Backing up applications

You back up applications by creating a Backup custom resource (CR).

The Backup CR creates backup files for Kubernetes resources and internal images, on S3 object storage, and snapshots for persistent volumes (PVs), if the cloud provider uses a native snapshot API or the Container Storage Interface (CSI) to create snapshots, such as OpenShift Data Foundation 4. For more information, see CSI volume snapshots.

If your cloud provider has a native snapshot API or supports Container Storage Interface (CSI) snapshots, the Backup CR backs up persistent volumes by creating snapshots. For more information, see the Overview of CSI volume snapshots in the OKD documentation.

If your cloud provider does not support snapshots or if your applications are on NFS data volumes, you can create backups by using Restic.

You can create backup hooks to run commands before or after the backup operation.

You can schedule backups by creating a Schedule CR instead of a Backup CR.

Creating a Backup CR

You back up Kubernetes images, internal images, and persistent volumes (PVs) by creating a Backup custom resource (CR).

Prerequisites

• You must install the OpenShift API for Data Protection (OADP) Operator.

• The DataProtectionApplication CR must be in a Ready state.

• Backup location prerequisites:

  • You must have S3 object storage configured for Velero.

  • You must have a backup location configured in the DataProtectionApplication CR.

• Snapshot location prerequisites:

  • Your cloud provider must have a native snapshot API or support Container Storage Interface (CSI) snapshots.

  • For CSI snapshots, you must create a VolumeSnapshotClass CR to register the CSI driver.

  • You must have a volume location configured in the DataProtectionApplication CR.

Procedure

1. Retrieve the backupStorageLocations CRs by entering the following command:

   $ oc get backupStorageLocations

   Example output

   NAME              PHASE       LAST VALIDATED   AGE   DEFAULT
   velero-sample-1   Available   11s              31m

2. Create a Backup CR, as in the following example:

   apiVersion: velero.io/v1
   kind: Backup
   metadata:
     name: <backup>
     labels:
       velero.io/storage-location: default
     namespace: openshift-adp
   spec:
     hooks: {}
     includedNamespaces:
     - <namespace> (1)
     includedResources: [] (2)
     excludedResources: [] (3)
     storageLocation: <velero-sample-1> (4)
     ttl: 720h0m0s
     labelSelector: (3)
     - matchLabels:
         app=<label_1>
     - matchLabels:
         app=<label_2>
     - matchLabels:
         app=<label_3>
     orlabelSelectors: (4)
     - matchLabels:
         app=<label_1>
     - matchLabels:
         app=<label_2>
     - matchLabels:
         app=<label_3>

   1	Specify an array of namespaces to back up.
   2	Optional: Specify an array of resources to include in the backup. Resources might be shortcuts (for example, ‘po’ for ‘pods’) or fully-qualified. If unspecified, all resources are included.
   3	Optional: Specify an array of resources to exclude from the backup. Resources might be shortcuts (for example, ‘po’ for ‘pods’) or fully-qualified.
   4	Specify the name of the backupStorageLocations CR.

3. Verify that the status of the Backup CR is Completed:

   $ oc get backup -n openshift-adp <backup> -o jsonpath='{.status.phase}'

Backing up persistent volumes with CSI snapshots

You back up persistent volumes with Container Storage Interface (CSI) snapshots by editing the VolumeSnapshotClass custom resource (CR) of the cloud storage before you create the Backup CR.

Prerequisites

• The cloud provider must support CSI snapshots.

• You must enable CSI in the DataProtectionApplication CR.

Procedure

• Add the metadata.labels.velero.io/csi-volumesnapshot-class: "true" key-value pair to the VolumeSnapshotClass CR:

  apiVersion: snapshot.storage.k8s.io/v1
  kind: VolumeSnapshotClass
  metadata:
    name: <volume_snapshot_class_name>
    labels:
      velero.io/csi-volumesnapshot-class: "true"
  driver: <csi_driver>
  deletionPolicy: Retain

You can now create a Backup CR.

Backing up applications with Restic

You back up Kubernetes resources, internal images, and persistent volumes with Restic by editing the Backup custom resource (CR).

You do not need to specify a snapshot location in the DataProtectionApplication CR.

Prerequisites

• You must install the OpenShift API for Data Protection (OADP) Operator.

• You must not disable the default Restic installation by setting spec.configuration.restic.enable to false in the DataProtectionApplication CR.

• The DataProtectionApplication CR must be in a Ready state.

Procedure

• Edit the Backup CR, as in the following example:

  apiVersion: velero.io/v1
  kind: Backup
  metadata:
    name: <backup>
    labels:
      velero.io/storage-location: default
    namespace: openshift-adp
  spec:
    defaultVolumesToRestic: true (1)
  ...

  1	Add defaultVolumesToRestic: true to the spec block.

Using Data Mover for CSI snapshots

The OADP 1.1.0 Data Mover enables customers to back up container storage interface (CSI) volume snapshots to a remote object store. When Data Mover is enabled, you can restore stateful applications from the store if a failure, accidental deletion, or corruption of the cluster occurs. The OADP 1.1.0 Data Mover solution uses the Restic option of VolSync.

Prerequisites

• You have verified that the StorageClass and VolumeSnapshotClass custom resources (CRs) support CSI.

• You have verified that only one volumeSnapshotClass CR has the annotation snapshot.storage.kubernetes.io/is-default-class: true.

• You have verified that only one storageClass CR has the annotation storageclass.kubernetes.io/is-default-class: true.

