This document walks you through a simple demonstration of how TiKV replicates, distributes, and rebalances data. To start a 3-node local cluster, you need to perform the following operations:

  1. Write some data via go-ycsb, and then verify whether the data is replicated in triplicate by default.
  2. Add two more nodes and see how TiKV automatically rebalances replicas to efficiently use all available capacity.

Do not apply this operation in the production environment.

Prerequisites

Make sure that you have installed TiUP as described in TiKV in 5 Minutes.

Step 1: Start a 3-node cluster

  1. Check your TiUP version. Execute the following command:

    1. tiup -v

  2. Depending on the TiUP version, execute the tiup-playground command to start a 3-node local cluster.

    If TiUP version is v1.5.2 or later, execute the following command:

    1. tiup playground --mode tikv-slim --kv 3

    If TiUP version is earlier than v1.5.2, execute the following command:

    1. tiup playground --kv 3

After you execute the command, the output is as follows:

  1. Starting component `playground`: /home/pingcap/.tiup/components/playground/v1.5.0/tiup-playground --mode tikv-slim --kv 3
  2. Using the version v5.0.2 for version constraint "".
  4. If you'd like to use a TiDB version other than v5.0.2, cancel and retry with the following arguments:
  6.     Specify version manually:   tiup playground <version>
  7.     Specify version range:      tiup playground ^5
  8.     The nightly version:        tiup playground nightly
  10. Playground Bootstrapping...
  11. Start pd instance
  12. Start tikv instance
  13. Start tikv instance
  14. Start tikv instance
  15. PD client endpoints: [127.0.0.1:2379]
  16. To view the Prometheus: http://127.0.0.1:33703
  17. To view the Grafana: http://127.0.0.1:3000

Step 2: Write data

On another terminal session, you can use go-ycsb to launch a workload.

  1. Clone the go-ycsb from GitHub.

    1. git clone https://github.com/pingcap/go-ycsb.git

  2. Build the application from the source.

    1. make

  3. Load a small workload using go-ycsb.

    1. # By default, this workload will insert 1000 records into TiKV.
    2. ./bin/go-ycsb load tikv -P workloads/workloada -p tikv.pd="127.0.0.1:2379" -p tikv.type="raw"

Step 3: Verify the replication

To understand the replication in TiKV, it is important to review several concepts in the architecture.

ConceptDescription
RegionTiKV can be taken as a giant sorted map of key-value pairs. The Region is the basic unit of key-value data movement. Each Region is a range of keys and is replicated to multiple Nodes. These multiple replicas form a Raft group.
PeerTiKV replicates each Region (three times by default) and stores each replica on a different peer. In the same node, it contains multiple peers of different Regions.

  1. Open the Grafana at http://localhost:3000 (printed from the tiup-playground command), and then log in to Grafana using username admin and password admin.

  2. On the playground-overview dashboard, check the metrics on the Region panel in the TiKV tab. You can see that the numbers of Regions on all three nodes are the same, which indicates the following:

    • There is only one Region. It contains the data imported by go-ycsb.
    • Each Region has 3 replicas (according to the default configuration).
    • For each Region, each replica is stored in different stores.

Replication and Rebalancing - 图1

Step 4: Write more data

In this section, you can launch a larger workload, scale the 3-node local cluster to a 5-node cluster, and then check whether the load of the TiKV cluster is rebalanced as expected.

  1. Start a new terminal session and launch a larger workload with go-ycsb. For example, on a machine with 16 virtual cores, you can launch a workload by executing the following command:

    1. ./bin/go-ycsb load tikv -P workloads/workloada -p tikv.pd="127.0.0.1:2379" -p tikv.type="raw" -p tikv.conncount=16 -p threadcount=16 -p recordcount=1000000

  2. Go to the playground-overview dashboard of the Grafana, and check the Region distribution on the TiKV cluster. The number of Regions keeps increasing while writing data to the cluster as follows:

Replication and Rebalancing - 图2

Step 5: Add two more nodes

  1. Start another terminal session and use the tiup playground command to scale out the cluster.

    1. tiup playground scale-out --kv 2

  2. Verify the scale-out cluster by executing the following command:

    1. tiup playground display

    The output is as follows:

    1. Pid     Role  Uptime
    2. ---     ----  ------
    3. 282731  pd    4h1m23.792495134s
    4. 282752  tikv  4h1m23.77761744s
    5. 282757  tikv  4h1m23.761628915s
    6. 282761  tikv  4h1m23.748199302s
    7. 308242  tikv  9m50.551877838s
    8. 308243  tikv  9m50.537477856s

Step 6: Verify the data rebalance

Go to the Grafana page as mentioned above. You can find some Regions are split and rebalanced to the two new nodes.

Replication and Rebalancing - 图3

Step 7: Stop and delete the cluster

If you do not need the local TiKV cluster anymore, you can stop and delete it.

  1. To stop the TiKV cluster, get back to the terminal session in which you have started the TiKV cluster. Press Ctrl + C and wait for the cluster to stop.

  2. After the cluster is stopped, to delete the cluster, execute the following command:

    1. tiup clean --all