Optimization using batching

简介

Game engines have to send a set of instructions to the GPU to tell the GPU what and where to draw. These instructions are sent using common instructions called APIs. Examples of graphics APIs are OpenGL, OpenGL ES, and Vulkan.

Different APIs incur different costs when drawing objects. OpenGL handles a lot of work for the user in the GPU driver at the cost of more expensive draw calls. As a result, applications can often be sped up by reducing the number of draw calls.

注解

2D batching is currently only supported when using the GLES2 renderer.

Draw calls

In 2D, we need to tell the GPU to render a series of primitives (rectangles, lines, polygons etc). The most obvious technique is to tell the GPU to render one primitive at a time, telling it some information such as the texture used, the material, the position, size, etc. then saying “Draw!” (this is called a draw call).

While this is conceptually simple from the engine side, GPUs operate very slowly when used in this manner. GPUs work much more efficiently if you tell them to draw a number of similar primitives all in one draw call, which we will call a “batch”.

It turns out that they don’t just work a bit faster when used in this manner; they work a lot faster.

As Godot is designed to be a general-purpose engine, the primitives coming into the Godot renderer can be in any order, sometimes similar, and sometimes dissimilar. To match Godot’s general-purpose nature with the batching preferences of GPUs, Godot features an intermediate layer which can automatically group together primitives wherever possible and send these batches on to the GPU. This can give an increase in rendering performance while requiring few (if any) changes to your Godot project.

它的运作方式

Instructions come into the renderer from your game in the form of a series of items, each of which can contain one or more commands. The items correspond to Nodes in the scene tree, and the commands correspond to primitives such as rectangles or polygons. Some items such as TileMaps and text can contain a large number of commands (tiles and glyphs respectively). Others, such as sprites, may only contain a single command (a rectangle).

The batcher uses two main techniques to group together primitives:

• Consecutive items can be joined together.
• Consecutive commands within an item can be joined to form a batch.

Breaking batching

Batching can only take place if the items or commands are similar enough to be rendered in one draw call. Certain changes (or techniques), by necessity, prevent the formation of a contiguous batch, this is referred to as “breaking batching”.

Batching will be broken by (amongst other things):

• 纹理的变化。
• 材质的变化。
• Change of primitive type (say, going from rectangles to lines).

注解

For example, if you draw a series of sprites each with a different texture, there is no way they can be batched.

Determining the rendering order

The question arises, if only similar items can be drawn together in a batch, why don’t we look through all the items in a scene, group together all the similar items, and draw them together?

In 3D, this is often exactly how engines work. However, in Godot’s 2D renderer, items are drawn in “painter’s order”, from back to front. This ensures that items at the front are drawn on top of earlier items when they overlap.

This also means that if we try and draw objects on a per-texture basis, then this painter’s order may break and objects will be drawn in the wrong order.

In Godot, this back-to-front order is determined by:

• The order of objects in the scene tree.
• 对象的Z索引。
• Canvas Layers(画布层)。
• YSort 节点。

注解

You can group similar objects together for easier batching. While doing so is not a requirement on your part, think of it as an optional approach that can improve performance in some cases. See the Diagnostics section to help you make this decision.

A trick

And now, a sleight of hand. Even though the idea of painter’s order is that objects are rendered from back to front, consider 3 objects A, B and C, that contain 2 different textures: grass and wood.

In painter’s order they are ordered:

A - wood
B - grass
C - wood

Because of the texture changes, they can’t be batched and will be rendered in 3 draw calls.

However, painter’s order is only needed on the assumption that they will be drawn on top of each other. If we relax that assumption, i.e. if none of these 3 objects are overlapping, there is no need to preserve painter’s order. The rendered result will be the same. What if we could take advantage of this?

Item reordering

It turns out that we can reorder items. However, we can only do this if the items satisfy the conditions of an overlap test, to ensure that the end result will be the same as if they were not reordered. The overlap test is very cheap in performance terms, but not absolutely free, so there is a slight cost to looking ahead to decide whether items can be reordered. The number of items to lookahead for reordering can be set in project settings (see below), in order to balance the costs and benefits in your project.

A - wood
C - wood
B - grass

Since the texture only changes once, we can render the above in only 2 draw calls.

灯光

Although the batching system’s job is normally quite straightforward, it becomes considerably more complex when 2D lights are used. This is because lights are drawn using additional passes, one for each light affecting the primitive. Consider 2 sprites A and B, with identical texture and material. Without lights, they would be batched together and drawn in one draw call. But with 3 lights, they would be drawn as follows, each line being a draw call:

A
A - light 1
A - light 2
A - light 3
B
B - light 1
B - light 2
B - light 3

That is a lot of draw calls: 8 for only 2 sprites. Now, consider we are drawing 1,000 sprites. The number of draw calls quickly becomes astronomical and performance suffers. This is partly why lights have the potential to drastically slow down 2D rendering.

