Installation configuration parameters for GCP
- Available installation configuration parameters for GCP

Installation configuration parameters for GCP

Before you deploy an OKD cluster on Google Cloud Platform (GCP), you provide parameters to customize your cluster and the platform that hosts it. When you create the install-config.yaml file, you provide values for the required parameters through the command line. You can then modify the install-config.yaml file to customize your cluster further.

Available installation configuration parameters for GCP

The following tables specify the required, optional, and GCP-specific installation configuration parameters that you can set as part of the installation process.

After installation, you cannot modify these parameters in the install-config.yaml file.

Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 1. Required parameters
Parameter	Description	Values
`apiVersion`	The API version for the `install-config.yaml` content. The current version is `v1`. The installation program may also support older API versions.	String
`baseDomain`	The base domain of your cloud provider. The base domain is used to create routes to your OKD cluster components. The full DNS name for your cluster is a combination of the `baseDomain` and `metadata.name` parameter values that uses the `<metadata.name>.<baseDomain>` format.	A fully-qualified domain or subdomain name, such as `example.com`.
`metadata`	Kubernetes resource `ObjectMeta`, from which only the `name` parameter is consumed.	Object
`metadata.name`	The name of the cluster. DNS records for the cluster are all subdomains of `{{.metadata.name}}.{{.baseDomain}}`.	String of lowercase letters, hyphens (`-`), and periods (`.`), such as `dev`.
`platform`	The configuration for the specific platform upon which to perform the installation: `alibabacloud`, `aws`, `baremetal`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `powervs`, `vsphere`, or `{}`. For additional information about `platform.<platform>` parameters, consult the table for your specific platform that follows.	Object

Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Only IPv4 addresses are supported.

Globalnet is not supported with Red Hat OpenShift Data Foundation disaster recovery solutions. For regional disaster recovery scenarios, ensure that you use a nonoverlapping range of private IP addresses for the cluster and service networks in each cluster.

Parameter Description Values

networking

The configuration for the cluster network.

Object

You cannot modify parameters specified by the networking object after installation.

networking.networkType

The Red Hat OpenShift Networking network plugin to install.

Either OpenShiftSDN or OVNKubernetes. The default value is OVNKubernetes.

networking.clusterNetwork

The IP address blocks for pods.

The default value is 10.128.0.0/14 with a host prefix of /23.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23

networking.clusterNetwork.cidr

Required if you use networking.clusterNetwork. An IP address block.

An IPv4 network.

An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between 0 and 32.

networking.clusterNetwork.hostPrefix

The subnet prefix length to assign to each individual node. For example, if hostPrefix is set to 23 then each node is assigned a /23 subnet out of the given cidr. A hostPrefix value of 23 provides 510 (2^(32 - 23) - 2) pod IP addresses.

A subnet prefix.

The default value is 23.

networking.serviceNetwork

The IP address block for services. The default value is 172.30.0.0/16.

The OpenShift SDN and OVN-Kubernetes network plugins support only a single IP address block for the service network.

An array with an IP address block in CIDR format. For example:

networking:
  serviceNetwork:
   - 172.30.0.0/16

networking.machineNetwork

The IP address blocks for machines.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  machineNetwork:
  - cidr: 10.0.0.0/16

networking.machineNetwork.cidr

Required if you use networking.machineNetwork. An IP address block. The default value is 10.0.0.0/16 for all platforms other than libvirt and IBM Power Virtual Server. For libvirt, the default value is 192.168.126.0/24. For IBM Power Virtual Server, the default value is 192.168.0.0/24.

An IP network block in CIDR notation.

For example, 10.0.0.0/16.

Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.

Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Parameter Description Values

additionalTrustBundle

A PEM-encoded X.509 certificate bundle that is added to the nodes’ trusted certificate store. This trust bundle may also be used when a proxy has been configured.

String

capabilities

Controls the installation of optional core cluster components. You can reduce the footprint of your OKD cluster by disabling optional components. For more information, see the “Cluster capabilities” page in Installing.

String array

capabilities.baselineCapabilitySet

Selects an initial set of optional capabilities to enable. Valid values are None, v4.11, v4.12 and vCurrent. The default value is vCurrent.

String

capabilities.additionalEnabledCapabilities

Extends the set of optional capabilities beyond what you specify in baselineCapabilitySet. You may specify multiple capabilities in this parameter.

String array

cpuPartitioningMode

Enables workload partitioning, which isolates OKD services, cluster management workloads, and infrastructure pods to run on a reserved set of CPUs. Workload partitioning can only be enabled during installation and cannot be disabled after installation. While this field enables workload partitioning, it does not configure workloads to use specific CPUs. For more information, see the Workload partitioning page in the Scalability and Performance section.

