5是不可见的。

image.png

在分析WritePrepared事务可见性实现之前,我们先来看看可见性最简单的实现方式

第一种方式

每个事务开始时, 获取当前已经开启但未提交的事务列表,称之为read_view. 在rocksdb中read_view为prepare_seq的集合, 其中min_seq 为read_view中的最小sequence, max_seq为readview中的最大sequence.

对于snapshot=S事务可见性规则如下:

  1. prepare_seq < min_seq, 事务在S前已提交,可见。例如上例R1
  2. prepare_seq > max_seq, 事务在S后开启,不可见。例如上例R5
  3. prepare_seq exist in read_view, 对于S来说,事务已经开启,但未提交,不可见。例如上例R3R4
  4. 其它情况,可见。例如上例R2

上例中read_view = {4,5}, min_seq=4, max_seq=5

这种方式不需要commit_seq. 但每个事务都需要维护read_view.

innodb 的可见性就是通过此规则来实现的

第二种方式

commit_seq并没有存储在记录中,我们可以在内存中维护commit_seq信息,假设我们将每个已经提交的事务信息对(prepare_seq,commit_seq)都存储起来称为commit_cache

对于snapshot=S事务可见性规则如下

  1. prepare_seq > S 不可见,例如上例R5
  2. prepare_seq exist in commit_cache, 通过对应的commit_seq判断是否可见, 例如上例R1,R2的commit_seq <= S 可见,而R3,R4,R5的commit_seq > S 不可见。
  3. prepare_seq not exist in commit_cache, 未提交事务,不可见。

上例中commit_cache = {<1,2>, <4,9>,<5,10>,<6,7>, <11,12> }

这种方式简单,但需要存储所有已提交的信息,不太可行。

WritePrepared 可见性实现分析

rocksdb WritePrepared的实现折中了以上两种方式。先介绍WritePrepared引入的一些数据结构

  • commit_cache
    commit_cache保存所有的已经提交的事务信息对, 但commit_cache会以CommitCache[prepare_seq % array_size] = 方式淘汰, prepared_seq是递增的,所以commit_cache的淘汰大体上是先进先出的, 这样commit_cache基本上保存的是最近提交的事务信息。

其中max_evicted_seq_记录淘汰出的最大的prepare_seq。

  • prepared_txns_
    prepared_txns_是一个最小堆,保存当前prepare但未提交的事务。prepared_txns_在prepare时加入prepare_seq,在commit时踢除.

  • delayed_prepared_
    delayed_prepared_保存的是未提交事务。 Commitcache发生evict时, AdvanceMaxEvictedSeq推进max_evicted_seq_,prepared_txns_中小于max_evicted_seq_都踢除,并加入到delayed_prepared_. delayed_prepared_在commit时也会踢除, 小于max_evicted_seq_的未提交事务都在delayed_prepared_中

prepared_txns_和delayed_prepared_都是prepare的但没有commit的事务 也就是说当前prepare的但没有commit的,要么在prepared_txns_中要么在delayed_prepared_中

  • min_uncommitted_
    min_uncommitted_事务开启快照时获取的最小未提交事务即prepared_txns_.top

  • old_commit_map_
    old_commit_map_存储snapshot对应的未提交事务列表. Commitcache发生evict时[pre_seq,commit], 存在某个snapshot, 如果满足prepare_seq < snapshot < commit_seq, 这个prepare_seq会加入old_commit_map_. 也就是说old_commit_map_只存储哪些被evict的事务,对应某些snapshot来说是不可见的。 事务提交ReleaseSnapshotInternal时从old_commit_map_移除

image.png

事务可见性判断以max_evicted_seq_为界, prepare_seq小于等于max_evicted_seq_时按第一种方式处理, prepare_seq大于max_evicted_seq_时按第二种方式处理。

image.png

  • prepare_seq大于max_evicted_seq_

直接应用第二种方式的规则

  1. prepare_seq > S 不可见
  2. prepare_seq exist in commit_cache,通过对应的commit_seq判断是否可见
  3. prepare_seq not exist in commit_cache, 未提交事务,不可见
  • prepare_seq小于等于max_evicted_seq_

基本上对应于第一种方式的规则

  1. prepare_seq exist in delayed_prepared_, 事务未提交,不可见
  2. prepare_seq < min_uncommitted_, 事务在S前已提交,可见。
  3. snapshot > max_evicted_seq, 事务在S前已提交,可见。
  4. prepare_seq exist in old_commit_map_, 对于S来说,事务已经开启,但未提交,不可见。
  5. 其它情况,可见。

