MCollective架构篇7-多MQ下MCollective高可用部署
一、配置Rabbitmq
二、配置MCollective:
- 1. 配置mcollective client端
- 2. 配置mcollective server端
三、高可用测试
- 1. 停止MQ1，查看切换状态
- 2. 停止MQ2，启动MQ1 查看切换状态

MCollective架构篇7-多MQ下MCollective高可用部署

存在这样一种场景，当你的puppet基于mcollective环境搭建完成之后，需要考虑MQ的高可用，否则，MQ挂掉之后就不能用mco命令进行推送了哦。
如何做MQ的高可用呢，其实有两种方法：
方法一：两台MQ做集群，通过复制队列信息进行同步，节点访问可通过浮动IP进行。
方法二：两台MQ独立，在MC Server端做failover，通过rabbtimq的plugins参数实现，可设置自动检测，切换时间等等。

一、配置Rabbitmq

安装（略），可参考http://kisspuppet.com/2013/11/10/mcollective-middleware/或http://rsyslog.org/2013/11/10/mcollective-middleware/

1. 开启插件rabbitmq_stomp

[root@linuxmaster1poc ~]# rabbitmq-plugins enable rabbitmq_stomp
The following plugins have been enabled:
  rabbitmq_stomp
Plugin configuration has changed. Restart RabbitMQ for changes to take effect.

2. 添加tcp监听端口和范围

[root@linuxmaster1poc ~]# vim /etc/rabbitmq/rabbitmq.config
[
  {rabbitmq_stomp, [{tcp_listeners, [61613]}]}
].

备注：可参考 http://www.rabbitmq.com/stomp.html

3. 创建账户并设置权限

如果你以前配置过，建议将配置清空

[root@linuxmaster1poc ~]# rabbitmqctl stop_app
Stopping node rabbit@linuxmaster1poc ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl reset
Resetting node rabbit@linuxmaster1poc ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl start_app
Starting node rabbit@linuxmaster1poc ...
...done.

删除默认用户guest，添加三个用户（web_admin-http访问用，admin—管理员，mc_rabbitmq—mcollective链接用）

[root@linuxmaster1poc ~]# rabbitmqctl list_users
Listing users ...
guest    [administrator]
...done.
[root@linuxmaster1poc ~]# rabbitmqctl delete_user guest
Deleting user "guest" ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl add_user mc_rabbitmq 123.com
Creating user "mc_rabbitmq" ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl add_user admin password=123.com 
Creating user "admin" ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl add_user web_admin 123.com
Creating user "web_admin" ...
...done.

设置用户的角色

[root@linuxmaster1poc ~]# rabbitmqctl set_user_tags admin administrator
Setting tags for user "admin" to [administrator] ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl set_user_tags web_admin monitoring
Setting tags for user "web_admin" to [monitoring] ...
...done.

创建虚拟主机组

[root@linuxmaster1poc ~]# rabbitmqctl add_vhost /mcollective
Creating vhost "/mcollective" ...
...done.

设置用户访问虚拟主机组的权限

[root@linuxmaster1poc ~]# rabbitmqctl set_permissions -p "/mcollective" mc_rabbitmq  ".*" ".*" ".*"
Setting permissions for user "mc_rabbitmq" in vhost "/mcollective" ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl set_permissions -p "/mcollective" admin  ".*" ".*" ".*"
Setting permissions for user "admin" in vhost "/mcollective" ...
...done.
[root@linuxmaster1poc ~]# rabbitmqctl set_permissions -p "/mcollective" web_admin  ".*" ".*" ".*"
Setting permissions for user "web_admin" in vhost "/mcollective" ...
...done.

重启rabbitmq-server服务

[root@linuxmaster1poc ~]# /etc/init.d/rabbitmq-server restart
Restarting rabbitmq-server: SUCCESS
rabbitmq-server.

查看用户以及角色是否创建成功

[root@linuxmaster1poc ~]# rabbitmqctl list_users
Listing users ...
admin    [administrator]
mc_rabbitmq    []
web_admin    [monitoring]
...done.