None or AllNodes. None is the default value.

compute

The configuration for the machines that comprise the compute nodes.

Array of MachinePool objects.

compute.architecture

Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are amd64 (the default).

String

compute.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines’ cores.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

compute.name

Required if you use compute. The name of the machine pool.

worker

compute.platform

Required if you use compute. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the controlPlane.platform parameter value.

alibabacloud, aws, azure, gcp, ibmcloud, nutanix, openstack, powervs, vsphere, or {}

compute.replicas

The number of compute machines, which are also known as worker machines, to provision.

A positive integer greater than or equal to 2. The default value is 3.

featureSet

Enables the cluster for a feature set. A feature set is a collection of OKD features that are not enabled by default. For more information about enabling a feature set during installation, see “Enabling features using feature gates”.

String. The name of the feature set to enable, such as TechPreviewNoUpgrade.

controlPlane

The configuration for the machines that comprise the control plane.

Array of MachinePool objects.

controlPlane.architecture

String

controlPlane.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines’ cores.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

controlPlane.name

Required if you use controlPlane. The name of the machine pool.

master

controlPlane.platform

Required if you use controlPlane. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the compute.platform parameter value.

alibabacloud, aws, azure, gcp, ibmcloud, nutanix, openstack, powervs, vsphere, or {}

controlPlane.replicas

The number of control plane machines to provision.

The only supported value is 3, which is the default value.

credentialsMode

The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported.

Mint, Passthrough, Manual or an empty string (“”). ^[1]

imageContentSources

Sources and repositories for the release-image content.

Array of objects. Includes a source and, optionally, mirrors, as described in the following rows of this table.

imageContentSources.source

Required if you use imageContentSources. Specify the repository that users refer to, for example, in image pull specifications.

String

imageContentSources.mirrors

Specify one or more repositories that may also contain the same images.

Array of strings

publish

How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.

Internal or External. To deploy a private cluster, which cannot be accessed from the internet, set publish to Internal. The default value is External.

sshKey

The SSH key to authenticate access to your cluster machines.

For production OKD clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

For example, sshKey: ssh-ed25519 AAAA...

Not all CCO modes are supported for all cloud providers. For more information about CCO modes, see the “Managing cloud provider credentials” entry in the Authentication and authorization content.

If you are installing on GCP into a shared virtual private cloud (VPC), credentialsMode must be set to Passthrough or Manual.

Setting this parameter to Manual enables alternatives to storing administrator-level secrets in the kube-system project, which require additional configuration steps. For more information, see “Alternatives to storing administrator-level secrets in the kube-system project”.

Additional Google Cloud Platform (GCP) configuration parameters

Additional GCP configuration parameters are described in the following table:

Parameter Description Values

controlPlane.platform.gcp.osImage.project

Optional. By default, the installation program downloads and installs the Fedora CoreOS (FCOS) image that is used to boot control plane machines. You can override the default behavior by specifying the location of a custom FCOS image that the installation program is to use for control plane machines only.

String. The name of GCP project where the image is located.

controlPlane.platform.gcp.osImage.name

The name of the custom FCOS image that the installation program is to use to boot control plane machines. If you use controlPlane.platform.gcp.osImage.project, this field is required.

String. The name of the FCOS image.

compute.platform.gcp.osImage.project

Optional. By default, the installation program downloads and installs the FCOS image that is used to boot compute machines. You can override the default behavior by specifying the location of a custom FCOS image that the installation program is to use for compute machines only.

String. The name of GCP project where the image is located.

compute.platform.gcp.osImage.name

The name of the custom FCOS image that the installation program is to use to boot compute machines. If you use compute.platform.gcp.osImage.project, this field is required.

String. The name of the FCOS image.

platform.gcp.network

The name of the existing Virtual Private Cloud (VPC) where you want to deploy your cluster. If you want to deploy your cluster into a shared VPC, you must set platform.gcp.networkProjectID with the name of the GCP project that contains the shared VPC.

String.

platform.gcp.networkProjectID

Optional. The name of the GCP project that contains the shared VPC where you want to deploy your cluster.

String.

platform.gcp.projectID

The name of the GCP project where the installation program installs the cluster.

String.

platform.gcp.region

The name of the GCP region that hosts your cluster.

Any valid region name, such as us-central1.

platform.gcp.controlPlaneSubnet

The name of the existing subnet where you want to deploy your control plane machines.

The subnet name.

platform.gcp.computeSubnet

The name of the existing subnet where you want to deploy your compute machines.

The subnet name.

platform.gcp.defaultMachinePlatform.zones

The availability zones where the installation program creates machines.

A list of valid GCP availability zones, such as us-central1-a, in a YAML sequence.

