Deploying Presto

Installing Presto

Download the Presto server tarball, presto-server-0.285.1.tar.gz, and unpack it. The tarball will contain a single top-level directory, presto-server-0.285.1, which we will call the installation directory.

Presto needs a data directory for storing logs, etc. We recommend creating a data directory outside of the installation directory, which allows it to be easily preserved when upgrading Presto.

Configuring Presto

Create an etc directory inside the installation directory. This will hold the following configuration:

  • Node Properties: environmental configuration specific to each node

  • JVM Config: command line options for the Java Virtual Machine

  • Config Properties: configuration for the Presto server. See the Properties Reference for available configuration properties.

  • Catalog Properties: configuration for Connectors (data sources). The available catalog configuration properties for a connector are described in the respective connector documentation.

Node Properties

The node properties file, etc/node.properties, contains configuration specific to each node. A node is a single installed instance of Presto on a machine. This file is typically created by the deployment system when Presto is first installed. The following is a minimal etc/node.properties:

  1. node.environment=production
  2. node.id=ffffffff-ffff-ffff-ffff-ffffffffffff
  3. node.data-dir=/var/presto/data

The above properties are described below:

  • node.environment: The name of the environment. All Presto nodes in a cluster must have the same environment name.

  • node.id: The unique identifier for this installation of Presto. This must be unique for every node. This identifier should remain consistent across reboots or upgrades of Presto. If running multiple installations of Presto on a single machine (i.e. multiple nodes on the same machine), each installation must have a unique identifier.

  • node.data-dir: The location (filesystem path) of the data directory. Presto will store logs and other data here.

JVM Config

The JVM config file, etc/jvm.config, contains a list of command line options used for launching the Java Virtual Machine. The format of the file is a list of options, one per line. These options are not interpreted by the shell, so options containing spaces or other special characters should not be quoted.

The following provides a good starting point for creating etc/jvm.config:

  1. -server
  2. -Xmx16G
  3. -XX:+UseG1GC
  4. -XX:G1HeapRegionSize=32M
  5. -XX:+UseGCOverheadLimit
  6. -XX:+ExplicitGCInvokesConcurrent
  7. -XX:+HeapDumpOnOutOfMemoryError
  8. -XX:+ExitOnOutOfMemoryError

Because an OutOfMemoryError will typically leave the JVM in an inconsistent state, we write a heap dump (for debugging) and forcibly terminate the process when this occurs.

Config Properties

The config properties file, etc/config.properties, contains the configuration for the Presto server. Every Presto server can function as both a coordinator and a worker, but dedicating a single machine to only perform coordination work provides the best performance on larger clusters.

The following is a minimal configuration for the coordinator:

  1. coordinator=true
  2. node-scheduler.include-coordinator=false
  3. http-server.http.port=8080
  4. query.max-memory=50GB
  5. query.max-memory-per-node=1GB
  6. discovery-server.enabled=true
  7. discovery.uri=http://example.net:8080

And this is a minimal configuration for the workers:

  1. coordinator=false
  2. http-server.http.port=8080
  3. query.max-memory=50GB
  4. query.max-memory-per-node=1GB
  5. discovery.uri=http://example.net:8080

Alternatively, if you are setting up a single machine for testing that will function as both a coordinator and worker, use this configuration:

  1. coordinator=true
  2. node-scheduler.include-coordinator=true
  3. http-server.http.port=8080
  4. query.max-memory=5GB
  5. query.max-memory-per-node=1GB
  6. discovery-server.enabled=true
  7. discovery.uri=http://example.net:8080

If single coordinator is not sufficient, disaggregated coordinator setup can be used which supports multiple coordinator using below minimal configuration:

  • Resource Manager

Minimum 1 resource manager is needed for a cluster and more can be added in to the cluster with each behaving as primary.

  1. resource-manager=true
  2. resource-manager-enabled=true
  3. coordinator=false
  4. node-scheduler.include-coordinator=false
  5. http-server.http.port=8080
  6. thrift.server.port=8081
  7. query.max-memory=50GB
  8. query.max-memory-per-node=1GB
  9. discovery-server.enabled=true
  10. discovery.uri=http://example.net:8080 (Point to resource manager host/vip)
  11. thrift.server.ssl.enabled=true
  • Coordinator

Cluster supports pool of coordinators. Each coordinator will run subset of queries in a cluster.

  1. coordinator=true
  2. node-scheduler.include-coordinator=false
  3. http-server.http.port=8080
  4. query.max-memory=50GB
  5. query.max-memory-per-node=1GB
  6. discovery.uri=http://example.net:8080 (Point to resource manager host/vip)
  7. resource-manager-enabled=true
  • Worker

Cluster supports pool of workers. They send their heartbeats to resource manager.

