API

Traefik exposes a number of information through an API handler, such as the configuration of all routers, services, middlewares, etc.

As with all features of Traefik, this handler can be enabled with the static configuration.

Security

Enabling the API in production is not recommended, because it will expose all configuration elements, including sensitive data.

In production, it should be at least secured by authentication and authorizations.

A good sane default (non exhaustive) set of recommendations would be to apply the following protection mechanisms:

• At the transport level: NOT publicly exposing the API’s port, keeping it restricted to internal networks (as in the principle of least privilege, applied to networks).

Configuration

If you enable the API, a new special service named [[email protected]](https://doc.traefik.io/cdn-cgi/l/email-protection) is created and can then be referenced in a router.

To enable the API handler, use the following option on the static configuration:

File (YAML)

# Static Configuration
api: {}

File (TOML)

# Static Configuration
[api]

CLI

--api=true

And then define a routing configuration on Traefik itself with the dynamic configuration:

Docker

# Dynamic Configuration
labels:
  - "traefik.http.routers.api.rule=Host(`traefik.example.com`)"
  - "[email protected]"
  - "traefik.http.routers.api.middlewares=auth"
  - "traefik.http.middlewares.auth.basicauth.users=test:$$apr1$$H6uskkkW$$IgXLP6ewTrSuBkTrqE8wj/,test2:$$apr1$$d9hr9HBB$$4HxwgUir3HP4EsggP/QNo0"

Docker (Swarm)

# Dynamic Configuration
deploy:
  labels:
    - "traefik.http.routers.api.rule=Host(`traefik.example.com`)"
    - "[email protected]"
    - "traefik.http.routers.api.middlewares=auth"
    - "traefik.http.middlewares.auth.basicauth.users=test:$$apr1$$H6uskkkW$$IgXLP6ewTrSuBkTrqE8wj/,test2:$$apr1$$d9hr9HBB$$4HxwgUir3HP4EsggP/QNo0"
    # Dummy service for Swarm port detection. The port can be any valid integer value.
    - "traefik.http.services.dummy-svc.loadbalancer.server.port=9999"

Kubernetes CRD

apiVersion: traefik.io/v1alpha1
kind: IngressRoute
metadata:
  name: traefik-dashboard
spec:
  routes:
  - match: Host(`traefik.example.com`)
    kind: Rule
    services:
    - name: [email protected]
      kind: TraefikService
    middlewares:
      - name: auth
---
apiVersion: traefik.io/v1alpha1
kind: Middleware
metadata:
  name: auth
spec:
  basicAuth:
    secret: secretName # Kubernetes secret named "secretName"

Consul Catalog

# Dynamic Configuration
- "traefik.http.routers.api.rule=Host(`traefik.example.com`)"
- "[email protected]"
- "traefik.http.routers.api.middlewares=auth"
- "traefik.http.middlewares.auth.basicauth.users=test:$$apr1$$H6uskkkW$$IgXLP6ewTrSuBkTrqE8wj/,test2:$$apr1$$d9hr9HBB$$4HxwgUir3HP4EsggP/QNo0"

Marathon

"labels": {
  "traefik.http.routers.api.rule": "Host(`traefik.example.com`)",
  "traefik.http.routers.api.service": "[email protected]",
  "traefik.http.routers.api.middlewares": "auth",
  "traefik.http.middlewares.auth.basicauth.users": "test:$$apr1$$H6uskkkW$$IgXLP6ewTrSuBkTrqE8wj/,test2:$$apr1$$d9hr9HBB$$4HxwgUir3HP4EsggP/QNo0"
}

Rancher

# Dynamic Configuration
labels:
  - "traefik.http.routers.api.rule=Host(`traefik.example.com`)"
  - "[email protected]"
  - "traefik.http.routers.api.middlewares=auth"
  - "traefik.http.middlewares.auth.basicauth.users=test:$$apr1$$H6uskkkW$$IgXLP6ewTrSuBkTrqE8wj/,test2:$$apr1$$d9hr9HBB$$4HxwgUir3HP4EsggP/QNo0"

File (YAML)

# Dynamic Configuration
http:
  routers:
    api:
      rule: Host(`traefik.example.com`)
      service: [email protected]nternal
      middlewares:
        - auth
  middlewares:
    auth:
      basicAuth:
        users:
          - "test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/"
          - "test2:$apr1$d9hr9HBB$4HxwgUir3HP4EsggP/QNo0"

File (TOML)

# Dynamic Configuration
[http.routers.my-api]
  rule = "Host(`traefik.example.com`)"
  service = "[email protected]"
  middlewares = ["auth"]
[http.middlewares.auth.basicAuth]
  users = [
    "test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/",
    "test2:$apr1$d9hr9HBB$4HxwgUir3HP4EsggP/QNo0",
  ]

The router’s rule must catch requests for the URI path /api

Using an “Host” rule is recommended, by catching all the incoming traffic on this host domain to the API. However, you can also use “path prefix” rule or any combination or rules.

Host Rule

# Matches http://traefik.example.com, http://traefik.example.com/api
# or http://traefik.example.com/hello
rule = "Host(`traefik.example.com`)"

Path Prefix Rule

# Matches http://api.traefik.example.com/api or http://example.com/api
# but does not match http://api.traefik.example.com/hello
rule = "PathPrefix(`/api`)"

Combination of Rules

# Matches http://traefik.example.com/api or http://traefik.example.com/dashboard
# but does not match http://traefik.example.com/hello
rule = "Host(`traefik.example.com`) && (PathPrefix(`/api`) || PathPrefix(`/dashboard`))"

insecure

Enable the API in insecure mode, which means that the API will be available directly on the entryPoint named traefik.

Info

If the entryPoint named traefik is not configured, it will be automatically created on port 8080.

File (YAML)

api:
  insecure: true

File (TOML)

[api]
  insecure = true

CLI

--api.insecure=true

dashboard

Optional, Default=true

Enable the dashboard. More about the dashboard features here.

File (YAML)

api:
  dashboard: true

File (TOML)

[api]
  dashboard = true

CLI

--api.dashboard=true

With Dashboard enabled, the router rule must catch requests for both /api and /dashboard

Please check the Dashboard documentation to learn more about this and to get examples.

debug

Optional, Default=false

Enable additional endpoints for debugging and profiling, served under /debug/.

File (YAML)

api:
  debug: true

File (TOML)

[api]
  debug = true

CLI

--api.debug=true

Endpoints

All the following endpoints must be accessed with a GET HTTP request.