10.2. 運算子

The specific operator that is referenced by an operator expression is determined using the following procedure. Note that this procedure is indirectly affected by the precedence of the operators involved, since that will determine which sub-expressions are taken to be the inputs of which operators. SeeSection 4.1.6for more information.

Operator Type Resolution

  1. Select the operators to be considered from thepg_operatorsystem catalog. If a non-schema-qualified operator name was used (the usual case), the operators considered are those with the matching name and argument count that are visible in the current search path (seeSection 5.8.3). If a qualified operator name was given, only operators in the specified schema are considered.
    1. If the search path finds multiple operators with identical argument types, only the one appearing earliest in the path is considered. Operators with different argument types are considered on an equal footing regardless of search path position.
  2. Check for an operator accepting exactly the input argument types. If one exists (there can be only one exact match in the set of operators considered), use it.
    1. If one argument of a binary operator invocation is of theunknowntype, then assume it is the same type as the other argument for this check. Invocations involving twounknowninputs, or a unary operator with anunknowninput, will never find a match at this step.
    2. If one argument of a binary operator invocation is of theunknowntype and the other is of a domain type, next check to see if there is an operator accepting exactly the domain’s base type on both sides; if so, use it.
  3. Look for the best match.
    1. Discard candidate operators for which the input types do not match and cannot be converted (using an implicit conversion) to match.unknownliterals are assumed to be convertible to anything for this purpose. If only one candidate remains, use it; else continue to the next step.
    2. If any input argument is of a domain type, treat it as being of the domain’s base type for all subsequent steps. This ensures that domains act like their base types for purposes of ambiguous-operator resolution.
    3. Run through all candidates and keep those with the most exact matches on input types. Keep all candidates if none have exact matches. If only one candidate remains, use it; else continue to the next step.
    4. Run through all candidates and keep those that accept preferred types (of the input data type’s type category) at the most positions where type conversion will be required. Keep all candidates if none accept preferred types. If only one candidate remains, use it; else continue to the next step.
    5. If any input arguments areunknown, check the type categories accepted at those argument positions by the remaining candidates. At each position, select thestringcategory if any candidate accepts that category. (This bias towards string is appropriate since an unknown-type literal looks like a string.) Otherwise, if all the remaining candidates accept the same type category, select that category; otherwise fail because the correct choice cannot be deduced without more clues. Now discard candidates that do not accept the selected type category. Furthermore, if any candidate accepts a preferred type in that category, discard candidates that accept non-preferred types for that argument. Keep all candidates if none survive these tests. If only one candidate remains, use it; else continue to the next step.
    6. If there are bothunknownand known-type arguments, and all the known-type arguments have the same type, assume that theunknownarguments are also of that type, and check which candidates can accept that type at theunknown-argument positions. If exactly one candidate passes this test, use it. Otherwise, fail.

Some examples follow.

Example 10.1. Factorial Operator Type Resolution

There is only one factorial operator (postfix!) defined in the standard catalog, and it takes an argument of typebigint. The scanner assigns an initial type ofintegerto the argument in this query expression:

  1. SELECT 40 ! AS "40 factorial";
  3.                    40 factorial
  4. --------------------------------------------------
  5.  815915283247897734345611269596115894272000000000
  6. (1 row)

So the parser does a type conversion on the operand and the query is equivalent to:

  1. SELECT CAST(40 AS bigint) ! AS "40 factorial";

Example 10.2. String Concatenation Operator Type Resolution

A string-like syntax is used for working with string types and for working with complex extension types. Strings with unspecified type are matched with likely operator candidates.

An example with one unspecified argument:

  1. SELECT text 'abc' || 'def' AS "text and unknown";
  3.  text and unknown
  4. ------------------
  5.  abcdef
  6. (1 row)

In this case the parser looks to see if there is an operator takingtextfor both arguments. Since there is, it assumes that the second argument should be interpreted as typetext.