  1. coordinator=false
  2. http-server.http.port=8080
  3. query.max-memory=50GB
  4. query.max-memory-per-node=1GB
  5. discovery.uri=http://example.net:8080 (Point to resource manager host/vip)
  6. resource-manager-enabled=true

These properties require some explanation:

  • resource manager: Aggregates data from coordinators and workers and constructs a global view of the cluster. For more details read the concepts.

  • coordinator: Allow this Presto instance to function as a coordinator (accept queries from clients and manage query execution).

  • node-scheduler.include-coordinator: Allow scheduling work on the coordinator. For larger clusters, processing work on the coordinator can impact query performance because the machine’s resources are not available for the critical task of scheduling, managing and monitoring query execution.

  • http-server.http.port: Specifies the port for the HTTP server. Presto uses HTTP for all communication, internal and external.

  • query.max-memory: The maximum amount of distributed memory that a query may use.

  • query.max-memory-per-node: The maximum amount of user memory that a query may use on any one machine.

  • discovery-server.enabled: Presto uses the Discovery service to find all the nodes in the cluster. Every Presto instance will register itself with the Discovery service on startup. In order to simplify deployment and avoid running an additional service, the Presto coordinator can run an embedded version of the Discovery service. It shares the HTTP server with Presto and thus uses the same port.

  • discovery.uri: The URI to the Discovery server. Because we have enabled the embedded version of Discovery in the Presto coordinator, this should be the URI of the Presto coordinator. Replace example.net:8080 to match the host and port of the Presto coordinator. This URI must not end in a slash.

The following flags can help one tune the disaggregated coordinator cluster’s resource groups to the desired consistency:

  • concurrency-threshold-to-enable-resource-group-refresh (default: 1.0)

    Configure coordinator to wait for the next resource group update before allowing more queries to run on any given resource group, if running queries reached the configured limit.

    Default value is 1.0. It means once any resource group is running its max allowed queries, the coordinator has to wait for an update from the resource manager before allowing new queries to run on the given resource group. To achieve stronger consistency, reduce the percentage to lower value.

  • resource-group-runtimeinfo-refresh-interval (default: 100 ms)

    This configuration helps tune coordinator periodic polling intervals of cluster level resource group usage from the resource manager.

You may also wish to set the following properties:

  • jmx.rmiregistry.port: Specifies the port for the JMX RMI registry. JMX clients should connect to this port.

  • jmx.rmiserver.port: Specifies the port for the JMX RMI server. Presto exports many metrics that are useful for monitoring via JMX.

See also Resource Groups.

Log Levels

The optional log levels file, etc/log.properties, allows setting the minimum log level for named logger hierarchies. Every logger has a name, which is typically the fully qualified name of the class that uses the logger. Loggers have a hierarchy based on the dots in the name (like Java packages). For example, consider the following log levels file:

  1. com.facebook.presto=INFO

This would set the minimum level to INFO for both com.facebook.presto.server and com.facebook.presto.hive. The default minimum level is INFO (thus the above example does not actually change anything). There are four levels: DEBUG, INFO, WARN and ERROR.

Catalog Properties

Presto accesses data via connectors, which are mounted in catalogs. The connector provides all of the schemas and tables inside of the catalog. For example, the Hive connector maps each Hive database to a schema, so if the Hive connector is mounted as the hive catalog, and Hive contains a table clicks in database web, that table would be accessed in Presto as hive.web.clicks.

Catalogs are registered by creating a catalog properties file in the etc/catalog directory. For example, create etc/catalog/jmx.properties with the following contents to mount the jmx connector as the jmx catalog:

  1. connector.name=jmx

See Connectors for more information about configuring connectors.

Running Presto

The installation directory contains the launcher script in bin/launcher. Presto can be started as a daemon by running the following:

  1. bin/launcher start

Alternatively, it can be run in the foreground, with the logs and other output being written to stdout/stderr (both streams should be captured if using a supervision system like daemontools):

  1. bin/launcher run

Run the launcher with --help to see the supported commands and command line options. In particular, the --verbose option is very useful for debugging the installation.

After launching, you can find the log files in var/log:

  • launcher.log: This log is created by the launcher and is connected to the stdout and stderr streams of the server. It will contain a few log messages that occur while the server logging is being initialized and any errors or diagnostics produced by the JVM.

  • server.log: This is the main log file used by Presto. It will typically contain the relevant information if the server fails during initialization. It is automatically rotated and compressed.

