WIFI_IOT_SUCCESS   0

Defines a module-level return value to indicate a successful operation.

WIFI_IOT_FAILURE   (-1)

Defines a module-level return value to indicate an operation failure.

WIFI_IOT_ERR_UART_INVALID_PARAMETER   0x80001000

Defines a UART error code to indicate an invalid parameter.

WIFI_IOT_ERR_UART_INVALID_SUSPEND   0x80001001

Defines a UART error code to indicate an invalid pause operation.

WIFI_IOT_ERR_UART_INVALID_PARITY   0x80001002

Defines a UART error code to indicate an invalid parity check.

WIFI_IOT_ERR_UART_INVALID_DATA_BITS   0x80001003

Defines a UART error code to indicate an invalid data bit.

WIFI_IOT_ERR_UART_INVALID_STOP_BITS   0x80001004

Defines a UART error code to indicate an invalid stop bit.

WIFI_IOT_ERR_UART_INVALID_BAUD   0x80001005

Defines a UART error code to indicate an invalid baud rate.

WIFI_IOT_ERR_UART_INVALID_COM_PORT   0x80001006

Defines a UART error code to indicate an invalid port number.

WIFI_IOT_ERR_UART_NOT_SUPPORT_DMA   0x80001007

Defines a UART error code to indicate a non-support for DMA.

WIFI_IOT_ERR_UART_NOT_BLOCK_MODE   0x80001008

Defines a UART error code to indicate the non-block mode.

WIFI_IOT_ERR_GPIO_INVALID_PARAMETER   0x80001040

Defines a GPIO error code to indicate an invalid parameter.

WIFI_IOT_ERR_GPIO_REPEAT_INIT   0x80001041

Defines a GPIO error code to indicate repeated initialization.

WIFI_IOT_ERR_GPIO_NOT_INIT   0x80001042

Defines a GPIO error code to indicate non-initialization.

WIFI_IOT_ERR_GPIO_NOT_SUPPORT   0x80001043

Defines a GPIO error code to indicate a non-support.

WIFI_IOT_ERR_FLASH_NOT_INIT   0x800010C0

Defines a flash error code to indicate non-initialization.

WIFI_IOT_ERR_FLASH_INVALID_PARAM   0x800010C1

Defines a flash error code to indicate an invalid parameter.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_BEYOND_ADDR   0x800010C2

Defines a flash error code to indicate that the address is out of range.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_SIZE_ZERO   0x800010C3

Defines a flash error code to indicate that the parameter size is 0

WIFI_IOT_ERR_FLASH_INVALID_PARAM_ERASE_NOT_ALIGN   0x800010C4

Defines a flash error code to indicate that the erase size is not aligned.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_IOCTRL_DATA_NULL   0x800010C5

Defines a flash error code to indicate that the data of the I/O controller is empty.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_DATA_NULL   0x800010C6

Defines a flash error code to indicate empty data.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_PAD1   0x800010C7

Defines a flash error code to indicate that pad1 is incorrect.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_PAD2   0x800010C8

Defines a flash error code to indicate that pad2 is incorrect.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_PAD3   0x800010C9

Defines a flash error code to indicate that pad3 is incorrect.

WIFI_IOT_ERR_FLASH_INVALID_PARAM_PAD4   0x800010CA

Defines a flash error code to indicate that pad4 is incorrect.

WIFI_IOT_ERR_FLASH_TIME_OUT_WAIT_READY   0x800010CB

Defines a flash error code to indicate a timeout on waiting for ready.

WIFI_IOT_ERR_FLASH_QUAD_MODE_READ_REG1   0x800010CC

Defines a flash error code to indicate that an error occurs when reading register 1.

WIFI_IOT_ERR_FLASH_QUAD_MODE_READ_REG2   0x800010CD

Defines a flash error code to indicate that an error occurs when reading register 2.

WIFI_IOT_ERR_FLASH_QUAD_MODE_COMPARE_REG   0x800010CE

Defines a flash error code to indicate that an error occurs when comparing registers.

WIFI_IOT_ERR_FLASH_NO_MATCH_FLASH   0x800010CF

Defines a flash error code to indicate a flash mismatch.

WIFI_IOT_ERR_FLASH_WRITE_ENABLE   0x800010D0

Defines a flash error code to indicate a failure in enabling write.

WIFI_IOT_ERR_FLASH_NO_MATCH_ERASE_SIZE   0x800010D1

Defines a flash error code to indicate a mismatch in the size of data to erase.

WIFI_IOT_ERR_FLASH_MAX_SPI_OP   0x800010D2

Defines a flash error code to indicate the maximum value of the SPI operation.