WritePrepared 可见性判断还是比较高效的 prepare_seq大于max_evicted_seq_时可以通过commit_cache快速判断

prepare_seq小于max_evicted_seq_时又分为以下几种情况 prepare_seq < min_uncommitted可以快速判断可见 min_uncommitted 和max_evicted_seq_之间, 未提交的在delayed_prepared_不可见,提交的有一部分在commit_cache,前面已判断。 > 另一部分提交的已evict掉,通过Snapshot > max_evicted_seq_ 可以快速判断可见。 最后的就通过old_commit_map_来判断prepare_seq是否在某个live snapshot中

这种方式对长事务不友好,如果有一个很老的事务未提交,那么min_uncommitted 和max_evicted_seq_之前的区间会比较大,判断就比较低效

如果commit_cache比较大_(默认8M个entry), 且都是短事务的场景,这样基本可以保证新开启事务的Snapshot > max_evicted_seq, 有这个条件就不需要去判断old_commit_map_。

举个例子

image.png

源码逻辑如下:

  1. inline bool IsInSnapshot(uint64_t prep_seq, uint64_t snapshot_seq,
  2. uint64_t min_uncommitted = 0) const {
  3. ROCKS_LOG_DETAILS(info_log_,
  4. "IsInSnapshot %" PRIu64 " in %" PRIu64
  5. " min_uncommitted %" PRIu64,
  6. prep_seq, snapshot_seq, min_uncommitted);
  7. // Here we try to infer the return value without looking into prepare list.
  8. // This would help avoiding synchronization over a shared map.
  9. // TODO(myabandeh): optimize this. This sequence of checks must be correct
  10. // but not necessary efficient
  11. if (prep_seq == 0) {
  12. // Compaction will output keys to bottom-level with sequence number 0 if
  13. // it is visible to the earliest snapshot.
  14. ROCKS_LOG_DETAILS(
  15. info_log_, "IsInSnapshot %" PRIu64 " in %" PRIu64 " returns %" PRId32,
  16. prep_seq, snapshot_seq, 1);
  17. return true;
  18. }
  19. if (snapshot_seq < prep_seq) {
  20. // snapshot_seq < prep_seq <= commit_seq => snapshot_seq < commit_seq
  21. ROCKS_LOG_DETAILS(
  22. info_log_, "IsInSnapshot %" PRIu64 " in %" PRIu64 " returns %" PRId32,
  23. prep_seq, snapshot_seq, 0);
  24. return false;
  25. }
  26. if (!delayed_prepared_empty_.load(std::memory_order_acquire)) {
  27. // We should not normally reach here
  28. WPRecordTick(TXN_PREPARE_MUTEX_OVERHEAD);
  29. ReadLock rl(&prepared_mutex_);
  30. ROCKS_LOG_WARN(info_log_, "prepared_mutex_ overhead %" PRIu64,
  31. static_cast<uint64_t>(delayed_prepared_.size()));
  32. if (delayed_prepared_.find(prep_seq) != delayed_prepared_.end()) {
  33. // Then it is not committed yet
  34. ROCKS_LOG_DETAILS(info_log_,
  35. "IsInSnapshot %" PRIu64 " in %" PRIu64
  36. " returns %" PRId32,
  37. prep_seq, snapshot_seq, 0);
  38. return false;
  39. }
  40. }
  41. // Note: since min_uncommitted does not include the delayed_prepared_ we
  42. // should check delayed_prepared_ first before applying this optimization.
  43. // TODO(myabandeh): include delayed_prepared_ in min_uncommitted
  44. if (prep_seq < min_uncommitted) {
  45. ROCKS_LOG_DETAILS(info_log_,
  46. "IsInSnapshot %" PRIu64 " in %" PRIu64
  47. " returns %" PRId32
  48. " because of min_uncommitted %" PRIu64,
  49. prep_seq, snapshot_seq, 1, min_uncommitted);
  50. return true;
  51. }
  52. auto indexed_seq = prep_seq % COMMIT_CACHE_SIZE;
  53. CommitEntry64b dont_care;
  54. CommitEntry cached;
  55. bool exist = GetCommitEntry(indexed_seq, &dont_care, &cached);
  56. if (exist && prep_seq == cached.prep_seq) {
  57. // It is committed and also not evicted from commit cache
  58. ROCKS_LOG_DETAILS(
  59. info_log_, "IsInSnapshot %" PRIu64 " in %" PRIu64 " returns %" PRId32,
  60. prep_seq, snapshot_seq, cached.commit_seq <= snapshot_seq);
  61. return cached.commit_seq <= snapshot_seq;
  62. }
  63. // else it could be committed but not inserted in the map which could happen
  64. // after recovery, or it could be committed and evicted by another commit,
  65. // or never committed.
  66. // At this point we dont know if it was committed or it is still prepared
  67. auto max_evicted_seq = max_evicted_seq_.load(std::memory_order_acquire);
  68. // max_evicted_seq_ when we did GetCommitEntry <= max_evicted_seq now
  69. if (max_evicted_seq < prep_seq) {
  70. // Not evicted from cache and also not present, so must be still prepared
  71. ROCKS_LOG_DETAILS(
  72. info_log_, "IsInSnapshot %" PRIu64 " in %" PRIu64 " returns %" PRId32,
  73. prep_seq, snapshot_seq, 0);
  74. return false;
  75. }
  76. // When advancing max_evicted_seq_, we move older entires from prepared to
  77. // delayed_prepared_. Also we move evicted entries from commit cache to
  78. // old_commit_map_ if it overlaps with any snapshot. Since prep_seq <=
  79. // max_evicted_seq_, we have three cases: i) in delayed_prepared_, ii) in
  80. // old_commit_map_, iii) committed with no conflict with any snapshot. Case
  81. // (i) delayed_prepared_ is checked above
  82. if (max_evicted_seq < snapshot_seq) { // then (ii) cannot be the case
  83. // only (iii) is the case: committed
  84. // commit_seq <= max_evicted_seq_ < snapshot_seq => commit_seq <
  85. // snapshot_seq
  86. ROCKS_LOG_DETAILS(
  87. info_log_, "IsInSnapshot %" PRIu64 " in %" PRIu64 " returns %" PRId32,
  88. prep_seq, snapshot_seq, 1);
  89. return true;
  90. }
  91. // else (ii) might be the case: check the commit data saved for this
  92. // snapshot. If there was no overlapping commit entry, then it is committed
  93. // with a commit_seq lower than any live snapshot, including snapshot_seq.
  94. if (old_commit_map_empty_.load(std::memory_order_acquire)) {
  95. ROCKS_LOG_DETAILS(
  96. info_log_, "IsInSnapshot %" PRIu64 " in %" PRIu64 " returns %" PRId32,
  97. prep_seq, snapshot_seq, 1);
  98. return true;
  99. }
  100. {
  101. // We should not normally reach here unless sapshot_seq is old. This is a
  102. // rare case and it is ok to pay the cost of mutex ReadLock for such old,
  103. // reading transactions.
  104. WPRecordTick(TXN_OLD_COMMIT_MAP_MUTEX_OVERHEAD);
  105. ROCKS_LOG_WARN(info_log_, "old_commit_map_mutex_ overhead");
  106. ReadLock rl(&old_commit_map_mutex_);
  107. auto prep_set_entry = old_commit_map_.find(snapshot_seq);
  108. bool found = prep_set_entry != old_commit_map_.end();
  109. if (found) {
  110. auto& vec = prep_set_entry->second;
  111. found = std::binary_search(vec.begin(), vec.end(), prep_seq);
  112. }
  113. if (!found) {
  114. ROCKS_LOG_DETAILS(info_log_,
  115. "IsInSnapshot %" PRIu64 " in %" PRIu64
  116. " returns %" PRId32,
  117. prep_seq, snapshot_seq, 1);
  118. return true;
  119. }
  120. }
  121. // (ii) it the case: it is committed but after the snapshot_seq
  122. ROCKS_LOG_DETAILS(
  123. info_log_, "IsInSnapshot %" PRIu64 " in %" PRIu64 " returns %" PRId32,
  124. prep_seq, snapshot_seq, 0);
  125. return false;
  126. }

