HEX/ProfiCNC Here+ RTK GPS

The Here+ RTK GPS receiver is a small, light and energy efficient RTK GPS module, based on the u-blox M8P. 使用RTK，PX4控制器可以获取到它的位置，并且这个位置的精度可以达到厘米级的精度，这比普通GPS提供的位置更加精确。

购买

• ProfiCNC
• Hex - China (China)
• Other resellers

配置

RTK setup and use on PX4 via QGroundControl is largely plug and play (see RTK GPS for more information).

接线和连接

The Here+ GPS comes with an 8 pin connector that can be inserted directly into the Pixhawk 2 GPS UART port.

The Pixhawk 3 Pro and Pixracer have a 6 pin GPS port connector. For these controllers you can modify the GPS cable (as shown below) to remove pin 6 and 7.

Pin 6 and 7 are for the safety button - these can be attached as well if needed.

针脚定义

The Here+ GPS pinout is provided below. 这可用于帮助用户修改接口线序以适配其它自动驾驶仪板的连接器。