fsck

Similar to a file system check, the fsck command will scan and, optionally, attempt to repair problems with data points in OpenTSDB’s data table. The fsck command only operates on the tsdb storage table, scanning the entire data table or any rows of data that match on a given query. Fsck can be used to repair errors and also reclaim space by compacting rows that were not compacted by a TSD and variable-length encoding data points from previous versions of OpenTSDB.

By default, running fsck will only report errors found by the query. No changes are made to the underlying data unless you supply the --fix or --fix-all flags. Generally you should run an fsck without a fix flag first and verify issues found in the log file. If you’re confident in the repairs, add a fix flag. Not all errors can be repaired automatically.

Warning

Running fsck with --fix or --fix-all may delete data points, columns or entire rows and deleted data is unrecoverable unless you restore from a backup. (or perform some HBase trickery to restore the data before a major compaction)

Note

This page documents the OpenTSDB 2.1 fsck utility. For previous versions, only the --fix flag is available and only data within a query may be fsckd.

Parameters

  1. fsck [flags] [START-DATE [END-DATE] query [queries...]]

Name

Data Type

Description

Default

Example

–fix

Flag

Optional flag that will attempt to repair errors. By itself, fix will only repair sign extension bugs, 8 byte floats with 4 byte qualifiers and VLE stand-alone data points. Use in conjunction with other flags to repair more issues.

Not set

–fix

–fix-all

Flag

Sets all repair flags to attempt to fix all issues at once. Use with caution

Not set

–fix

–compact

Flag

Compacts non-compacted rows during a repair.

Not Set

–compact

–delete-bad-compacts

Flag

Removes columns that appear to be compacted but failed parsing. If a column parses properly but the final byte of the value is not set to a 0 or a 1, the column will be left alone.

Not Set

–delete-bad-compacts

–delete-bad-rows

Flag

Removes any row that doesn’t match the OpenTSDB row key format of a metric UID followed by a timestamp and tag UIDs.

Not Set

–delete-bad-rows

–delete-bad-values

Flag

Removes any stand-alone data points that could not be repaired or did not conform to the OpenTSDB specification.

Not Set

–delete-bad-values

–delete-orphans

Flag

Removes rows where one or more UIDs could not be resolved to a name.

Not Set

–delete-orphans

–delete-unknown_columns

Flag

Removes any column that does not appear to be a compacted column, a stand-alone data point or a known or future OpenTSDB object.

Not Set

–delete-unknown-columns

–resolve-duplicates

Flag

Enables duplicate data point resolution by deleting all but the latest or oldest data point. Also see —last-write-wins.

Not Set

–resolve-duplicates

–last-write-wins

Flag

When set, deletes all but the most recently written data point when resolving duplicates. If the config value tsd.storage.fix_duplicates is set to true, then the latest data point will be kept regardless of this value.

Not Set

–last-write-wins

–full-scan

Flag

Scans the entire data table. Note: This can take a very long time to complete.

Not Set

–full-scan

–threads

Integer

The number of threads to use when performing a full scan. The default is twice the number of CPU cores.

2 x CPU Cores

–threads=16

START-DATE

String or Integer

Starting time for the query. This may be an absolute or relative time. See Dates and Times for details

1h-ago

END-DATE

String or Integer

Optional end time for the query. If not provided, the current time is used. This may be an absolute or relative time. See Dates and Times for details

Current timestamp

2014/01/01-00:00:00

query

String

One or more command line queries

sum tsd.hbase.rpcs type=put

Examples

Query

  1. fsck --fix 1h-ago now sum tsd.hbase.rpcs type=put sum tsd.hbase.rpcs type=scan

Full Table

  1. fsck --full-scan --threads=8 --fix --resolve-duplicates --compact

Full Table Vs Queries

Using the --full-scan flag, the entire OpenTSDB tsdb data table will be scanned. By default the utility will launch 2 x CPU core threads for optimal performance. Data is stored with the metric UID as the start of each row key so the utility will determine the maximum metric UID and split up the main data table equally among threads. If your data is distributed among metrics fairly evenly, then each thread should complete in roughly the same amount of time. However some metrics usually have more data or time series than others so these threads may be running much longer than others. Future updates to OpenTSDB will be able to divy up the workload in a more efficient manner.

Alternatively you can spcify a CLI query to fsck over a smaller timespan and look at a specific metric or time series. These queries will almost always complete much faster than a full scan and will uncover similar issues. However orphaned metrics will not found as the query will only operate on known time series. Orphans where tag names or values have been deleted will still be found.

Regardless of the method used, fsck only looks at the most recent column value in HBase. If the table is configured to store multiple versions, older versions of a column are ignored.

