What huge pages do and how they are consumed by applications

What huge pages do

Memory is managed in blocks known as pages. On most systems, a page is 4Ki. 1Mi of memory is equal to 256 pages; 1Gi of memory is 256,000 pages, and so on. CPUs have a built-in memory management unit that manages a list of these pages in hardware. The Translation Lookaside Buffer (TLB) is a small hardware cache of virtual-to-physical page mappings. If the virtual address passed in a hardware instruction can be found in the TLB, the mapping can be determined quickly. If not, a TLB miss occurs, and the system falls back to slower, software-based address translation, resulting in performance issues. Since the size of the TLB is fixed, the only way to reduce the chance of a TLB miss is to increase the page size.

A huge page is a memory page that is larger than 4Ki. On x86_64 architectures, there are two common huge page sizes: 2Mi and 1Gi. Sizes vary on other architectures. To use huge pages, code must be written so that applications are aware of them. Transparent Huge Pages (THP) attempt to automate the management of huge pages without application knowledge, but they have limitations. In particular, they are limited to 2Mi page sizes. THP can lead to performance degradation on nodes with high memory utilization or fragmentation due to defragmenting efforts of THP, which can lock memory pages. For this reason, some applications may be designed to (or recommend) usage of pre-allocated huge pages instead of THP.

In OKD, applications in a pod can allocate and consume pre-allocated huge pages.

How huge pages are consumed by apps

Nodes must pre-allocate huge pages in order for the node to report its huge page capacity. A node can only pre-allocate huge pages for a single size.

Huge pages can be consumed through container-level resource requirements using the resource name hugepages-<size>, where size is the most compact binary notation using integer values supported on a particular node. For example, if a node supports 2048KiB page sizes, it exposes a schedulable resource hugepages-2Mi. Unlike CPU or memory, huge pages do not support over-commitment.

apiVersion: v1
kind: Pod
metadata:
  generateName: hugepages-volume-
spec:
  containers:
  - securityContext:
      privileged: true
    image: rhel7:latest
    command:
    - sleep
    - inf
    name: example
    volumeMounts:
    - mountPath: /dev/hugepages
      name: hugepage
    resources:
      limits:
        hugepages-2Mi: 100Mi (1)
        memory: "1Gi"
        cpu: "1"
  volumes:
  - name: hugepage
    emptyDir:
      medium: HugePages

Allocating huge pages of a specific size

Some platforms support multiple huge page sizes. To allocate huge pages of a specific size, precede the huge pages boot command parameters with a huge page size selection parameter hugepagesz=<size>. The <size> value must be specified in bytes with an optional scale suffix [kKmMgG]. The default huge page size can be defined with the default_hugepagesz=<size> boot parameter.

Huge page requirements

• Huge page requests must equal the limits. This is the default if limits are specified, but requests are not.

• Huge pages are isolated at a pod scope. Container isolation is planned in a future iteration.

• EmptyDir volumes backed by huge pages must not consume more huge page memory than the pod request.

• Applications that consume huge pages via shmget() with SHM_HUGETLB must run with a supplemental group that matches proc/sys/vm/hugetlb_shm_group.

Additional resources

• Configuring Transparent Huge Pages

Configuring huge pages

Nodes must pre-allocate huge pages used in an OKD cluster. There are two ways of reserving huge pages: at boot time and at run time. Reserving at boot time increases the possibility of success because the memory has not yet been significantly fragmented. The Node Tuning Operator currently supports boot time allocation of huge pages on specific nodes.

At boot time

Procedure

To minimize node reboots, the order of the steps below needs to be followed:

1. Label all nodes that need the same huge pages setting by a label.

   $ oc label node <node_using_hugepages> node-role.kubernetes.io/worker-hp=

2. Create a file with the following content and name it hugepages-tuned-boottime.yaml:

   apiVersion: tuned.openshift.io/v1
   kind: Tuned
   metadata:
     name: hugepages (1)
     namespace: openshift-cluster-node-tuning-operator
   spec:
     profile: (2)
     - data: |
         [main]
         summary=Boot time configuration for hugepages
         include=openshift-node
         [bootloader]
         cmdline_openshift_node_hugepages=hugepagesz=2M hugepages=50 (3)
       name: openshift-node-hugepages
     recommend:
     - machineConfigLabels: (4)
         machineconfiguration.openshift.io/role: "worker-hp"
       priority: 30
       profile: openshift-node-hugepages

   1	Set the name of the Tuned resource to hugepages.
   2	Set the profile section to allocate huge pages.
   3	Note the order of parameters is important as some platforms support huge pages of various sizes.
   4	Enable machine config pool based matching.

3. Create the Tuned hugepages profile

   $ oc create -f hugepages-tuned-boottime.yaml

4. Create a file with the following content and name it hugepages-mcp.yaml:

   apiVersion: machineconfiguration.openshift.io/v1
   kind: MachineConfigPool
   metadata:
     name: worker-hp
     labels:
       worker-hp: ""
   spec:
     machineConfigSelector:
       matchExpressions:
         - {key: machineconfiguration.openshift.io/role, operator: In, values: [worker,worker-hp]}
     nodeSelector:
       matchLabels:
         node-role.kubernetes.io/worker-hp: ""

5. Create the machine config pool:

   $ oc create -f hugepages-mcp.yaml

Given enough non-fragmented memory, all the nodes in the worker-hp machine config pool should now have 50 2Mi huge pages allocated.

$ oc get node <node_using_hugepages> -o jsonpath="{.status.allocatable.hugepages-2Mi}"
100Mi