However, if you remember our magician’s trick from item reordering, it turns out we can use the same trick to get around painter’s order for lights!

If A and B are not overlapping, we can render them together in a batch, so the drawing process is as follows:

AB
AB - light 1
AB - light 2
AB - light 3

That is only 4 draw calls. Not bad, as that is a 2× reduction. However, consider that in a real game, you might be drawing closer to 1,000 sprites.

• Before: 1000 × 4 = 4,000 draw calls.
• After: 1 × 4 = 4 draw calls.

That is a 1000× decrease in draw calls, and should give a huge increase in performance.

Overlap test

However, as with the item reordering, things are not that simple. We must first perform the overlap test to determine whether we can join these primitives. This overlap test has a small cost. Again, you can choose the number of primitives to lookahead in the overlap test to balance the benefits against the cost. With lights, the benefits usually far outweigh the costs.

Also consider that depending on the arrangement of primitives in the viewport, the overlap test will sometimes fail (because the primitives overlap and therefore shouldn’t be joined). In practice, the decrease in draw calls may be less dramatic than in a perfect situation with no overlapping at all. However, performance is usually far higher than without this lighting optimization.

Light scissoring

Batching can make it more difficult to cull out objects that are not affected or partially affected by a light. This can increase the fill rate requirements quite a bit and slow down rendering. Fill rate is the rate at which pixels are colored. It is another potential bottleneck unrelated to draw calls.

In order to counter this problem (and speed up lighting in general), batching introduces light scissoring. This enables the use of the OpenGL command glScissor(), which identifies an area outside of which the GPU won’t render any pixels. We can greatly optimize fill rate by identifying the intersection area between a light and a primitive, and limit rendering the light to that area only.

Light scissoring is controlled with the scissor_area_threshold project setting. This value is between 1.0 and 0.0, with 1.0 being off (no scissoring), and 0.0 being scissoring in every circumstance. The reason for the setting is that there may be some small cost to scissoring on some hardware. That said, scissoring should usually result in performance gains when you’re using 2D lighting.

The relationship between the threshold and whether a scissor operation takes place is not always straightforward. Generally, it represents the pixel area that is potentially “saved” by a scissor operation (i.e. the fill rate saved). At 1.0, the entire screen’s pixels would need to be saved, which rarely (if ever) happens, so it is switched off. In practice, the useful values are close to 0.0, as only a small percentage of pixels need to be saved for the operation to be useful.

The exact relationship is probably not necessary for users to worry about, but is included in the appendix out of interest: Light scissoring threshold calculation

Bottom right is a light, the red area is the pixels saved by the scissoring operation. Only the intersection needs to be rendered.

Vertex baking

The GPU shader receives instructions on what to draw in 2 main ways:

• Shader uniforms (e.g. modulate color, item transform).
• Vertex attributes (vertex color, local transform).

However, within a single draw call (batch), we cannot change uniforms. This means that naively, we would not be able to batch together items or commands that change final_modulate or an item’s transform. Unfortunately, that happens in an awful lot of cases. For instance, sprites are typically individual nodes with their own item transform, and they may have their own color modulate as well.

To get around this problem, the batching can “bake” some of the uniforms into the vertex attributes.

• The item transform can be combined with the local transform and sent in a vertex attribute.
• The final modulate color can be combined with the vertex colors, and sent in a vertex attribute.

In most cases, this works fine, but this shortcut breaks down if a shader expects these values to be available individually rather than combined. This can happen in custom shaders.

Custom shaders

As a result of the limitation described above, certain operations in custom shaders will prevent vertex baking and therefore decrease the potential for batching. While we are working to decrease these cases, the following caveats currently apply:

• Reading or writing COLOR or MODULATE disables vertex color baking.
• Reading VERTEX disables vertex position baking.

Project Settings

To fine-tune batching, a number of project settings are available. You can usually leave these at default during development, but it’s a good idea to experiment to ensure you are getting maximum performance. Spending a little time tweaking parameters can often give considerable performance gains for very little effort. See the on-hover tooltips in the Project Settings for more information.

rendering/batching/options

• use_batching - Turns batching on or off.
• use_batching_in_editor Turns batching on or off in the Godot editor. This setting doesn’t affect the running project in any way.
• single_rect_fallback - This is a faster way of drawing unbatchable rectangles. However, it may lead to flicker on some hardware so it’s not recommended.

rendering/batching/parameters

• max_join_item_commands - One of the most important ways of achieving batching is to join suitable adjacent items (nodes) together, however they can only be joined if the commands they contain are compatible. The system must therefore do a lookahead through the commands in an item to determine whether it can be joined. This has a small cost per command, and items with a large number of commands are not worth joining, so the best value may be project dependent.
• colored_vertex_format_threshold - Baking colors into vertices results in a larger vertex format. This is not necessarily worth doing unless there are a lot of color changes going on within a joined item. This parameter represents the proportion of commands containing color changes / the total commands, above which it switches to baked colors.
• batch_buffer_size - This determines the maximum size of a batch, it doesn’t have a huge effect on performance but can be worth decreasing for mobile if RAM is at a premium.
• item_reordering_lookahead - Item reordering can help especially with interleaved sprites using different textures. The lookahead for the overlap test has a small cost, so the best value may change per project.