When running your cluster on GCP 64-bit ARM infrastructures, ensure that you use a zone where Ampere Altra Arm CPU’s are available. You can find which zones are compatible with 64-bit ARM processors in the “GCP availability zones” link.

platform.gcp.defaultMachinePlatform.osDisk.diskSizeGB

The size of the disk in gigabytes (GB).

Any size between 16 GB and 65536 GB.

platform.gcp.defaultMachinePlatform.osDisk.diskType

The GCP disk type.

The default disk type for all machines. Control plane nodes must use the pd-ssd disk type. Compute nodes can use the pd-ssd, pd-balanced, or pd-standard disk types.

platform.gcp.defaultMachinePlatform.osImage.project

Optional. By default, the installation program downloads and installs the FCOS image that is used to boot control plane and compute machines. You can override the default behavior by specifying the location of a custom FCOS image that the installation program is to use for both types of machines.

String. The name of GCP project where the image is located.

platform.gcp.defaultMachinePlatform.osImage.name

The name of the custom FCOS image that the installation program is to use to boot control plane and compute machines. If you use platform.gcp.defaultMachinePlatform.osImage.project, this field is required.

String. The name of the RHCOS image.

platform.gcp.defaultMachinePlatform.tags

Optional. Additional network tags to add to the control plane and compute machines.

One or more strings, for example network-tag1.

platform.gcp.defaultMachinePlatform.type

The GCP machine type for control plane and compute machines.

The GCP machine type, for example n1-standard-4.

platform.gcp.defaultMachinePlatform.osDisk.encryptionKey.kmsKey.name

The name of the customer managed encryption key to be used for machine disk encryption.

The encryption key name.

platform.gcp.defaultMachinePlatform.osDisk.encryptionKey.kmsKey.keyRing

The name of the Key Management Service (KMS) key ring to which the KMS key belongs.

The KMS key ring name.

platform.gcp.defaultMachinePlatform.osDisk.encryptionKey.kmsKey.location

The GCP location in which the KMS key ring exists.

The GCP location.

platform.gcp.defaultMachinePlatform.osDisk.encryptionKey.kmsKey.projectID

The ID of the project in which the KMS key ring exists. This value defaults to the value of the platform.gcp.projectID parameter if it is not set.

The GCP project ID.

platform.gcp.defaultMachinePlatform.osDisk.encryptionKey.kmsKeyServiceAccount

The GCP service account used for the encryption request for control plane and compute machines. If absent, the Compute Engine default service account is used. For more information about GCP service accounts, see Google’s documentation on service accounts.

The GCP service account email, for example <service_account_name>@<project_id>.iam.gserviceaccount.com.

platform.gcp.defaultMachinePlatform.secureBoot

Whether to enable Shielded VM secure boot for all machines in the cluster. Shielded VMs have additional security protocols such as secure boot, firmware and integrity monitoring, and rootkit protection. For more information on Shielded VMs, see Google’s documentation on Shielded VMs.

Enabled or Disabled. The default value is Disabled.

platform.gcp.defaultMachinePlatform.confidentialCompute

Whether to use Confidential VMs for all machines in the cluster. Confidential VMs provide encryption for data during processing. For more information on Confidential computing, see Google’s documentation on Confidential computing.

Enabled or Disabled. The default value is Disabled.

platform.gcp.defaultMachinePlatform.onHostMaintenance

Specifies the behavior of all VMs during a host maintenance event, such as a software or hardware update. For Confidential VMs, this parameter must be set to Terminate. Confidential VMs do not support live VM migration.

Terminate or Migrate. The default value is Migrate.

controlPlane.platform.gcp.osDisk.encryptionKey.kmsKey.name

The name of the customer managed encryption key to be used for control plane machine disk encryption.

The encryption key name.

controlPlane.platform.gcp.osDisk.encryptionKey.kmsKey.keyRing

For control plane machines, the name of the KMS key ring to which the KMS key belongs.

The KMS key ring name.

controlPlane.platform.gcp.osDisk.encryptionKey.kmsKey.location

For control plane machines, the GCP location in which the key ring exists. For more information about KMS locations, see Google’s documentation on Cloud KMS locations.

The GCP location for the key ring.

controlPlane.platform.gcp.osDisk.encryptionKey.kmsKey.projectID

For control plane machines, the ID of the project in which the KMS key ring exists. This value defaults to the VM project ID if not set.

The GCP project ID.

controlPlane.platform.gcp.osDisk.encryptionKey.kmsKeyServiceAccount

The GCP service account used for the encryption request for control plane machines. If absent, the Compute Engine default service account is used. For more information about GCP service accounts, see Google’s documentation on service accounts.

The GCP service account email, for example <service_account_name>@<project_id>.iam.gserviceaccount.com.

controlPlane.platform.gcp.osDisk.diskSizeGB

The size of the disk in gigabytes (GB). This value applies to control plane machines.