  • http-request.log: This is the HTTP request log which contains every HTTP request received by the server. It is automatically rotated and compressed.

An Example Deployment on Laptop Querying S3

This section shows how to run Presto connecting to Hive MetaStore on a single laptop to query data in an S3 bucket.

Configure Hive MetaStore

Download and extract the binary tarball of Hive. For example, download and untar apache-hive-<VERSION>-bin.tar.gz .

You only need to launch Hive Metastore to serve Presto catalog information such as table schema and partition location. If it is the first time to launch the Hive Metastore, prepare corresponding configuration files and environment, also initialize a new Metastore:

  1. export HIVE_HOME=`pwd`
  2. cp conf/hive-default.xml.template conf/hive-site.xml
  3. mkdir -p hcatalog/var/log/
  4. bin/schematool -dbType derby -initSchema

If you want to access AWS S3, append the following lines in conf/hive-env.sh. Hive needs the corresponding jars to access files with s3a:// addresses, and AWS credentials as well to access an S3 bucket (even it is public). These jars can be found in Hadoop distribution (e.g., under ${HADOOP_HOME}/share/hadoop/tools/lib/), or download from maven central repository.

  1. export HIVE_AUX_JARS_PATH=/path/to/aws-java-sdk-core-<version>.jar:$/path/to/aws-java-sdk-s3-<version>.jar:/path/to/hadoop-aws-<version>.jar
  2. export AWS_ACCESS_KEY_ID=<Your AWS Access Key>
  3. export AWS_SECRET_ACCESS_KEY=<Your AWS Secret Key>

Start a Hive Metastore which will run in the background and listen on port 9083 (by default):

  1. hcatalog/sbin/hcat_server.sh start

The output is similar to the following:

  1. Started metastore server init, testing if initialized correctly...
  2. Metastore initialized successfully on port[9083].

To verify if the MetaStore is running, check the Hive Metastore logs at hcatalog/var/log/

Configure Presto

Create a configuration file etc/config.properties to based on Config Properties. For example, follow the minimal configuration to run Presto on your laptop:

  1. coordinator=true
  2. node-scheduler.include-coordinator=true
  3. http-server.http.port=8080
  4. discovery-server.enabled=true
  5. discovery.uri=http://localhost:8080

Create etc/jvm.config according to JVM Config and etc/node.properties according to Node Properties.

Lastly, configure Presto Hive connector in etc/catalog/hive.properties, pointing to the Hive Metastore service just started. Include AWS credentials here again if Presto needs to read input files from S3.

  1. connector.name=hive-hadoop2
  2. hive.metastore.uri=thrift://localhost:9083
  3. hive.s3.aws-access-key=<Your AWS Access Key>
  4. hive.s3.aws-secret-key=<Your AWS Secret Key>

Run the Presto server:

  1. ./bin/launcher start

An Example Deployment with Docker

Let’s take a look at getting a Docker image together for Presto (though they already exist on Dockerhub, e.g. ahanaio/prestodb-sandbox). We can see below how relatively easy it is to get Presto up and running. For demonstration purposes, this configuration is a single-node Presto installation where the scheduler will include the Coordinator as a Worker. We will configure one catalog, TPCH.

For the Dockerfile, we download Presto, copy some configuration files in a local etc directory into the image, and specify an entry point to run the server.

  1. FROM openjdk:8-jre
  3. # Presto version will be passed in at build time
  4. ARG PRESTO_VERSION
  6. # Set the URL to download
  7. ARG PRESTO_BIN=https://repo1.maven.org/maven2/com/facebook/presto/presto-server/${PRESTO_VERSION}/presto-server-${PRESTO_VERSION}.tar.gz
  9. # Update the base image OS and install wget and python
  10. RUN apt-get update
  11. RUN apt-get install -y wget python less
  13. # Download Presto and unpack it to /opt/presto
  14. RUN wget --quiet ${PRESTO_BIN}
  15. RUN mkdir -p /opt
  16. RUN tar -xf presto-server-${PRESTO_VERSION}.tar.gz -C /opt
  17. RUN rm presto-server-${PRESTO_VERSION}.tar.gz
  18. RUN ln -s /opt/presto-server-${PRESTO_VERSION} /opt/presto
  20. # Copy configuration files on the host into the image
  21. COPY etc /opt/presto/etc
  23. # Download the Presto CLI and put it in the image
  24. RUN wget --quiet https://repo1.maven.org/maven2/com/facebook/presto/presto-cli/${PRESTO_VERSION}/presto-cli-${PRESTO_VERSION}-executable.jar
  25. RUN mv presto-cli-${PRESTO_VERSION}-executable.jar /usr/local/bin/presto
  26. RUN chmod +x /usr/local/bin/presto
  28. # Specify the entrypoint to start
  29. ENTRYPOINT /opt/presto/bin/launcher run

