Windows 特定的监控项键值

Windows-specific items

The table provides details on the item keys that are supported only by Zabbix Windows agent.

Item key details

Parameters without angle brackets are mandatory. Parameters marked with angle brackets < > are optional.

eventlog[name,<regexp>,<severity>,<source>,<eventid>,<maxlines>,<mode>]

The event log monitoring.
Return value: Log.

Parameters:

• name - the name of the event log;

• regexp - a regular expression describing the required pattern (case sensitive);

• severity - a regular expression describing severity (case insensitive). This parameter accepts the following values: “Information”, “Warning”, “Error”, “Critical”, “Verbose” (running on Windows Vista or newer).

• source - a regular expression describing the source identifier (case insensitive);

• eventid - a regular expression describing the event identifier(s) (case sensitive);

• maxlines - the maximum number of new lines per second the agent will send to Zabbix server or proxy. This parameter overrides the value of ‘MaxLinesPerSecond’ in zabbix_agentd.win.conf.

• mode - possible values: all (default) or skip - skip the processing of older data (affects only newly created items).

Comments:

• The item must be configured as an active check;
• The agent is unable to send in events from the “Forwarded events” log;
• Windows Eventing 6.0 is supported;
• Selecting a non-Log type of information for this item will lead to the loss of local timestamp, as well as log severity and source information;
• See also additional information on log monitoring.

Examples:

eventlog[Application]
       eventlog[Security,,"Failure Audit",,^(529|680)$]
       eventlog[System,,"Warning|Error"]
       eventlog[System,,,,^1$]
       eventlog[System,,,,@TWOSHORT] #here a custom regular expression named `TWOSHORT` is referenced (defined as a *Result is TRUE* type, the expression itself being `^1$|^70$`).

net.if.list

The network interface list (includes interface type, status, IPv4 address, description).
Return value: Text.

Comments:

• Multi-byte interface names supported;
• Disabled interfaces are not listed;
• Enabling/disabling some components may change their ordering in the Windows interface name;
• Some Windows versions (for example, Server 2008) might require the latest updates installed to support non-ASCII characters in interface names.

perf_counter[counter,<interval>]

The value of any Windows performance counter.
Return value: Integer, float, string or text (depending on the request).

Parameters:

• counter - the path to the counter;

• interval - the last N seconds for storing the average value. The interval must be between 1 and 900 seconds (included) and the default value is 1.

Comments:

• interval is used for counters that require more than one sample (like CPU utilization), so the check returns an average value for last “interval” seconds every time;
• Performance Monitor can be used to obtain the list of available counters.
• See also: Windows performance counters.

perf_counter_en[counter,<interval>]

The value of any Windows performance counter in English.
Return value: Integer, float, string or text (depending on the request).

Parameters:

• counter - the path to the counter in English;

• interval - the last N seconds for storing the average value. The interval must be between 1 and 900 seconds (included) and the default value is 1.

Comments:

• interval is used for counters that require more than one sample (like CPU utilization), so the check returns an average value for last “interval” seconds every time;
• This item is only supported on Windows Server 2008/Vista and above;
• You can find the list of English strings by viewing the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib\009.

perf_instance.discovery[object]

The list of object instances of Windows performance counters. Used for low-level discovery.
Return value: JSON object.

Parameter:

• object - the object name (localized).

perf_instance_en.discovery[object]

The list of object instances of Windows performance counters, discovered using the object names in English. Used for low-level discovery.
Return value: JSON object.

Parameter:

• object - the object name (in English).

proc_info[process,<attribute>,<type>]

Various information about specific process(es).
Return value: Float.

Parameters:

• process - the process name;

• attribute - the requested process attribute;

• type - the representation type (meaningful when more than one process with the same name exists)

Comments:

• The following attributes are supported:
  vmsize (default) - size of process virtual memory in Kbytes
  wkset - size of process working set (amount of physical memory used by process) in Kbytes
  pf - number of page faults
  ktime - process kernel time in milliseconds
  utime - process user time in milliseconds
  io_read_b - number of bytes read by process during I/O operations
  io_read_op - number of read operation performed by process
  io_write_b - number of bytes written by process during I/O operations
  io_write_op - number of write operation performed by process
  io_other_b - number of bytes transferred by process during operations other than read and write operations
  io_other_op - number of I/O operations performed by process, other than read and write operations
  gdiobj - number of GDI objects used by process
  userobj - number of USER objects used by process;

• Valid types are:
  avg (default) - average value for all processes named <process>
  min - minimum value among all processes named <process>
  max - maximum value among all processes named <process>
  sum - sum of values for all processes named <process>;

• io\*, _gdiobj and userobj attributes are available only on Windows 2000 and later versions of Windows, not on Windows NT 4.0;
• On a 64-bit system, a 64-bit Zabbix agent is required for this item to work correctly.