Any integer between 16 and 65536.

controlPlane.platform.gcp.osDisk.diskType

The GCP disk type for control plane machines.

Control plane machines must use the pd-ssd disk type, which is the default.

controlPlane.platform.gcp.tags

Optional. Additional network tags to add to the control plane machines. If set, this parameter overrides the platform.gcp.defaultMachinePlatform.tags parameter for control plane machines.

One or more strings, for example control-plane-tag1.

controlPlane.platform.gcp.type

The GCP machine type for control plane machines. If set, this parameter overrides the platform.gcp.defaultMachinePlatform.type parameter.

The GCP machine type, for example n1-standard-4.

controlPlane.platform.gcp.zones

The availability zones where the installation program creates control plane machines.

A list of valid GCP availability zones, such as us-central1-a, in a YAML sequence.

controlPlane.platform.gcp.secureBoot

Whether to enable Shielded VM secure boot for control plane machines. Shielded VMs have additional security protocols such as secure boot, firmware and integrity monitoring, and rootkit protection. For more information on Shielded VMs, see Google’s documentation on Shielded VMs.

Enabled or Disabled. The default value is Disabled.

controlPlane.platform.gcp.confidentialCompute

Whether to enable Confidential VMs for control plane machines. Confidential VMs provide encryption for data while it is being processed. For more information on Confidential VMs, see Google’s documentation on Confidential Computing.

Enabled or Disabled. The default value is Disabled.

controlPlane.platform.gcp.onHostMaintenance

Specifies the behavior of control plane VMs during a host maintenance event, such as a software or hardware update. For Confidential VMs, this parameter must be set to Terminate. Confidential VMs do not support live VM migration.

Terminate or Migrate. The default value is Migrate.

compute.platform.gcp.osDisk.encryptionKey.kmsKey.name

The name of the customer managed encryption key to be used for compute machine disk encryption.

The encryption key name.

compute.platform.gcp.osDisk.encryptionKey.kmsKey.keyRing

For compute machines, the name of the KMS key ring to which the KMS key belongs.

The KMS key ring name.

compute.platform.gcp.osDisk.encryptionKey.kmsKey.location

For compute machines, the GCP location in which the key ring exists. For more information about KMS locations, see Google’s documentation on Cloud KMS locations.

The GCP location for the key ring.

compute.platform.gcp.osDisk.encryptionKey.kmsKey.projectID

For compute machines, the ID of the project in which the KMS key ring exists. This value defaults to the VM project ID if not set.

The GCP project ID.

compute.platform.gcp.osDisk.encryptionKey.kmsKeyServiceAccount

The GCP service account used for the encryption request for compute machines. If this value is not set, the Compute Engine default service account is used. For more information about GCP service accounts, see Google’s documentation on service accounts.

The GCP service account email, for example <service_account_name>@<project_id>.iam.gserviceaccount.com.

compute.platform.gcp.osDisk.diskSizeGB

The size of the disk in gigabytes (GB). This value applies to compute machines.

Any integer between 16 and 65536.

compute.platform.gcp.osDisk.diskType

The GCP disk type for compute machines.

pd-ssd, pd-standard, or pd-balanced. The default is pd-ssd.

compute.platform.gcp.tags

Optional. Additional network tags to add to the compute machines. If set, this parameter overrides the platform.gcp.defaultMachinePlatform.tags parameter for compute machines.

One or more strings, for example compute-network-tag1.

compute.platform.gcp.type

The GCP machine type for compute machines. If set, this parameter overrides the platform.gcp.defaultMachinePlatform.type parameter.

The GCP machine type, for example n1-standard-4.

compute.platform.gcp.zones

The availability zones where the installation program creates compute machines.

A list of valid GCP availability zones, such as us-central1-a, in a YAML sequence.

compute.platform.gcp.secureBoot

Whether to enable Shielded VM secure boot for compute machines. Shielded VMs have additional security protocols such as secure boot, firmware and integrity monitoring, and rootkit protection. For more information on Shielded VMs, see Google’s documentation on Shielded VMs.

Enabled or Disabled. The default value is Disabled.

compute.platform.gcp.confidentialCompute

Whether to enable Confidential VMs for compute machines. Confidential VMs provide encryption for data while it is being processed. For more information on Confidential VMs, see Google’s documentation on Confidential Computing.

Enabled or Disabled. The default value is Disabled.

compute.platform.gcp.onHostMaintenance

Specifies the behavior of compute VMs during a host maintenance event, such as a software or hardware update. For Confidential VMs, this parameter must be set to Terminate. Confidential VMs do not support live VM migration.

Terminate or Migrate. The default value is Migrate.