Results

The results will be logged with settings in the logback.xml file. For long fscks, it’s recommended to run in the background and configure LogBack to have plenty of space for writing data. On completion, statistics about the run will be printed. An example looks like:

  1. 2014-07-07 13:09:15,610 INFO  [main] Fsck: Starting full table scan
  2. 2014-07-07 13:09:15,619 INFO  [main] Fsck: Max metric ID is [0]
  3. 2014-07-07 13:09:15,619 INFO  [main] Fsck: Spooling up [1] worker threads
  4. 2014-07-07 13:09:16,358 INFO  [main] Fsck: Thread [0] Finished
  5. 2014-07-07 13:09:16,358 INFO  [main] Fsck: Key Values Processed: 301
  6. 2014-07-07 13:09:16,358 INFO  [main] Fsck: Rows Processed: 1
  7. 2014-07-07 13:09:16,359 INFO  [main] Fsck: Valid Datapoints: 300
  8. 2014-07-07 13:09:16,359 INFO  [main] Fsck: Annotations: 1
  9. 2014-07-07 13:09:16,359 INFO  [main] Fsck: Invalid Row Keys Found: 0
  10. 2014-07-07 13:09:16,360 INFO  [main] Fsck: Invalid Rows Deleted: 0
  11. 2014-07-07 13:09:16,360 INFO  [main] Fsck: Duplicate Datapoints: 0
  12. 2014-07-07 13:09:16,360 INFO  [main] Fsck: Duplicate Datapoints Resolved: 0
  13. 2014-07-07 13:09:16,361 INFO  [main] Fsck: Orphaned UID Rows: 0
  14. 2014-07-07 13:09:16,361 INFO  [main] Fsck: Orphaned UID Rows Deleted: 0
  15. 2014-07-07 13:09:16,361 INFO  [main] Fsck: Possible Future Objects: 0
  16. 2014-07-07 13:09:16,362 INFO  [main] Fsck: Unknown Objects: 0
  17. 2014-07-07 13:09:16,362 INFO  [main] Fsck: Unknown Objects Deleted: 0
  18. 2014-07-07 13:09:16,362 INFO  [main] Fsck: Unparseable Datapoint Values: 0
  19. 2014-07-07 13:09:16,362 INFO  [main] Fsck: Unparseable Datapoint Values Deleted: 0
  20. 2014-07-07 13:09:16,363 INFO  [main] Fsck: Improperly Encoded Floating Point Values: 0
  21. 2014-07-07 13:09:16,363 INFO  [main] Fsck: Improperly Encoded Floating Point Values Fixed: 0
  22. 2014-07-07 13:09:16,363 INFO  [main] Fsck: Unparseable Compacted Columns: 0
  23. 2014-07-07 13:09:16,364 INFO  [main] Fsck: Unparseable Compacted Columns Deleted: 0
  24. 2014-07-07 13:09:16,364 INFO  [main] Fsck: Datapoints Qualified for VLE : 0
  25. 2014-07-07 13:09:16,364 INFO  [main] Fsck: Datapoints Compressed with VLE: 0
  26. 2014-07-07 13:09:16,365 INFO  [main] Fsck: Bytes Saved with VLE: 0
  27. 2014-07-07 13:09:16,365 INFO  [main] Fsck: Total Errors: 0
  28. 2014-07-07 13:09:16,366 INFO  [main] Fsck: Total Correctable Errors: 0
  29. 2014-07-07 13:09:16,366 INFO  [main] Fsck: Total Errors Fixed: 0
  30. 2014-07-07 13:09:16,366 INFO  [main] Fsck: Completed fsck in [1] seconds

For the most part, these statistics should be self-explanatory. Key Values Processed indicates the number of individual columns in HBase. VLE referse to variable length encoding.

During a run, progress will be reported every 5 seconds so that you know the utility is still working. You should see lines similar to the following:

  1. 10:14:00.518 INFO  [Fsck.run] - Processed 47689680000 rows, 449891670779 valid datapoints
  2. 10:14:01.518 INFO  [Fsck.run] - Processed 47689730000 rows, 449892264237 valid datapoints
  3. 10:14:02.519 INFO  [Fsck.run] - Processed 47689780000 rows, 449892880333 valid datapoints

Any time an error is found (and possibly fixed), the log will be updated immediately. Errors will usually include the column where the error was found in the output. Byte arrays are represented in either Java style signed bytes, e.g. [0, 1, -42] or hex encoded strings, e.g. 00000000000000040000000000000005. Short-hand references include (k) for the row key, (q) for the qualifier and (v) for the value.

Types of Errors and Fixes

The following is a list of errors and/or fixes that can be found or performed with fsck.