Examples:

proc_info[iexplore.exe,wkset,sum] #retrieve the amount of physical memory taken by all Internet Explorer processes
       proc_info[iexplore.exe,pf,avg] #retrieve the average number of page faults for Internet Explorer processes

registry.data[key,<value name>]

Return data for the specified value name in the Windows Registry key.
Return value: Integer, string or text (depending on the value type)

Parameters:

• key - the registry key including the root key; root abbreviations (e.g. HKLM) are allowed;
• value name - the registry value name in the key (empty string “” by default). The default value is returned if the value name is not supplied.

Comments:

• Supported root abbreviations:
  HKCR - HKEY_CLASSES_ROOT
  HKCC - HKEY_CURRENT_CONFIG
  HKCU - HKEY_CURRENT_USER
  HKCULS - HKEY_CURRENT_USER_LOCAL_SETTINGS
  HKLM - HKEY_LOCAL_MACHINE
  HKPD - HKEY_PERFORMANCE_DATA
  HKPN - HKEY_PERFORMANCE_NLSTEXT
  HKPT - HKEY_PERFORMANCE_TEXT
  HKU - HKEY_USERS

• Keys with spaces must be double-quoted.

Examples:

registry.data["HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting"] #return the data of the default value of this key
       registry.data["HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting","EnableZip"] #return the data of the value named "Enable Zip" in this key

registry.get[key,<mode>,<name regexp>]

The list of Windows Registry values or keys located at given key.
Return value: JSON object.

Parameters:

• key - the registry key including the root key; root abbreviations (e.g. HKLM) are allowed (see comments for registry.data[] to see full list of abbreviations);

• mode - possible values:
  values (default) or keys;

• name regexp - only discover values with names that match the regexp (default - discover all values). Allowed only with values as mode.

Keys with spaces must be double-quoted.

Examples:

registry.get[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall,values,"^DisplayName|DisplayVersion$"] #return the data of the values named "DisplayName" or "DisplayValue" in this key. The JSON will include details of the key, last subkey, value name, value type and value data.
       registry.get[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall,values] #return the data of the all values in this key. The JSON will include details of the key, last subkey, value name, value type and value data.
       registry.get[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall,keys] #return all subkeys of this key. The JSON will include details of the key and last subkey.

service.discovery

The list of Windows services. Used for low-level discovery.
Return value: JSON object.

service.info[service,<param>]

Information about a service.
Return value: Integer - with param as state, startup; String - with param as displayname, path, user; Text - with param as description
Specifically for state: 0 - running, 1 - paused, 2 - start pending, 3 - pause pending, 4 - continue pending, 5 - stop pending, 6 - stopped, 7 - unknown, 255 - no such service
Specifically for startup: 0 - automatic, 1 - automatic delayed, 2 - manual, 3 - disabled, 4 - unknown, 5 - automatic trigger start, 6 - automatic delayed trigger start, 7 - manual trigger start

Parameters:

• service - a real service name or its display name as seen in the MMC Services snap-in;
• param - state (default), displayname, path, user, startup, or description.

Comments:

• Items like service.info[service,state] and service.info[service] will return the same information;
• Only with param as state this item returns a value for non-existing services (255).

Examples:

service.info[SNMPTRAP] - state of the SNMPTRAP service;
       service.info[SNMP Trap] - state of the same service, but with the display name specified;
       service.info[EventLog,startup] - the startup type of the EventLog service

services[<type>,<state>,<exclude>]

The listing of services.
Return value: 0 - if empty; Text - the list of services separated by a newline.

Parameters:

• type - all (default), automatic, manual, or disabled;
• state - all (default), stopped, started, start_pending, stop_pending, running, continue_pending, pause_pending, or paused;
• exclude - the services to exclude from the result. Excluded services should be listed in double quotes, separated by comma, without spaces.