There are four files in the etc/ folder to configure Presto, along with one catalog in etc/catalog/. A catalog defines the configuration of a connector, and the catalog is named after the file name (minus the .properties extension). You can have multiple catalogs for each Presto installation, including multiple catalogs using the same connector; they just need a different filename. The files are:

  1. etc/
  2. ├── catalog
  3. │   └── tpch.properties  # Configures the TPCH connector to generate data
  4. ├── config.properties    # Presto instance configuration properties
  5. ├── jvm.config           # JVM configuration for the process
  6. ├── log.properties       # Logging configuration
  7. └── node.properties      # Node-specific configuration properties

The four files directly under etc are documented above (using the single-node Coordinator configuration for config.properties). The file called etc/catalog/tpch.properties is used to defined the tpch catalog. Each connector has their own set of configuration properties that are specific to the connector. You can find a connector’s configuration properties documented along with the connector. The TPCH connector has no special configuration, so we just specify the name of the connector for the catalog, also tpch.

etc/catalog/tpch.properties

  1. connector.name=tpch

We’re now ready to build our Docker container specifying the version and then start Presto. The latest version of Presto is currently 0.285.1.

  1. docker build --build-arg PRESTO_VERSION=<see releases for latest version> . -t prestodb:latest
  2. docker run --name presto prestodb:latest

You’ll see a series of logs as Presto starts, ending with SERVER STARTED signaling that it is ready to receive queries. We’ll use the Presto CLI to connect to Presto that we put inside the image using a separate Terminal window.

  1. docker exec -it presto presto

We can now execute a query against the tpch catalog.

  1. presto> SELECT
  2.      ->   l.returnflag,
  3.      ->   l.linestatus,
  4.      ->   sum(l.quantity)                                       AS sum_qty,
  5.      ->   sum(l.extendedprice)                                  AS sum_base_price,
  6.      ->   sum(l.extendedprice * (1 - l.discount))               AS sum_disc_price,
  7.      ->   sum(l.extendedprice * (1 - l.discount) * (1 + l.tax)) AS sum_charge,
  8.      ->   avg(l.quantity)                                       AS avg_qty,
  9.      ->   avg(l.extendedprice)                                  AS avg_price,
  10.      ->   avg(l.discount)                                       AS avg_disc,
  11.      ->   count(*)                                              AS count_order
  12.      -> FROM
  13.      ->   tpch.sf1.lineitem AS l
  14.      -> WHERE
  15.      ->   l.shipdate <= DATE '1998-12-01' - INTERVAL '90' DAY
  16.      -> GROUP BY
  17.      ->   l.returnflag,
  18.      ->   l.linestatus
  19.      -> ORDER BY
  20.      ->   l.returnflag,
  21.      ->   l.linestatus;
  22.  returnflag | linestatus |   sum_qty   |    sum_base_price     |    sum_disc_price     |      sum_charge       |      avg_qty       |     avg_price     |       avg_disc       | count_order
  23. ------------+------------+-------------+-----------------------+-----------------------+-----------------------+--------------------+-------------------+----------------------+-------------
  24.  A          | F          | 3.7734107E7 |  5.658655440072982E10 | 5.3758257134869644E10 |  5.590906522282741E10 | 25.522005853257337 | 38273.12973462155 |  0.04998529583846928 |     1478493
  25.  N          | F          |    991417.0 |  1.4875047103800006E9 |  1.4130821680540998E9 |   1.469649223194377E9 | 25.516471920522985 | 38284.46776084832 |  0.05009342667421586 |       38854
  26.  N          | O          |  7.447604E7 | 1.1170172969773982E11 | 1.0611823030760503E11 | 1.1036704387249734E11 |  25.50222676958499 | 38249.11798890821 |   0.0499965860537345 |     2920374
  27.  R          | F          | 3.7719753E7 |   5.65680413808999E10 |  5.374129268460365E10 |  5.588961911983193E10 |  25.50579361269077 | 38250.85462609959 | 0.050009405830198916 |     1478870
  28. (4 rows)
  30. Query 20200625_171123_00000_xqmp4, FINISHED, 1 node
  31. Splits: 56 total, 56 done (100.00%)
  32. 0:05 [6M rows, 0B] [1.1M rows/s, 0B/s]