Managed, Online Schema Changes

Vitess offers managed, online schema migrations (aka Online DDL), transparently to the user. Vitess Online DDL offers:

As general overview:

  • User chooses a strategy for online DDL (online DDL is opt in)
  • User submits one or more schema change queries, using the standard MySQL CREATE TABLE, ALTER TABLE, DROP TABLE, CREATE VIEW, ALTER VIEW, DROP VIEW syntax.
  • Vitess responds with a Job ID for each schema change query.
  • Vitess resolves affected shards.
  • A shard’s primary tablet schedules the migration to run when possible.
  • Tablets will independently run schema migrations:
    • ALTER TABLE statements run via VReplication, gh-ost or pt-online-schema-change, as per selected strategy
    • CREATE TABLE and CREATE VIEW statements run directly.
    • DROP TABLE statements run safely and lazily.
    • ALTER VIEW and DROP VIEW are internally modified to allow quick revert.
  • Vitess provides the user a mechanism to view migration status, launch (if required), complete (if required), cancel or retry migrations, based on the job ID.

Syntax

The standard MySQL syntax for CREATE, ALTER and DROP is supported.

ALTER TABLE

Use the standard MySQL ALTER TABLE syntax to run online DDL. Whether your schema migration runs synchronously (the default MySQL behavior) or asynchronously (aka online), is determined by ddl_strategy.

We assume we have a keyspace (schema) called commerce, with a table called demo, that has the following definition:

  1. CREATE TABLE `demo` (
  2.   `id` int NOT NULL,
  3.   `status` varchar(32) DEFAULT NULL,
  4.   PRIMARY KEY (`id`)
  5. ) ENGINE=InnoDB

Consider the following schema migration statement:

  1. ALTER TABLE demo MODIFY id bigint UNSIGNED;

This statement can be executed as:

  • a vitess (aka online), managed online migration
  • a gh-ost, managed online migration
  • a pt-online-schema-change, managed online migration (experimental)
  • a synchronous, unmanaged schema change

See DDL Strategies for discussion around the different options.

CREATE TABLE

Use the standard MySQL CREATE TABLE syntax. The query goes through the same migration flow as ALTER TABLE does. The tablets eventually run the query directly on the MySQL backends.

DROP TABLE

Use the standard MySQL DROP TABLE syntax. The query goes through the same migration flow as ALTER TABLE does. Tables are not immediately dropped. Instead, they are renamed into special names, recognizable by the table lifecycle mechanism, to then slowly and safely transition through lifecycle states into finally getting dropped.

Statement transformations

Vitess may modify your queries to qualify for online DDL statement. Modifications include:

  • A multi-table DROP statement is replaced by multiple DROP statements, each operating on a single table (and each tracked by its own job ID).
  • A CREATE INDEX statement is replaced by the equivalent ALTER TABLE statement.

ddl_strategy

You will set either @@ddl_strategy session variable, or --ddl_strategy command line flag, to control your schema migration strategy, and specifically, to enable and configure online DDL. Details in DDL Strategies. A quick overview:

  • The value "vitess" instructs Vitess to run an ALTER TABLE online DDL via VReplication. This is the preferred method.
  • The value "gh-ost" instructs Vitess to run an ALTER TABLE online DDL via gh-ost.
  • The value "pt-osc" instructs Vitess to run an ALTER TABLE online DDL via pt-online-schema-change.
  • You may specify arguments for your tool of choice, e.g. "gh-ost --max-load Threads_running=200". Details follow.
  • The value "direct", means not an online DDL. The empty value ("") is also interpreted as direct. A query is immediately pushed and applied on backend servers. This is the default strategy. The migration is not managed and is not trackable.

CREATE and DROP statements run in the same way for "vitess", "gh-ost" and "pt-osc" strategies, and we consider them all to be online.

See also ddl_strategy flags.

Running, tracking and controlling Online DDL

Vitess provides two interfaces to interacting with Online DDL:

  • SQL commands, via VTGate
  • Command line interface, via vtctlclient

Supported interactions are:

See Audit and Control for a detailed breakdown. As quick examples:

Executing an Online DDL via VTGate/SQL

  1. mysql> set @@ddl_strategy='vitess';
  3. mysql> alter table corder add column ts timestamp not null default current_timestamp;
  4. +--------------------------------------+
  5. | uuid                                 |
  6. +--------------------------------------+
  7. | bf4598ab_8d55_11eb_815f_f875a4d24e90 |
  8. +--------------------------------------+
  10. mysql> drop table customer;
  11. +--------------------------------------+
  12. | uuid                                 |
  13. +--------------------------------------+
  14. | 6848c1a4_8d57_11eb_815f_f875a4d24e90 |
  15. +--------------------------------------+

Executing an Online DDL via vtctlclient/ApplySchema

  1. $ vtctlclient ApplySchema -- --skip_preflight --ddl_strategy "vitess" --sql "ALTER TABLE demo MODIFY id bigint UNSIGNED" commerce
  2. a2994c92_f1d4_11ea_afa3_f875a4d24e90

You my run multiple migrations withing the same ApplySchema command:

