Automatic clustering

Dynamically form rqlite clusters and automate your deployment of rqlite

Automatic Bootstrapping

While manually creating a cluster is simple, it does suffer one drawback – you must start one node first and with different options, so it can become the Leader. Automatic Bootstrapping, in contrast, allows you to start all the nodes at once, and in a very similar manner. You just need to know the network addresses of the nodes ahead of time.

For simplicity, let’s assume you want to run a 3-node rqlite cluster. The network addresses of the nodes are $HOST1, $HOST2, and $HOST3. To bootstrap the cluster, use the -bootstrap-expect option like so:

Node 1:

  1. rqlited -node-id 1 -http-addr=$HOST1:4001 -raft-addr=$HOST1:4002 \
  2. -bootstrap-expect 3 -join http://$HOST1:4001,http://$HOST2:4001,http://$HOST3:4001 data

Node 2:

  1. rqlited -node-id 2 -http-addr=$HOST2:4001 -raft-addr=$HOST2:4002 \
  2. -bootstrap-expect 3 -join http://$HOST1:4001,http://$HOST2:4001,http://$HOST3:4001 data

Node 3:

  1. rqlited -node-id 3 -http-addr=$HOST3:4001 -raft-addr=$HOST3:4002 \
  2. -bootstrap-expect 3 -join http://$HOST1:4001,http://$HOST2:4001,http://$HOST3:4001 data

-bootstrap-expect should be set to the number of nodes that must be available before the bootstrapping process will commence, in this case 3. You also set -join to the HTTP URL of all 3 nodes in the cluster. It’s also required that each launch command has the same values for -bootstrap-expect and -join.

After the cluster has formed, you can launch more nodes with the same options. A node will always attempt to first perform a normal cluster-join using the given join addresses, before trying the bootstrap approach.

Docker

With Docker you can launch every node identically:

  1. docker run rqlite/rqlite -bootstrap-expect 3 -join http://$HOST1:4001,http://$HOST2:4001,http://$HOST3:4001

where $HOST[1-3] are the expected network addresses of the containers.

Using DNS for Bootstrapping

You can also use the Domain Name System (DNS) to bootstrap a cluster. This is similar to automatic clustering, but doesn’t require you to pass the network addresses of other nodes at the command line via -join. Each each rqlite node instead learns the IP addresses it should join with by resolving a hostname using DNS.

To use this feature you create a DNS record for the host rqlite.cluster (or whatever hostname you prefer), and create an A Record for each rqlite node IP address. For example, if you’re creating a 3-node rqlite cluster, you would create 3 A Records for rqlite.cluster. Each rqlite node would then use the returned IP addresses to find the other nodes on the network, then form a cluster. Of course, one of the returned IP addresses will be the node itself, but rqlite is designed to handle that.

Let’s look at an example of creating a 3-node cluster, which autoclusters using DNS. Launch the 3 nodes as follows:

Node 1:

  1. $ rqlited -node-id 1 -http-addr=$HOST1:4001 -raft-addr=$HOST1:4002 \
  2. -disco-mode=dns -disco-config='{"name":"rqlite.cluster"}' -bootstrap-expect 3 data

Node 2:

  1. $ rqlited -node-id 2 -http-addr=$HOST2:4001 -raft-addr=$HOST2:4002 \
  2. -disco-mode=dns -disco-config='{"name":"rqlite.cluster"}' -bootstrap-expect 3 data

Node 3:

  1. $ rqlited -node-id 3 -http-addr=$HOST3:4001 -raft-addr=$HOST3:4002 \
  2. -disco-mode=dns -disco-config='{"name":"rqlite.cluster"}' -bootstrap-expect 3 data

DNS is then configured such that resolving rqlite.cluster would return 3 IP addresses – the IP addresses for $HOST1, $HOST2, and $HOST3. Note that when using DNS each rqlite node will assume the other nodes are listening on the same ports as it is listening on (4001 and 4002 in the example above), but the node will try both http and https protocols when joining with other nodes.

DNS SRV

Using DNS SRV gives you more control over the rqlite node address details returned by DNS, including the HTTP port each node is listening on. This means that unlike using just simple DNS records, each rqlite node can be listening on a different HTTP port. Simple DNS records are probably good enough for most situations, however.

To launch a node using DNS SRV boostrap, execute the following (example) command:

  1. rqlited -node-id $ID  -http-addr=$HOST:4001 -raft-addr=$HOST:4002 \
  2. -disco-mode=dns-srv -disco-config='{"name":"rqlite.local","service":"rqlite-svc"}' -bootstrap-expect 3 data

You would launch other nodes similarly, setting $ID and $HOST as required for each node. You would launch other nodes similarly. In the example above rqlite will lookup SRV records at _rqlite-svc._tcp.rqlite.local

Kubernetes

DNS-based approaches can be quite useful for many deployment scenarios, in particular systems like Kubernetes. To learn how to deploy rqlite on Kubernetes, check the Kubernetes deployment guide.