Bad Row Keys

If a row key is found that doesn’t conform to the OpenTSDB data table specification <metric_UID><base_timestamp><tagk1_UID><tagv1_UID>[...<tagkn_UID><tagvn_UID>], the entire row is considered invalid.

  1. 2014-07-07 15:03:46,483 ERROR [Fsck #0] Fsck: Invalid row key.
  2.       Key: 000001

Fix:

If --delete-bad-rows is set, then the entire row will be removed from HBase.

Orphaned Rows

If a row key is parsed as a proper OpenTSDB row, then the UIDs for the time series ID (TSUID) of the row are resolved to their names. If any of the UIDs does not match a name in the tsdb-uid table, then the row is considered an orphan. This can happen if a UID is manually deleted from the UID table or a deletion does not complete properly.

  1. 2014-07-07 15:08:45,057 ERROR [Fsck #0] Fsck: Unable to resolve the metric from the row key.
  2.       Key: 00000150E22700000001000001
  3.       No such unique ID for 'metric': [0, 0, 1]

Fix:

If --delete-orphans is set, then the entire row will be removed from HBase.

Compact Row

While it’s not strictly an error, fsck can be used to compact rows into a single column. Compacting rows saves storage space by merging multiple columns into one. This cuts down on HBase overhead. If a TSD that is configured to compact columns crashes, some rows may be missed and remain in stand-alone data point form. As compaction can consume resources, you can use fsck to compact rows when the load on your cluster is reduced.

Specifying the --compact flag along with --fix will compact any row that has stand-alone data points within the query range. During compaction, any data points from old OpenTSDB versions that qualify for VLE will be re-encoded.

Note

If a row is repaired for any reason and has one or more compacted columns, the row will be re-compacted regardless of the --compact flag.

Bad Compacted Column Error

These errors occur when compacted column is found that cannot be parsed into individual data points. This can happen if the qualifier appears correct but the number of bytes in the value array do not match the lengths encoded in the qualifier. Compacted columns with their data points out of order are not considered bad columns. Instead, the column will be sorted properly and re-written if the --fix or --fix-all flags are present.

  1. 2014-07-07 13:29:40,251 ERROR [Fsck #0] Fsck: Corrupted value: couldn't break down into individual values (consumed 20 bytes, but was expecting to consume 24): [k '00000150E22700000001000001' q '000700270033' v '00000000000000040000000000000005000000000000000600'], cells so far: [Cell([0, 7], [0, 0, 0, 0, 0, 0, 0, 4]), Cell([0, 39], [0, 0, 0, 0, 0, 0, 0, 5]), Cell([0, 51], [0, 0, 0, 0])]

Fix:

The only fix for this error is to delete the column by specifying the --delete-bad-compacts flag.

Compacted Last Byte Error

The last byte of a compacted value is for storing meta data. It will usually be 0 if all of the data points are encoded in seconds or milliseconds. If there is a mixture of seconds and milliseconds will be set to 1. If the value is something else then it may be from a future version of OpenTSDB or the column may be invalid.

  1. 18:13:35.979 [main] ERROR net.opentsdb.tools.Fsck - The last byte of a compacted should be 0 or 1. Either this value is corrupted or it was written by a future version of OpenTSDB.
  2.       [k '00000150E22700000001000001' q '00070027' v '00000000000000040000000000000005']

Fix:

Currently this is not repaired. You can manually set the last byte to 0 or 1 to prevent the error from being thrown. The --delete-bad-compacts flag will not remove these columns.

Value Too Long Or Short

This may occur if a value is recorded on greater than 8 bytes for a single data point column. Individual data points are stored on 2 or 4 byte qualifiers. This error cannot happen for a data point within a compacted column. If it was compacted, the column would throw a bad compacted column error as it wouldn’t be parseable.

  1. 2014-07-07 14:50:44,022 ERROR [Fsck #0] Fsck: This floating point value must be encoded either on 4 or 8 bytes, but it's on 9 bytes.
  2.       [k '00000150E22700000001000001' q 'F000020B' v '000000000000000005']

Fix:

--delete-bad-values will remove the column.

Old Version Floats

Early OpenTSDB versions had a bug in the floating point value storage where the first 4 bytes of an 8 byte value were written with all bits set to 1. The value should be on the last four bytes as the qualifier encodes the length as four bytes. However if the invalid data was compacted, the data cannot be parsed properly and an error will be recorded.

  1. 18:43:35.297 [main] ERROR net.opentsdb.tools.Fsck - Floating point value with 0xFF most significant bytes, probably caused by sign extension bug present in revisions [96908436..607256fc].
  2.       [k '00000150E22700000001000001' q '002B' v 'FFFFFFFF43FA6666']

Fix:

The --fix flag will repair these errors by rewriting the value without the first four bytes. The qualifier remains unchanged.