WIFI_IOT_ERR_FLASH_NOT_SUPPORT_IOCTRL_ID   0x800010D3

Defines a flash error code to indicate an unsupported IO controller ID..

WIFI_IOT_ERR_FLASH_INVALID_CHIP_ID   0x800010D4

Defines a flash error code to indicate an invalid chip ID.

WIFI_IOT_ERR_FLASH_RE_INIT   0x800010D5

Defines a flash error code to indicate repeated initialization.

WIFI_IOT_ERR_FLASH_WRITE_NOT_SUPPORT_ERASE   0x800010D6

Defines a flash error code to indicate a non-support for data erasure.

WIFI_IOT_ERR_FLASH_WRITE_COMPARE_WRONG   0x800010D7

Defines a flash error code to indicate that an error occurs when comparing the data written.

WIFI_IOT_ERR_FLASH_WAIT_CFG_START_TIME_OUT   0x800010D8

Defines a flash error code to indicate a timeout on waiting for a configuration to start.

WIFI_IOT_ERR_FLASH_PATITION_INIT_FAIL   0x800010D9

Defines a flash error code to indicate a partition initialization failure.

WIFI_IOT_ERR_FLASH_INITILIZATION   0x800010DA

Defines a flash error code to indicate initialization.

WIFI_IOT_ERR_FLASH_ERASE_NOT_4K_ALIGN   0x800010DB

Defines a flash error code to indicate that the size of data to erase is not a multiple of 4K bytes.

WIFI_IOT_ERR_FLASH_PROTECT_NOT_SUPPORT   0x800010DC

Defines a flash error code to indicate a non-support.

WIFI_IOT_ERR_FLASH_PROTECT_NOT_INIT   0x800010DD

Defines a flash error code to indicate non-initialization.

WIFI_IOT_ERR_FLASH_PROTECT_RE_INIT   0x800010DE

Defines a flash error code to indicate repeated initialization.

WIFI_IOT_ERR_FLASH_PROTECT_NOT_FIND_CHIP   0x800010DF

Defines a flash error code to indicate that no chip is found.

WIFI_IOT_ERR_FLASH_CRYPTO_INVALID_PARAM   0x800010F0

Defines a flash error code to indicate an invalid parameter.

WIFI_IOT_ERR_FLASH_CRYPTO_BEYOND_ADDR_SIZE   0x800010F1

Defines a flash error code to indicate that the address is out of range.

WIFI_IOT_ERR_FLASH_CRYPTO_MALLOC_FAIL   0x800001F2

Defines a flash error code to indicate a failure in applying for memory.

WIFI_IOT_ERR_FLASH_CRYPTO_DATA_ENCRYPT_ERR   0x800001F3

Defines a flash error code to indicate an encryption error.

WIFI_IOT_ERR_FLASH_CRYPTO_DATA_DECRYPT_ERR   0x800001F4

Defines a flash error code to indicate a decryption error.

WIFI_IOT_ERR_FLASH_CRYPTO_KEY_EMPTY_ERR   0x800001F5

Defines a flash error code to indicate an empty key value.

WIFI_IOT_ERR_FLASH_CRYPTO_MEMCPY_FAIL   0x800001F6

Defines a flash error code to indicate a copy failure.

WIFI_IOT_ERR_FLASH_CRYPTO_NOT_SUPPORT   0x800001F7

Defines a flash error code to indicate a non-support for encryption.

WIFI_IOT_ERR_FLASH_CRYPTO_PREPARE_ERR   0x800001F8

Defines a flash error code to indicate an incorrect parameter during encryption.

WIFI_IOT_ERR_FLASH_CRYPTO_KEY_INVALID_ERR   0x800001F9

Defines a flash error code to indicate an invalid key.

WIFI_IOT_ERR_FLASH_CRYPTO_KEY_SAVE_ERR   0x800001FA

Defines a flash error code to indicate a failure in saving the key.

WIFI_IOT_ERR_FLASH_CRYPTO_KERNEL_ADDR_ERR   0x800001FB

Defines a flash error code to indicate an incorrect kernel address..

WIFI_IOT_ERR_I2C_NOT_INIT   0x80001180

Defines an I2C error code to indicate a non-support.

WIFI_IOT_ERR_I2C_INVALID_PARAMETER   0x80001181

Defines an I2C error code to indicate an invalid parameter.

WIFI_IOT_ERR_I2C_TIMEOUT_START   0x80001182

Defines an I2C error code to indicate a start timeout.

WIFI_IOT_ERR_I2C_TIMEOUT_WAIT   0x80001183

Defines an I2C error code to indicate a wait timeout.

