ZooKeeper and BookKeeper administration

Pulsar relies on two external systems for essential tasks:

• ZooKeeper is responsible for a wide variety of configuration- and coordination-related tasks.
• BookKeeper is responsible for persistent storage of message data.ZooKeeper and BookKeeper are both open-source Apache projects.

Skip to the How Pulsar uses ZooKeeper and BookKeeper section below for a more schematic explanation of the role of these two systems in Pulsar.

ZooKeeper

Each Pulsar instance relies on two separate ZooKeeper quorums.

• Local ZooKeeper operates at the cluster level and provides cluster-specific configuration management and coordination. Each Pulsar cluster needs to have a dedicated ZooKeeper cluster.
• Configuration Store operates at the instance level and provides configuration management for the entire system (and thus across clusters). The configuration store quorum can be provided by an independent cluster of machines or by the same machines used by local ZooKeeper.

Deploying local ZooKeeper

ZooKeeper manages a variety of essential coordination- and configuration-related tasks for Pulsar.

Deploying a Pulsar instance requires you to stand up one local ZooKeeper cluster per Pulsar cluster.

To begin, add all ZooKeeper servers to the quorum configuration specified in the conf/zookeeper.conf file. Add a server.N line for each node in the cluster to the configuration, where N is the number of the ZooKeeper node. Here's an example for a three-node cluster:

server.1=zk1.us-west.example.com:2888:3888
server.2=zk2.us-west.example.com:2888:3888
server.3=zk3.us-west.example.com:2888:3888

On each host, you need to specify the ID of the node in each node's myid file, which is in each server's data/zookeeper folder by default (this can be changed via the dataDir parameter).

See the Multi-server setup guide in the ZooKeeper documentation for detailed info on myid and more.

On a ZooKeeper server at zk1.us-west.example.com, for example, you could set the myid value like this:

$ mkdir -p data/zookeeper
$ echo 1 > data/zookeeper/myid

On zk2.us-west.example.com the command would be echo 2 > data/zookeeper/myid and so on.

Once each server has been added to the zookeeper.conf configuration and has the appropriate myid entry, you can start ZooKeeper on all hosts (in the background, using nohup) with the pulsar-daemon CLI tool:

$ bin/pulsar-daemon start zookeeper

Deploying configuration store

The ZooKeeper cluster configured and started up in the section above is a local ZooKeeper cluster used to manage a single Pulsar cluster. In addition to a local cluster, however, a full Pulsar instance also requires a configuration store for handling some instance-level configuration and coordination tasks.

If you're deploying a single-cluster instance, then you will not need a separate cluster for the configuration store. If, however, you're deploying a multi-cluster instance, then you should stand up a separate ZooKeeper cluster for configuration tasks.

Single-cluster Pulsar instance

If your Pulsar instance will consist of just one cluster, then you can deploy a configuration store on the same machines as the local ZooKeeper quorum but running on different TCP ports.

To deploy a ZooKeeper configuration store in a single-cluster instance, add the same ZooKeeper servers used by the local quorom to the configuration file in conf/global_zookeeper.conf using the same method for local ZooKeeper, but make sure to use a different port (2181 is the default for ZooKeeper). Here's an example that uses port 2184 for a three-node ZooKeeper cluster:

clientPort=2184
server.1=zk1.us-west.example.com:2185:2186
server.2=zk2.us-west.example.com:2185:2186
server.3=zk3.us-west.example.com:2185:2186

As before, create the myid files for each server on data/global-zookeeper/myid.

Multi-cluster Pulsar instance

When deploying a global Pulsar instance, with clusters distributed across different geographical regions, the configuration store serves as a highly available and strongly consistent metadata store that can tolerate failures and partitions spanning whole regions.

The key here is to make sure the ZK quorum members are spread across at least 3regions and that other regions are running as observers.

Again, given the very low expected load on the configuration store servers, we canshare the same hosts used for the local ZooKeeper quorum.

For example, let's assume a Pulsar instance with the following clusters us-west,us-east, us-central, eu-central, ap-south. Also let's assume, each clusterwill have its own local ZK servers named such as

zk[1-3].${CLUSTER}.example.com

In this scenario we want to pick the quorum participants from few clusters andlet all the others be ZK observers. For example, to form a 7 servers quorum, wecan pick 3 servers from us-west, 2 from us-central and 2 from us-east.

This will guarantee that writes to configuration store will be possible even if oneof these regions is unreachable.

The ZK configuration in all the servers will look like:

clientPort=2184
server.1=zk1.us-west.example.com:2185:2186
server.2=zk2.us-west.example.com:2185:2186
server.3=zk3.us-west.example.com:2185:2186
server.4=zk1.us-central.example.com:2185:2186
server.5=zk2.us-central.example.com:2185:2186
server.6=zk3.us-central.example.com:2185:2186:observer
server.7=zk1.us-east.example.com:2185:2186
server.8=zk2.us-east.example.com:2185:2186
server.9=zk3.us-east.example.com:2185:2186:observer
server.10=zk1.eu-central.example.com:2185:2186:observer
server.11=zk2.eu-central.example.com:2185:2186:observer
server.12=zk3.eu-central.example.com:2185:2186:observer
server.13=zk1.ap-south.example.com:2185:2186:observer
server.14=zk2.ap-south.example.com:2185:2186:observer
server.15=zk3.ap-south.example.com:2185:2186:observer

Additionally, ZK observers will need to have:

peerType=observer

Starting the service

Once your configuration store configuration is in place, you can start up the service using pulsar-daemon

$ bin/pulsar-daemon start configuration-store

ZooKeeper configuration

In Pulsar, ZooKeeper configuration is handled by two separate configuration files found in the conf directory of your Pulsar installation: conf/zookeeper.conf for local ZooKeeper and conf/global-zookeeper.conf for configuration store.