4 Byte Floats with 8 Byte Value OK

Some versions of OpenTSDB may have encoded floating point values on 8 bytes when setting the qualifier length to 4 bytes. The first four bytes should be 0. If the value was compacted, the compacted column will be invalid as parsing is no longer possible.

  1. 2014-07-07 14:33:34,498 WARN  [Fsck #0] Fsck: Floating point value was marked as 4 bytes long but was actually 8 bytes long
  2.       [k '00000150E22700000001000001' q '000B' v '0000000040866666']

Fix:

The --fix flag will repair these errors by rewriting the value without the first four bytes. The qualifier remains unchanged.

4 Byte Floats with 8 Byte Value Bad

In this case a value was encoded on 8 bytes with the first four bytes set to a non-zero value. It could be that the value is an 8 byte double since OpenTSDB never actually encoded on 8 bytes, the value is likely corrupt. If the value was compacted, the compacted column will be invalid as parsing is no longer possible.

  1. 2014-07-07 14:37:02,717 ERROR [Fsck #0] Fsck: Floating point value was marked as 4 bytes long but was actually 8 bytes long and the first four bytes were not zeroed
  2.       [k '00000150E22700000001000001' q '002B' v 'FB02F40F43FA6666']

Fix:

The --delete-bad-values flag will remove the column. You could try parsing the value as a Double manually and see if it looks valid, otherwise it’s likely a corrupt column.

Unknown Object

OpenTSDB 2.0 supports objects such as annotations in the data table. If a column is found that doesn’t match an OpenTSDB object, a compacted column or a stand-alone data point, it is considered an unknown object and can likely be deleted.

  1. 2014-07-07 14:55:03,019 ERROR [Fsck #0] Fsck: Unknown qualifier, must be 2, 3, 5 or an even number of bytes.
  2.       [k '00000150E22700000001000001' q '00270401010101' v '0000000000000005']

Fix:

The --delete-unknown-columns flag will remove this column from the row.

Future Object

Objects are encoded on 3 or 5 byte qualifiers and the type is determined by a prefix. If a prefix is found that OpenTSDB doesn’t recognize, then it will report the object but it will not be deleted. Note that this may actually be an unknown or corrupted column as fsck only looks at the qualifier length and the first byte of the qualifier. If that is the case, you can safely delete this column manually.

  1. 2014-07-07 14:57:15,858 WARN  [Fsck #0] Fsck: Found an object possibly from a future version of OpenTSDB
  2.       [k '00000150E22700000001000001' q '042704' v '467574757265204F626A656374']

Fix:

Future objects are left alone during fsck. Querying over the data with a TSD that doesn’t support the object will throw an exception but versions that do support the object should procede normally.

Duplicate Timestamps

Due to the use of encoding length and type for datapoints in qualifiers, it’s possible to record a data point for the same timestamp with two different qualifiers. For example if you post an integer value for time 1 and then post a float value for time 1, two different columns will be created. Duplicates can also happen if a row has been compacted and the TSD writes a new stand-alone column that matches a timestamp in the compacted column. At query time, an exception will be thrown as TSD does not know which value is the correct one.

  1. 2014-07-07 15:22:43,231 ERROR [Fsck #0] Fsck: More than one column had a value for the same timestamp: (1356998400000)
  2.   row key: (00000150E22700000001000001)
  3.   write time: (1388534400000)  compacted: (false)  qualifier: [0, 7]  <--- Keep oldest
  4.   write time: (1388534400001)  compacted: (false)  qualifier: [0, 11]
  5.   write time: (1388534400002)  compacted: (false)  qualifier: [0, 3]
  6.   write time: (1388534400003)  compacted: (false)  qualifier: [0, 1]

Fix:

If --resolve-duplicates is set, then all data points except for the latest or the oldest value will be deleted. The fix applies to both stand-alone and compacted data points. If the --last-write-wins flag is set, then the latest value is saved. Without the --last-write-wins flag, then the oldest value is saved.

Note

If the tsd.storage.fix_duplicates configuration value is set to true then the latest value will be saved regardless of --last-write-wins.

Note

With compactions enabled, it is possible (though unlikely) that a data point is written while a row is being compacted. In this case, the compacted column will have a later timestamp than a data point written during the compaction. Therefore the default result of --resolve-duplicates will keep the stand-alone data point or, if last writes win, then the compacted value.

Variable-Length Encoding

Early OpenTSDB implementations always encoded integer values on 8 bytes. With 2.0, integers were written on the smallest number of bytes possible, either 1, 2, 4 or 8. During fsck, any 8 byte encoded integers detected will be re-written with VLE if the --fix or --fix-all flags are specified. This includes stand-alone and compacted values. At the end of a run, the number of bytes saved with VLE are displayed.