查看虚拟主机组“/mcollective”中所有用户的权限

[root@linuxmaster1poc ~]# rabbitmqctl list_permissions -p "/mcollective"
Listing permissions in vhost "/mcollective" ...
admin    .*    .*    .*
mc_rabbitmq    .*    .*    .*
web_admin    .*    .*    .*
...done.
[root@linuxmaster1poc ~]#

4、登录http://192.168.100.120:15672/设置虚拟主机“/mcollective”的exchanges

默认配置

[root@linuxmaster1poc ~]# rabbitmqctl list_exchanges -p "/mcollective"
Listing exchanges ...
    direct
amq.direct    direct
amq.fanout    fanout
amq.headers    headers
amq.match    headers
amq.rabbitmq.trace    topic
amq.topic    topic
...done.

设置后更新配置

[root@linuxmaster1poc ~]# rabbitmqctl list_exchanges -p "/mcollective"
Listing exchanges ...
    direct
amq.direct    direct
amq.fanout    fanout
amq.headers    headers
amq.match    headers
amq.rabbitmq.trace    topic
amq.topic    topic
mcollective_broadcast    topic
mcollective_directed    direct
...done.

备注：可参考官网设置 https://www.rabbitmq.com/man/rabbitmqctl.1.man.html

二、配置MCollective:

1. 配置mcollective client端

[root@linuxmaster1poc testing]# cat /etc/mcollective/client.cfg 
topicprefix = /topic/
main_collective = mcollective
collectives = mcollective
libdir = /usr/libexec/mcollective
logger_type = console
#loglevel = debug
loglevel = warn
# Plugins
securityprovider = psk
plugin.psk = a36cd839414370e10fd281b8a38a4f48
direct_addressing = 1
connector = rabbitmq
plugin.rabbitmq.vhost = /mcollective  #虚拟主机
plugin.rabbitmq.pool.size = 2 #设置地址池里有两个mq
plugin.rabbitmq.initial_reconnect_delay = 0.01
plugin.rabbitmq.max_reconnect_delay = 30.0  #重连时间
plugin.rabbitmq.use_exponential_back_off = true
plugin.rabbitmq.back_off_multiplier = 2
plugin.rabbitmq.max_reconnect_attempts = 0
plugin.rabbitmq.randomize = false
plugin.rabbitmq.timeout = -1
plugin.rabbitmq.pool.1.host = 192.168.100.120
plugin.rabbitmq.pool.1.port = 61613
plugin.rabbitmq.pool.1.user = mc_rabbitmq
plugin.rabbitmq.pool.1.password = 123.com
plugin.rabbitmq.pool.1.ssl = false 
plugin.rabbitmq.pool.2.host = 192.168.100.121
plugin.rabbitmq.pool.2.port = 61613
plugin.rabbitmq.pool.2.user = mc_rabbitmq
plugin.rabbitmq.pool.2.password = 123.com
plugin.rabbitmq.pool.2.ssl = false 
# Facts
factsource = yaml
plugin.yaml = /etc/mcollective/facts.yaml

2. 配置mcollective server端

[root@linux57poc tmp]# cat /etc/mcollective/server.cfg
# --Global--
topicprefix = /topic/
main_collective = mcollective
collectives = mcollective
libdir = /usr/libexec/mcollective
logfile = /var/log/puppet/mcollective.log
loglevel = info
daemonize = 1
# --rabbitmq Plugins--
securityprovider = psk
plugin.psk = a36cd839414370e10fd281b8a38a4f48
direct_addressing = 1
connector = rabbitmq
plugin.rabbitmq.vhost = /mcollective 
plugin.rabbitmq.pool.size = 2
plugin.rabbitmq.initial_reconnect_delay = 0.01
plugin.rabbitmq.max_reconnect_delay = 30.0
plugin.rabbitmq.use_exponential_back_off = true
plugin.rabbitmq.back_off_multiplier = 2
plugin.rabbitmq.max_reconnect_attempts = 0
plugin.rabbitmq.randomize = false
plugin.rabbitmq.timeout = -1
plugin.rabbitmq.pool.1.host = 192.168.100.120
plugin.rabbitmq.pool.1.port = 61613
plugin.rabbitmq.pool.1.user = mc_rabbitmq
plugin.rabbitmq.pool.1.password = 123.com
plugin.rabbitmq.pool.1.ssl = false 
plugin.rabbitmq.pool.2.host = 192.168.100.121
plugin.rabbitmq.pool.2.port = 61613
plugin.rabbitmq.pool.2.user = mc_rabbitmq
plugin.rabbitmq.pool.2.password = 123.com
plugin.rabbitmq.pool.2.ssl = false 
# --Puppet provider specific options--
plugin.service.provider = puppet
plugin.service.puppet.hasstatus = true
plugin.service.puppet.hasrestart = true
plugin.puppet.command = puppet agent
plugin.puppet.splay = true
plugin.puppet.splaylimit = 30
plugin.puppet.config = /etc/puppet/puppet.conf
# --Facts--
factsource = yaml
##factsource = facter
plugin.yaml = /etc/mcollective/facts.yaml