rendering/batching/lights

• scissor_area_threshold - See light scissoring.
• max_join_items - Joining items before lighting can significantly increase performance. This requires an overlap test, which has a small cost, so the costs and benefits may be project dependent, and hence the best value to use here.

rendering/batching/debug

• flash_batching - This is purely a debugging feature to identify regressions between the batching and legacy renderer. When it is switched on, the batching and legacy renderer are used alternately on each frame. This will decrease performance, and should not be used for your final export, only for testing.
• diagnose_frame - This will periodically print a diagnostic batching log to the Godot IDE / console.

rendering/batching/precision

• uv_contract - On some hardware (notably some Android devices) there have been reports of tilemap tiles drawing slightly outside their UV range, leading to edge artifacts such as lines around tiles. If you see this problem, try enabling uv contract. This makes a small contraction in the UV coordinates to compensate for precision errors on devices.
• uv_contract_amount - Hopefully, the default amount should cure artifacts on most devices, but this value remains adjustable just in case.

Diagnostics

Although you can change parameters and examine the effect on frame rate, this can feel like working blindly, with no idea of what is going on under the hood. To help with this, batching offers a diagnostic mode, which will periodically print out (to the IDE or console) a list of the batches that are being processed. This can help pinpoint situations where batching isn’t occurring as intended, and help you fix these situations to get the best possible performance.

Reading a diagnostic

canvas_begin FRAME 2604
items
    joined_item 1 refs
            batch D 0-0
            batch D 0-2 n n
            batch R 0-1 [0 - 0] {255 255 255 255 }
    joined_item 1 refs
            batch D 0-0
            batch R 0-1 [0 - 146] {255 255 255 255 }
            batch D 0-0
            batch R 0-1 [0 - 146] {255 255 255 255 }
    joined_item 1 refs
            batch D 0-0
            batch R 0-2560 [0 - 144] {158 193 0 104 } MULTI
            batch D 0-0
            batch R 0-2560 [0 - 144] {158 193 0 104 } MULTI
            batch D 0-0
            batch R 0-2560 [0 - 144] {158 193 0 104 } MULTI
canvas_end

This is a typical diagnostic.

• joined_item: A joined item can contain 1 or more references to items (nodes). Generally, joined_items containing many references is preferable to many joined_items containing a single reference. Whether items can be joined will be determined by their contents and compatibility with the previous item.
• batch R: A batch containing rectangles. The second number is the number of rects. The second number in square brackets is the Godot texture ID, and the numbers in curly braces is the color. If the batch contains more than one rect, MULTI is added to the line to make it easy to identify. Seeing MULTI is good as it indicates successful batching.
• batch D: A default batch, containing everything else that is not currently batched.

Default batches

The second number following default batches is the number of commands in the batch, and it is followed by a brief summary of the contents:

l - line
PL - polyline
r - rect
n - ninepatch
PR - primitive
p - polygon
m - mesh
MM - multimesh
PA - particles
c - circle
t - transform
CI - clip_ignore

You may see “dummy” default batches containing no commands; you can ignore those.

常见问题

I don’t get a large performance increase when enabling batching.

• Try the diagnostics, see how much batching is occurring, and whether it can be improved
• Try changing batching parameters in the Project Settings.
• Consider that batching may not be your bottleneck (see bottlenecks).

I get a decrease in performance with batching.

• Try the steps described above to increase the number of batching opportunities.
• Try enabling single_rect_fallback.
• The single rect fallback method is the default used without batching, and it is approximately twice as fast. However, it can result in flickering on some hardware, so its use is discouraged.
• After trying the above, if your scene is still performing worse, consider turning off batching.

I use custom shaders and the items are not batching.

• Custom shaders can be problematic for batching, see the custom shaders section

I am seeing line artifacts appear on certain hardware.

• See the uv_contract project setting which can be used to solve this problem.

I use a large number of textures, so few items are being batched.

• Consider using texture atlases. As well as allowing batching, these reduce the need for state changes associated with changing textures.

Appendix

Light scissoring threshold calculation

The actual proportion of screen pixel area used as the threshold is the scissor_area_threshold value to the power of 4.

For example, on a screen size of 1920×1080, there are 2,073,600 pixels.

At a threshold of 1,000 pixels, the proportion would be:

1000 / 2073600 = 0.00048225
0.00048225 ^ (1/4) = 0.14819

So a scissor_area_threshold of 0.15 would be a reasonable value to try.

Going the other way, for instance with a scissor_area_threshold of 0.5:

0.5 ^ 4 = 0.0625
0.0625 * 2073600 = 129600 pixels

If the number of pixels saved is greater than this threshold, the scissor is activated.