Configure Snapdragon

This topic explains how to configure the Qualcomm Snapdragon Flight.

Autostart PX4 and Snap VIO

In order to boot both the ROS node and PX4 automatically on bootup, edit the /etc/rc.local file on the Snapdragon Flight to look like this (note that the first line must change too!):

#!/bin/bash -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
# Generate the SSH keys if non-existent
test -f /etc/ssh/ssh_host_dsa_key || dpkg-reconfigure openssh-server
# Prepare the ROS environment
cd /home/linaro
source /opt/ros/indigo/setup.bash
source /home/linaro/ros_ws/devel/setup.bash
# Launch the mavros vislam node but add some delay otherwise startup is not reliable
sleep 5
roslaunch snapdragon_mavros_vislam mavros_vislam.launch > /dev/null &
# Launch PX4 autopilot in VIO configuration but add some delay otherwise startup is not reliable
sleep 5
./px4 /home/linaro/ros_ws/src/ros-examples/px4_configs/ekf2/mainapp.conf > /dev/null &
exit 0

Put Snapdragon back into Access Point Mode

The Snapdragon Flight was set to station mode in the ROS Setup. This could be a problem if you want to fly it outdoors where your home Wi-Fi is no longer available, so we recommend putting it back into access point mode.

/usr/local/qr-linux/wificonfig.sh -s softap
sudo reboot

Adjust Parameters