三、高可用测试

特别注意： 节点mcollective的server.cfg中pool是有优先级的，默认数字小的生效，这点需要注意，也就是说当所有节点都连接在MQ2上的时候，启动MQ1，mco命令是无法使用的，因为它在运行的时候连接的是MQ1，而所有节点都连接在MQ2上。

1. 停止MQ1，查看切换状态

1.1 先看当前的节点连接状态

[root@linuxmaster1poc ~]# mco ping   #查看连接的节点
linux57poc                               time=69.46 ms
linux58poc                               time=70.05 ms
linux64poc                               time=70.59 ms
---- ping statistics ----
3 replies max: 70.59 min: 69.46 avg: 70.03 
[root@linuxmaster1poc ~]# mco shell "lsof -i:61613" #查看所有节点监听的端口情况，可以看到目前都连接在linuxmaster1poc上。
Do you really want to send this command unfiltered? (y/n): y
Discovering hosts using the mc method for 2 second(s) .... 3
Host: linux64poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    36625 root    6u  IPv4  27771      0t0  TCP linux64poc:40493->linuxmaster1poc:61613 (ESTABLISHED)
Host: linux58poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    11060 root    6u  IPv4  34046      0t0  TCP linux58poc:36295->linuxmaster1poc:61613 (ESTABLISHED)
Host: linux57poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE  DEVICE SIZE NODE NAME
ruby    18076 root    6u  IPv4 1351365       TCP linux57poc:24698->linuxmaster1poc:61613 (ESTABLISHED)
[root@linuxmaster1poc ~]# /etc/init.d/rabbitmq-server stop
Stopping rabbitmq-server: rabbitmq-server.

1.2 再次运行mco查看切换状态

[root@linuxmaster1poc ~]# mco ping
linux58poc                               time=73.54 ms
linux64poc                               time=74.61 ms
linux57poc                               time=75.39 ms
---- ping statistics ----
3 replies max: 75.39 min: 73.54 avg: 74.51 
[root@linuxmaster1poc ~]# mco shell "lsof -i:61613" 
Do you really want to send this command unfiltered? (y/n): y
Discovering hosts using the mc method for 2 second(s) .... 3
Host: linux58poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    11060 root    6u  IPv4  34046      0t0  TCP linux58poc:36295->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    11060 root    9u  IPv4  34137      0t0  TCP linux58poc:47200->linuxmaster2poc:61613 (ESTABLISHED)
Host: linux64poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    36625 root    6u  IPv4  27771      0t0  TCP linux64poc:40493->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    36625 root    8u  IPv4  27877      0t0  TCP linux64poc:37472->linuxmaster2poc:61613 (ESTABLISHED)
Host: linux57poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE  DEVICE SIZE NODE NAME
ruby    18076 root    9u  IPv4 1351484       TCP linux57poc:9309->linuxmaster2poc:61613 (ESTABLISHED)

通过日志查看

[root@linuxmaster1poc ~]# mco shell "lsof -i:61613"
Do you really want to send this command unfiltered? (y/n): y
Discovering hosts using the mc method for 2 second(s) .... 3
Host: linux58poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    11428 root    6u  IPv4  34283      0t0  TCP linux58poc:36300->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    11428 root    8u  IPv4  34338      0t0  TCP linux58poc:47205->linuxmaster2poc:61613 (ESTABLISHED)
Host: linux57poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE  DEVICE SIZE NODE NAME
ruby    18447 root    6u  IPv4 1351559       TCP linux57poc:59343->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    18447 root    8u  IPv4 1351622       TCP linux57poc:29757->linuxmaster2poc:61613 (ESTABLISHED)
Host: linux64poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    37054 root    4u  IPv4  28036      0t0  TCP linux64poc:37476->linuxmaster2poc:61613 (ESTABLISHED)
ruby    37054 root    6u  IPv4  27990      0t0  TCP linux64poc:40497->linuxmaster1poc:61613 (CLOSE_WAIT)