WIFI_IOT_ERR_I2C_TIMEOUT_STOP   0x80001184

Defines an I2C error code to indicate a stop timeout.

WIFI_IOT_ERR_I2C_TIMEOUT_RCV_BYTE   0x80001185

Defines an I2C error code to indicate a receive timeout.

WIFI_IOT_ERR_I2C_TIMEOUT_RCV_BYTE_PROC   0x80001186

Defines an I2C error code to indicate a processing timeout.

WIFI_IOT_ERR_I2C_WAIT_SEM_FAIL   0x80001187

Defines an I2C error code to indicate a waiting failure.

WIFI_IOT_ERR_I2C_START_ACK_ERR   0x80001188

Defines an I2C error code to indicate a responding failure.

WIFI_IOT_ERR_I2C_WAIT_ACK_ERR   0x80001189

Defines an I2C error code to indicate a failure in waiting for a response.

WIFI_IOT_ERR_SPI_NOT_INIT   0x800011C0

Defines an SPI error code to indicate non-initialization.

WIFI_IOT_ERR_SPI_REINIT   0x800011C1

Defines an SPI error code to indicate repeated initialization.

WIFI_IOT_ERR_SPI_PARAMETER_WRONG   0x800011C2

Defines an SPI error code to indicate a parameter error.

WIFI_IOT_ERR_SPI_BUSY   0x800011C3

Defines an SPI error code to indicate the busy state.

WIFI_IOT_ERR_SPI_WRITE_TIMEOUT   0x800011C4

Defines an SPI error code to indicate a write timeout.

WIFI_IOT_ERR_SPI_READ_TIMEOUT   0x800011C5

Defines an SPI error code to indicate a read timeout.

WIFI_IOT_ERR_SPI_NOT_SUPPORT_DMA   0x800011C6

Defines an SPI error code to indicate a non-support for DMA.

WIFI_IOT_ERR_SDIO_INVALID_PARAMETER   0x80001280

Defines an SDIO error code to indicate an invalid parameter.

WIFI_IOT_ERR_ADC_PARAMETER_WRONG   0x80001300

Defines an ADC error code to indicate a parameter error.

WIFI_IOT_ERR_ADC_INVALID_CHANNEL_ID   0x80001301

Defines an ADC error code to indicate an invalid channel.

WIFI_IOT_ERR_ADC_TIMEOUT   0x80001302

Defines an ADC error code to indicate a timeout.

WIFI_IOT_ERR_ADC_NOT_INIT   0x80001303

Defines an ADC error code to indicate non-initialization.

WIFI_IOT_ERR_PWM_NO_INIT   0x80001340

Defines a PWM error code to indicate non-initialization.

WIFI_IOT_ERR_PWM_INITILIZATION_ALREADY   0x80001341

Defines a PWM error code to indicate an initialization error.

WIFI_IOT_ERR_PWM_INVALID_PARAMETER   0x80001342

Defines a PWM error code to indicate an invalid parameter.

WIFI_IOT_ERR_DMA_INVALID_PARA   0x80001380

Defines a DMA error code to indicate an invalid parameter.

WIFI_IOT_ERR_DMA_NOT_INIT   0x80001381

Defines a DMA error code to indicate non-initialization.

WIFI_IOT_ERR_DMA_BUSY   0x80001382

Defines a DMA error code to indicate the busy state.

WIFI_IOT_ERR_DMA_TRANSFER_FAIL   0x80001383

Defines a DMA error code to indicate a transmission failure.

WIFI_IOT_ERR_DMA_TRANSFER_TIMEOUT   0x80001384

Defines a DMA error code to indicate a transmission timeout.

WIFI_IOT_ERR_DMA_GET_NOTE_FAIL   0x80001385

Defines a DMA error code to indicate a retrieval failure.

WIFI_IOT_ERR_DMA_LLI_NOT_CREATE   0x80001386

Defines a DMA error code to indicate that the LLI is not created.

WIFI_IOT_ERR_DMA_CH_IRQ_ENABLE_FAIL   0x80001387

Defines a DMA error code to indicate a failure in enabling channel interrupt.

WIFI_IOT_ERR_I2S_INVALID_PARAMETER   0x80001400

Defines an I2S error code to indicate an invalid parameter.

WIFI_IOT_ERR_I2S_WRITE_TIMEOUT   0x80001401

Defines an I2S error code to indicate a write timeout.

WIFI_IOT_ERR_AT_NAME_OR_FUNC_REPEAT_REGISTERED   0x80003280

Defines an AT error code to indicate repeated function registration.

WIFI_IOT_ERR_AT_INVALID_PARAMETER   0x80003281

Defines an AT error code to indicate an invalid parameter.