Examples:

services[,started] #returns the list of started services;
       services[automatic, stopped] #returns the list of stopped services that should be running;
       services[automatic, stopped, "service1,service2,service3"] #returns the list of stopped services that should be running, excluding services named "service1", "service2" and "service3"

vm.vmemory.size[<type>]

The virtual memory size in bytes or in percentage from the total.
Return value: Integer - for bytes; float - for percentage.

Parameter:

• type - possible values: available (available virtual memory), pavailable (available virtual memory, in percent), pused (used virtual memory, in percent), total (total virtual memory, default), or used (used virtual memory)

Comments:

• The monitoring of virtual memory statistics is based on:

  • Total virtual memory on Windows (total physical + page file size);

  • The maximum amount of memory Zabbix agent can commit;

  • The current committed memory limit for the system or Zabbix agent, whichever is smaller.

Example:

vm.vmemory.size[pavailable] #return the available virtual memory, in percentage

wmi.get[<namespace>,<query>]

Execute a WMI query and return the first selected object.
Return value: Integer, float, string or text (depending on the request).

Parameters:

• namespace - the WMI namespace;

• query - the WMI query returning a single object.

WMI queries are performed with WQL.

Example:

wmi.get[root\cimv2,select status from Win32_DiskDrive where Name like '%PHYSICALDRIVE0%'] #returns the status of the first physical disk

wmi.getall[<namespace>,<query>]

Execute a WMI query and return the whole response. Can be used for low-level discovery.
Return value: JSON object

Parameters:

• namespace - the WMI namespace;

• query - the WMI query.

Comments:

• WMI queries are performed with WQL.
• JSONPath preprocessing can be used to point to more specific values in the returned JSON.

Example:

wmi.getall[root\cimv2,select * from Win32_DiskDrive where Name like '%PHYSICALDRIVE%'] #returns status information of physical disks

监控Windows服务

本教程提供了设置 Windows 服务监控的分步说明。假设 Zabbix server 和 agent 已经配置好并且可以运行。

第一步

获取服务名称

您可以通过转到 MMC 服务管理单元并调出服务的属性来获得该名称。在“常规”选项卡中，您应该会看到一个名为“服务名称”的字段。后面的值是您在设置监控项时将使用的名称。

例如，如果您想监控“工作站”服务，那么您的服务可能是：lanmanworkstation。

第二步

为监控服务配置监控项 。

该监控项 service.info[service,<param>] 检索有关特定服务的信息。根据您需要的信息, 指定接受以下的param选项: displayname, state, path, user, startup or description.。如果 param 未指定(service.info[service])，则默认的值为state

返回值的类型取决于选择的param：对于state和startup是整型，displayname,path和user为字符串类型，description为文本型

例子:

• 键: service.info[lanmanworkstation]
• 值类型: 数字 (无符号)
• 显示值:选择 Windows服务状态 值映射

两个值映射可用_Windows service state_和 Windows service startup type 将数值映射到前端中的文本表示。

Windows服务的发现

低级别自动发现 提供了一种在计算机上为不同实体自动创建项目、触发器和图形的方法。 Zabbix可以自动开始监控机器上的Windows服务，无需知道服务的确切名称，也可以手动创建每个服务的项目。过滤器可用于仅为感兴趣的服务生成实际监控项、触发器和图形。

Overview

This section provides details on the Zabbix agent items that are supported on Windows. The supported items are presented in two tables:

• Agent items - the agent item keys also supported on Windows
• Windows-specific items - the item keys that are supported only on Windows:
• eventlog/[/]
• net.if.list
• perf_counter/[/]
• perf_counter_en/[/]
• perf_instance.discovery/[/]
• proc_info/[/]
• service.discovery
• service.info/[/]
• services
• wmi.get/[/]
• wmi.getall/[/]
• vm.vmemory.size/[/]

Windows-specific items sometimes are an approximate counterpart of a similar agent item, for example proc_info, supported on Windows, roughly corresponds to the proc.mem item, not supported on Windows.

Note that all item keys supported by Zabbix agent on Windows are also supported by Zabbix agent 2. See item keys supported by Zabbix agent 2 for additional item keys that you can use with the agent 2 only.

See also: Minimum permissions for Windows items

Agent items

The table below lists Zabbix agent items that are supported on Windows:

• The item key is a link to full item details in the corresponding agent item group
• The item key signature includes only those parameters that are supported on Windows
• Windows-relevant item comments are included