总结：可以看到之前的连接已经变成CLOSE_WAIT，新的连接被建立

2. 停止MQ2，启动MQ1 查看切换状态

[root@linuxmaster2poc rabbitmq]# /etc/init.d/rabbitmq-server stop
Stopping rabbitmq-server: rabbitmq-server.
[root@linux57poc service]# lsof -i:61613
COMMAND   PID USER   FD   TYPE  DEVICE SIZE NODE NAME
ruby    18447 root    6u  IPv4 1351559       TCP linux57poc:59343->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    18447 root    8u  IPv4 1351622       TCP linux57poc:29757->linuxmaster2poc:61613 (CLOSE_WAIT)
[root@linux58poc ~]# lsof -i:61613
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    11428 root    6u  IPv4  34283      0t0  TCP linux58poc:36300->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    11428 root    8u  IPv4  34338      0t0  TCP linux58poc:47205->linuxmaster2poc:61613 (CLOSE_WAIT)
[root@linux64poc ~]# lsof -i:61613
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    37054 root    4u  IPv4  28036      0t0  TCP linux64poc:37476->linuxmaster2poc:61613 (CLOSE_WAIT)
ruby    37054 root    6u  IPv4  27990      0t0  TCP linux64poc:40497->linuxmaster1poc:61613 (CLOSE_WAIT)
[root@linuxmaster1poc ~]# /etc/init.d/rabbitmq-server start
Starting rabbitmq-server: SUCCESS
rabbitmq-server.

根据 plugin.rabbitmq.max_reconnect_delay = 30.0，需要过最多30秒，mcollective服务端会重新建立连接请求

[root@linuxmaster1poc ~]# tailf  /var/log/rabbitmq/rabbit\@linuxmaster1poc.log
=INFO REPORT==== 24-Dec-2013::11:00:45 ===
accepting STOMP connection <0.332.0> (192.168.100.126:36316 -> 192.168.100.120:61613)
=INFO REPORT==== 24-Dec-2013::11:00:45 ===
accepting STOMP connection <0.348.0> (192.168.100.125:18945 -> 192.168.100.120:61613)
=INFO REPORT==== 24-Dec-2013::11:00:45 ===
accepting STOMP connection <0.382.0> (192.168.100.127:40513 -> 192.168.100.120:61613)
[root@linuxmaster1poc ~]# mco ping
linux58poc                               time=70.60 ms
linux57poc                               time=71.32 ms
linux64poc                               time=111.56 ms
---- ping statistics ----
3 replies max: 111.56 min: 70.60 avg: 84.49 
[root@linuxmaster1poc ~]# mco shell "lsof -i:61613"
Do you really want to send this command unfiltered? (y/n): y
Discovering hosts using the mc method for 2 second(s) .... 3
Host: linux58poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    11428 root    6u  IPv4  34283      0t0  TCP linux58poc:36300->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    11428 root    8u  IPv4  34338      0t0  TCP linux58poc:47205->linuxmaster2poc:61613 (CLOSE_WAIT)
ruby    11428 root   10u  IPv4  34444      0t0  TCP linux58poc:36316->linuxmaster1poc:61613 (ESTABLISHED)
Host: linux57poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE  DEVICE SIZE NODE NAME
ruby    18447 root   10u  IPv4 1351723       TCP linux57poc:18945->linuxmaster1poc:61613 (ESTABLISHED)
Host: linux64poc
Statuscode: 0
Output:
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
ruby    37054 root    4u  IPv4  28036      0t0  TCP linux64poc:37476->linuxmaster2poc:61613 (CLOSE_WAIT)
ruby    37054 root    6u  IPv4  27990      0t0  TCP linux64poc:40497->linuxmaster1poc:61613 (CLOSE_WAIT)
ruby    37054 root    9u  IPv4  28206      0t0  TCP linux64poc:40513->linuxmaster1poc:61613 (ESTABLISHED)

多MQ下MCollective高可用部署