  1. $ vtctlclient ApplySchema -- --skip_preflight --ddl_strategy "vitess" --sql "ALTER TABLE demo MODIFY id bigint UNSIGNED; CREATE TABLE sample (id int PRIMARY KEY); DROP TABLE another;" commerce
  2. 3091ef2a_4b87_11ec_a827_0a43f95f28a3

ApplySchema accepts the following flags:

  • --ddl_strategy: by default migrations run directly via MySQL standard DDL. This flag must be applied to indicate an online strategy. See also DDL strategies and ddl_strategy flags.
  • -migration_context <unique-value>: all migrations in a ApplySchema command are logically grouped via a unique context. A unique value will be supplied automatically. The user may choose to supply their own value, and it’s their responsibility to provide with a unique value. Any string format is accepted. The context can then be used to search for migrations, via SHOW VITESS_MIGRATIONS LIKE 'the-context'. It is visible in SHOW VITESS_MIGRATIONS ... output as the migration_context column.
  • --skip_preflight: skip an internal Vitess schema validation. When running an online DDL it’s recommended to add --skip_preflight. In future Vitess versions this flag may be removed or default to true.

Migration flow and states

A migration can be in any one of these states:

  • queued: a migration is submitted
  • ready: a migration is picked from the queue to run
  • running: a migration was started. It is periodically tested to be making progress.
  • complete: a migration completed successfully
  • failed: a migration started running and failed due to whatever reason
  • cancelled: a pending migration was cancelled

A migration is said to be pending if we expect it to run and complete. Pending migrations are those in queued, ready and running states.

For more about internals of the scheduler and how migration states are controlled, see Online DDL Scheduler

Configuration

  • --retain_online_ddl_tables: (vttablet) determines how long vttablet should keep an old migrated table before purging it. Type: duration. Default: 24 hours.

    Example: vttablet -retain_online_ddl_tables 48h

  • --migration_check_interval: (vttablet) interval between checks for submitted migrations. Type: duration Default: 1 minute.

    Example: vttablet --migration_check_interval 30s

  • --enable_online_ddl: (vtgate) whether Online DDL operations are at all possible through VTGate. Type: boolean. Default: true

    Example: vtgate --enable_online_ddl=false to disable access to Online DDL via VTGate.

Auto resume after failure

VReplication based migrations (ddl_strategy="vitess") are failover agnostic. They automatically resume after either planned promotion (PlannedReparentShard), emergency promotion (EmergencyReparentShard) or completely external reparenting.

Once the new primary is in place and turns active, it auto-resumes the VReplication stream. The online DDL scheduler assumes ownership of the stream and follows it to completion.

The new primary must be available within 10 minutes, or else the migration is considered to be stale and is aborted.

Auto retry after failure

Neither gh-ost and pt-osc are able to resume from point of failure, or after a failover. However, Vitess management can issue an automated retry (starting the migration afresh).

  • which vttablet initiated the migration
  • how many times a migration has been retried
  • whether a migration failed due to a vttablet failure (as is the case in a failover scenario)

Vitess will auto-retry a failed migration when:

  • The migration failed due to a vttablet failure, and
  • it has not been retried (this is a temporary restriction)

The migration will be transitioned into queued state, as if the user requested a retry operation. Note that this takes place on a per-shard basis.

The primary use case is a primary failure and failover. The newly promoted tablet will be able to retry the migration that broke during the previous primary failure. To clarify, the migration will start anew, as at this time there is no mechanism to resume a broken migration.

Throttling

All three strategies: vitess, gh-ost and pt-osc utilize the tablet throttler, which is a cooperative throttler service based on replication lag. The tablet throttler automatically detects topology REPLICA tablets and adapts to changes in the topology. See Tablet throttler.

  • vitess strategy uses the throttler by the fact VReplication natively uses the throttler on both source and target ends (for both reads and writes)
  • gh-ost uses the throttler via --throttle-http, which is automatically provided by Vitess
  • pt-osc uses the throttler by replication lag plugin, automatically injected by Vitess.

NOTE that at this time (and subject to change) the tablet throttler is disabled by default. Enable it with vttablet‘s -enable-lag-throttler flag. If the tablet throttler is disabled, schema migrations will not throttle on replication lag.

Table cleanup

All ALTER strategies leave artifacts behind. Whether successful or failed, either the original table or the ghost table is left still populated at the end of the migration. Vitess explicitly makes sure the tables are not dropped at the end of the migration. This is for two reasons:

  • Make the table/data still available for a while, and
  • In MySQL prior to 8.0.23, a DROP TABLE operation can be dangerous in production as it commonly locks the buffer pool for a substantial period.

The tables are kept for 24 hours after migration completion. Vitess automatically cleans up those tables as soon as a migration completes (either successful or failed). You will normally not need to do anything.

Artifact tables are identifiable via artifacts column in a SHOW VITESS_MIGRATION ... command. You should generally not touch these tables. It’s possible to DROP those tables with direct DDL strategy. Note that dropping tables in production can be risky and lock down your database for a substantial period of time. Dropping artifact tables also makes the migrations impossible to revert.