Consul

Another approach uses Consul to coordinate clustering. Like DNS-based autoclustering, nodes do not need to know the network addresses of other nodes ahead of time. Instead as nodes comes up they use Consul to share networking information, allowing the nodes to find each other automatically on the network.

Let’s assume your Consul cluster is running at http://example.com:8500. Let’s also assume that you are going to run 3 rqlite nodes, each node on a different machine. Launch your rqlite nodes as follows:

Node 1:

  1. rqlited -node-id $ID1 -http-addr=$HOST1:4001 -raft-addr=$HOST1:4002 \
  2. -disco-key rqlite1 -disco-mode consul-kv -disco-config '{"address":"example.com:8500"}' data

Node 2:

  1. rqlited -node-id $ID2 -http-addr=$HOST2:4001 -raft-addr=$HOST2:4002 \
  2. -disco-key rqlite1 -disco-mode consul-kv -disco-config '{"address":"example.com:8500"}' data

Node 3:

  1. rqlited -node-id $ID3 -http-addr=$HOST3:4001 -raft-addr=$HOST3:4002 \
  2. -disco-key rqlite1 -disco-mode consul-kv -disco-config '{"address":"example.com:8500"}' data

These three nodes will automatically find each other, and cluster. You can start the nodes in any order, and at anytime. Furthermore, the cluster Leader will continually update Consul with its address. This means other nodes can be launched later and automatically join the cluster, even if the Leader changes. -disco-key is optional, but using it allows you use a single Consul system to bootstrap multiple rqlite clusters – simply use a different key for each cluster. Refer to the Next Steps documentation below for further details on Consul configuration.

Docker

It’s even easier with Docker, as you can launch every node almost identically:

  1. docker run rqlite/rqlite -disco-mode=consul-kv -disco-config '{"address":"example.com:8500"}'

etcd

A third approach uses etcd to coordinate clustering. Autoclustering with etcd is very similar to Consul. Like when you use Consul, the advantage of this approach is that you do not need to know the network addresses of all the nodes ahead of time.

Let’s assume etcd is available at example.com:2379.

Node 1:

  1. rqlited -node-id $ID1 -http-addr=$HOST1:4001 -raft-addr=$HOST1:4002 \
  2. -disco-key rqlite1 -disco-mode etcd-kv -disco-config '{"endpoints":["example.com:2379"]}' data

Node 2:

  1. rqlited -node-id $ID2 -http-addr=$HOST2:4001 -raft-addr=$HOST2:4002 \
  2. -disco-key rqlite1 -disco-mode etcd-kv -disco-config '{"endpoints":["example.com:2379"]}' data

Node 3:

  1. rqlited -node-id $ID3 -http-addr=$HOST3:4001 -raft-addr=$HOST3:4002 \
  2. -disco-key rqlite1 -disco-mode etcd-kv -disco-config '{"endpoints":["example.com:2379"]}' data

Like with Consul autoclustering, the cluster Leader will continually report its address to etcd. Again -disco-key is optional, but using it allows you use a single etcd system to bootstrap multiple rqlite clusters – simply use a different key for each cluster. Refer to the Next Steps documentation below for further details on etcd configuration.

Docker

  1. docker run rqlite/rqlite -disco-mode=etcd-kv -disco-config '{"endpoints":["example.com:2379"]}'

Next Steps

Customizing your configuration

For detailed control over Discovery configuration -disco-confg can either be an actual JSON string, or a path to a file containing a JSON-formatted configuration. The former option may be more convenient if the configuration you need to supply is very short, as in the examples above. The Discovery configuration also supports Enviroment Variable expansion, so any variable starting with $ will be replaced with that value from the environment.

The examples above demonstrates simple configurations, and most real deployments may require more detailed configuration. For example, your Consul system might be reachable only over HTTPS. To more fully configure rqlite for Discovery, consult the relevant configuration specification below. You must create a JSON-formatted configuration which matches that described in the source code.

Running multiple different rqlite clusters

If you wish a single Consul or etcd key-value system to support multiple rqlite clusters, then set the -disco-key command line argument to a different value for each cluster. To run multiple rqlite clusters with DNS, use a different domain name per cluster.

Design

When using Automatic Bootstrapping, each node notifies all other nodes of its existence. The first node to have been contacted by enough other nodes (set by -boostrap-expect) boostraps the cluster. Only one node can bootstrap a cluster, so any other node that attempts to do so later will fail, and instead become a Follower in the new cluster.

When using either Consul or etcd for automatic clustering, rqlite uses the key-value store of those systems. In each case only one node will succeed in atomically setting its HTTP URL in the key-value store. This node will then declare itself Leader, and other nodes will then join with it. To prevent multiple nodes updating the Leader key at once, nodes uses a check-and-set operation, only updating the Leader key if its value has not changed since it was last read by the node. See this blog post for more details on the design.

For DNS-based discovery, the rqlite nodes simply resolve the hostname, and use the returned network addresses, once the number of returned addresses is at least as great as the -bootstrap-expect value. Boostrapping then proceeds as though the network addresses were passed at the command line via -join.

Last modified May 30, 2023: Update _index.md (4d03491)