Local ZooKeeper

Configuration for local ZooKeeper is handled by the conf/zookeeper.conf file. The table below shows the available parameters:

Configuration Store

Configuration for configuration store is handled by the conf/global-zookeeper.conf file. The table below shows the available parameters:

BookKeeper

BookKeeper is responsible for all durable message storage in Pulsar. BookKeeper is a distributed write-ahead log WAL system that guarantees read consistency of independent message logs called ledgers. Individual BookKeeper servers are also called bookies.

For a guide to managing message persistence, retention, and expiry in Pulsar, see this cookbook.

Deploying BookKeeper

BookKeeper provides persistent message storage for Pulsar.

Each Pulsar broker needs to have its own cluster of bookies. The BookKeeper cluster shares a local ZooKeeper quorum with the Pulsar cluster.

Configuring bookies

BookKeeper bookies can be configured using the conf/bookkeeper.conf configuration file. The most important aspect of configuring each bookie is ensuring that the zkServers parameter is set to the connection string for the Pulsar cluster's local ZooKeeper.

Starting up bookies

You can start up a bookie in two ways: in the foreground or as a background daemon.

To start up a bookie in the foreground, use the bookeeper CLI tool:

$ bin/bookkeeper bookie

To start a bookie in the background, use the pulsar-daemon CLI tool:

$ bin/pulsar-daemon start bookie

You can verify that the bookie is working properly using the bookiesanity command for the BookKeeper shell:

$ bin/bookkeeper shell bookiesanity

This will create a new ledger on the local bookie, write a few entries, read them back and finally delete the ledger.

Hardware considerations

Bookie hosts are responsible for storing message data on disk. In order for bookies to provide optimal performance, it's essential that they have a suitable hardware configuration. There are two key dimensions to bookie hardware capacity:

• Disk I/O capacity read/write

• Storage capacityMessage entries written to bookies are always synced to disk before returning an acknowledgement to the Pulsar broker. To ensure low write latency, BookKeeper isdesigned to use multiple devices:

• A journal to ensure durability. For sequential writes, it's critical to have fast fsync operations on bookie hosts. Typically, small and fast solid-state drives (SSDs) should suffice, or hard disk drives (HDDs) with a RAIDs controller and a battery-backed write cache. Both solutions can reach fsync latency of ~0.4 ms.

• A ledger storage device is where data is stored until all consumers have acknowledged the message. Writes will happen in the background, so write I/O is not a big concern. Reads will happen sequentially most of the time and the backlog is drained only in case of consumer drain. To store large amounts of data, a typical configuration will involve multiple HDDs with a RAID controller.

Configuring BookKeeper

Configurable parameters for BookKeeper bookies can be found in the conf/bookkeeper.conf file.

Minimum configuration changes required in conf/bookkeeper.conf are:

# Change to point to journal disk mount point
journalDirectory=data/bookkeeper/journal
# Point to ledger storage disk mount point
ledgerDirectories=data/bookkeeper/ledgers
# Point to local ZK quorum
zkServers=zk1.example.com:2181,zk2.example.com:2181,zk3.example.com:2181
# Change the ledger manager type
ledgerManagerType=hierarchical

To change the zookeeper root path used by Bookkeeper, use zkLedgersRootPath=/MY-PREFIX/ledgers instead of zkServers=localhost:2181/MY-PREFIX

Consult the official BookKeeper docs for more information about BookKeeper.

BookKeeper persistence policies

In Pulsar, you can set persistence policies, at the namespace level, that determine how BookKeeper handles persistent storage of messages. Policies determine four things:

• The number of acks (guaranteed copies) to wait for each ledger entry
• The number of bookies to use for a topic
• How many writes to make for each ledger entry
• The throttling rate for mark-delete operations

Set persistence policies

You can set persistence policies for BookKeeper at the namespace level.

pulsar-admin

Use the set-persistence subcommand and specify a namespace as well as any policies that you want to apply. The available flags are:

Example

$ pulsar-admin namespaces set-persistence my-tenant/my-ns \
  --bookkeeper-ack-quorom 3 \
  --bookeeper-ensemble 2

REST API

POST/admin/v2/namespaces/:tenant/:namespace/persistence

Java

int bkEnsemble = 2;
int bkQuorum = 3;
int bkAckQuorum = 2;
double markDeleteRate = 0.7;
PersistencePolicies policies =
  new PersistencePolicies(ensemble, quorum, ackQuorum, markDeleteRate);
admin.namespaces().setPersistence(namespace, policies);

List persistence policies

You can see which persistence policy currently applies to a namespace.

pulsar-admin

Use the get-persistence subcommand and specify the namespace.

Example

$ pulsar-admin namespaces get-persistence my-tenant/my-ns
{
  "bookkeeperEnsemble": 1,
  "bookkeeperWriteQuorum": 1,
  "bookkeeperAckQuorum", 1,
  "managedLedgerMaxMarkDeleteRate": 0
}

REST API

GET/admin/v2/namespaces/:tenant/:namespace/persistence

Java

PersistencePolicies policies = admin.namespaces().getPersistence(namespace);

How Pulsar uses ZooKeeper and BookKeeper

This diagram illustrates the role of ZooKeeper and BookKeeper in a Pulsar cluster:

Each Pulsar cluster consists of one or more message brokers. Each broker relies on an ensemble of bookies.