Here is a concatenation of two values of unspecified types:

  1. SELECT 'abc' || 'def' AS "unspecified";
  3.  unspecified
  4. -------------
  5.  abcdef
  6. (1 row)

In this case there is no initial hint for which type to use, since no types are specified in the query. So, the parser looks for all candidate operators and finds that there are candidates accepting both string-category and bit-string-category inputs. Since string category is preferred when available, that category is selected, and then the preferred type for strings,text, is used as the specific type to resolve the unknown-type literals as.

Example 10.3. Absolute-Value and Negation Operator Type Resolution

ThePostgreSQLoperator catalog has several entries for the prefix operator@, all of which implement absolute-value operations for various numeric data types. One of these entries is for typefloat8, which is the preferred type in the numeric category. Therefore,PostgreSQLwill use that entry when faced with anunknowninput:

  1. SELECT @ '-4.5' AS "abs";
  2.  abs
  3. -----
  4.  4.5
  5. (1 row)

Here the system has implicitly resolved the unknown-type literal as typefloat8before applying the chosen operator. We can verify thatfloat8and not some other type was used:

  1. SELECT @ '-4.5e500' AS "abs";
  3. ERROR:  "-4.5e500" is out of range for type double precision

On the other hand, the prefix operator~(bitwise negation) is defined only for integer data types, not forfloat8. So, if we try a similar case with~, we get:

  1. SELECT ~ '20' AS "negation";
  3. ERROR:  operator is not unique: ~ "unknown"
  4. HINT:  Could not choose a best candidate operator. You might need to add
  5. explicit type casts.

This happens because the system cannot decide which of the several possible~operators should be preferred. We can help it out with an explicit cast:

  1. SELECT ~ CAST('20' AS int8) AS "negation";
  3.  negation
  4. ----------
  5.       -21
  6. (1 row)

Example 10.4. Array Inclusion Operator Type Resolution

Here is another example of resolving an operator with one known and one unknown input:

  1. SELECT array[1,2] 
  2. <
  3. @ '{1,2,3}' as "is subset";
  5.  is subset
  6. -----------
  7.  t
  8. (1 row)

ThePostgreSQLoperator catalog has several entries for the infix operator<@, but the only two that could possibly accept an integer array on the left-hand side are array inclusion (anyarray<@anyarray) and range inclusion (anyelement<@anyrange). Since none of these polymorphic pseudo-types (seeSection 8.20) are considered preferred, the parser cannot resolve the ambiguity on that basis. However,Step 3.ftells it to assume that the unknown-type literal is of the same type as the other input, that is, integer array. Now only one of the two operators can match, so array inclusion is selected. (Had range inclusion been selected, we would have gotten an error, because the string does not have the right format to be a range literal.)

Example 10.5. Custom Operator on a Domain Type

Users sometimes try to declare operators applying just to a domain type. This is possible but is not nearly as useful as it might seem, because the operator resolution rules are designed to select operators applying to the domain’s base type. As an example consider

  1. CREATE DOMAIN mytext AS text CHECK(...);
  2. CREATE FUNCTION mytext_eq_text (mytext, text) RETURNS boolean AS ...;
  3. CREATE OPERATOR = (procedure=mytext_eq_text, leftarg=mytext, rightarg=text);
  4. CREATE TABLE mytable (val mytext);
  6. SELECT * FROM mytable WHERE val = 'foo';

This query will not use the custom operator. The parser will first see if there is amytext=mytextoperator (Step 2.a), which there is not; then it will consider the domain’s base typetext, and see if there is atext=textoperator (Step 2.b), which there is; so it resolves theunknown-type literal astextand uses thetext=textoperator. The only way to get the custom operator to be used is to explicitly cast the literal:

  1. SELECT * FROM mytable WHERE val = text 'foo';

so that themytext=textoperator is found immediately according to the exact-match rule. If the best-match rules are reached, they actively discriminate against operators on domain types. If they did not, such an operator would create too many ambiguous-operator failures, because the casting rules always consider a domain as castable to or from its base type, and so the domain operator would be considered usable in all the same cases as a similarly-named operator on the base type.