事务可见性的判断会用到数据的读取和compaction过程中的数据是否存在live snapshot上面。

WritePrepared 回滚处理

以prepare_seq-1为snapshot开启事务,如果查找不到,说明之前是第一次插入key, 则通过Delete回滚。如果存在老值,则用老值覆盖来回滚。

源码片段如下

  1. s = db_->GetImpl(roptions, cf_handle, key, &pinnable_val, &not_used,
  2. &callback);
  3. assert(s.ok() || s.IsNotFound());
  4. if (s.ok()) {
  5. s = rollback_batch_->Put(cf_handle, key, pinnable_val);
  6. assert(s.ok());
  7. } else if (s.IsNotFound()) {
  8. // There has been no readable value before txn. By adding a delete we
  9. // make sure that there will be none afterwards either.
  10. s = rollback_batch_->Delete(cf_handle, key);
  11. assert(s.ok());
  12. } else {
  13. // Unexpected status. Return it to the user.
  14. }

总结

WritePrepare方式减轻了事务提交的负担,但对事务可见性的处理也引入了复杂性,同时回滚动作的开销也比较大。rocksdb对事务可见性的判断也做了很多优化,比如使用了很多lock-free算法等。而对于MySQL 2pc来说回滚并不多,一般发生在crash recover的时候,因此,回滚的开销也不用太在意。