• You have included the label velero.io/csi-volumesnapshot-class: 'true' in your VolumeSnapshotClass CR.

• You have installed the VolSync Operator by using the Operator Lifecycle Manager (OLM).

  The VolSync Operator is required only for use with the Technology Preview Data Mover. The Operator is not required for using OADP production features.

• You have installed the OADP operator by using OLM.

Procedure

1. Configure a Restic secret by creating a .yaml file as following:

   apiVersion: v1
   kind: Secret
   metadata:
     name: <secret_name>
     namespace: openshift-adp
   type: Opaque
   stringData:
     RESTIC_PASSWORD: <secure_restic_password>

   By default, the Operator looks for a secret named dm-credential. If you are using a different name, you need to specify the name through a Data Protection Application (DPA) CR using dpa.spec.features.dataMover.credentialName.

2. Create a DPA CR similar to the following example. The default plugins include CSI.

   Example Data Protection Application (DPA) CR

   apiVersion: oadp.openshift.io/v1alpha1
   kind: DataProtectionApplication
   metadata:
     name: velero-sample
     namespace: openshift-adp
   spec:
     features:
       dataMover:
         enable: true
         credentialName: <secret_name> (1)
     backupLocations:
       - velero:
           config:
             profile: default
             region: us-east-1
           credential:
             key: cloud
             name: cloud-credentials
           default: true
           objectStorage:
             bucket: <bucket_name>
             prefix: <bucket_prefix>
           provider: aws
     configuration:
       restic:
         enable: <true_or_false>
       velero:
         defaultPlugins:
           - openshift
           - aws
           - csi

   1	Add the Restic secret name from the previous step. If this is not done, the default secret name dm-credential is used.

   The OADP Operator installs two custom resource definitions (CRDs), VolumeSnapshotBackup and VolumeSnapshotRestore.

   Example VolumeSnapshotBackup CRD

   apiVersion: datamover.oadp.openshift.io/v1alpha1
   kind: VolumeSnapshotBackup
   metadata:
     name: <vsb_name>
     namespace: <namespace_name> (1)
   spec:
     volumeSnapshotContent:
       name: <snapcontent_name>
     protectedNamespace: <adp_namespace>
     resticSecretRef:
       name: <restic_secret_name>

   1	Specify the namespace where the volume snapshot exists.

   Example VolumeSnapshotRestore CRD

   apiVersion: datamover.oadp.openshift.io/v1alpha1
   kind: VolumeSnapshotRestore
   metadata:
     name: <vsr_name>
     namespace: <namespace_name> (1)
   spec:
     protectedNamespace: <protected_ns> (2)
     resticSecretRef:
       name: <restic_secret_name>
     volumeSnapshotMoverBackupRef:
       sourcePVCData:
         name: <source_pvc_name>
         size: <source_pvc_size>
       resticrepository: <your_restic_repo>
       volumeSnapshotClassName: <vsclass_name>

   1	Specify the namespace where the volume snapshot exists.
   2	Specify the namespace where the Operator is installed. The default is openshift-adp.

3. You can back up a volume snapshot by performing the following steps:

   1. Create a backup CR:

      apiVersion: velero.io/v1
      kind: Backup
      metadata:
        name: <backup_name>
        namespace: <protected_ns> (1)
      spec:
        includedNamespaces:
        - <app_ns>
        storageLocation: velero-sample-1

      1	Specify the namespace where the Operator is installed. The default namespace is openshift-adp.

   2. Wait up to 10 minutes and check whether the VolumeSnapshotBackup CR status is Completed by entering the following commands:

      $ oc get vsb -n <app_ns>

      $ oc get vsb <vsb_name> -n <app_ns> -o jsonpath="{.status.phase}"

      A snapshot is created in the object store was configured in the DPA.

      If the status of the VolumeSnapshotBackup CR becomes Failed, refer to the Velero logs for troubleshooting.

4. You can restore a volume snapshot by performing the following steps:

   1. Delete the application namespace and the volumeSnapshotContent that was created by the Velero CSI plugin.

   2. Create a Restore CR and set restorePVs to true.

      Example Restore CR

      apiVersion: velero.io/v1
      kind: Restore
      metadata:
        name: <restore_name>
        namespace: <protected_ns>
      spec:
        backupName: <previous_backup_name>
        restorePVs: true

   3. Wait up to 10 minutes and check whether the VolumeSnapshotRestore CR status is Completed by entering the following command:

      $ oc get vsr -n <app_ns>

      $ oc get vsr <vsr_name> -n <app_ns> -o jsonpath="{.status.phase}"

   4. Check whether your application data and resources have been restored.

      If the status of the VolumeSnapshotRestore CR becomes ‘Failed’, refer to the Velero logs for troubleshooting.

Additional resources

• Installing Operators on clusters for administrators

• Installing Operators in namespaces for non-administrators

Creating backup hooks

You create backup hooks to run commands in a container in a pod by editing the Backup custom resource (CR).

Pre hooks run before the pod is backed up. Post hooks run after the backup.

Procedure

• Add a hook to the spec.hooks block of the Backup CR, as in the following example:

  apiVersion: velero.io/v1
  kind: Backup
  metadata:
    name: <backup>
    namespace: openshift-adp
  spec:
    hooks:
      resources:
        - name: <hook_name>
          includedNamespaces:
          - <namespace> (1)
          excludedNamespaces: (2)
          - <namespace>
          includedResources: []
          - pods (3)
          excludedResources: [] (4)
          labelSelector: (5)
            matchLabels:
              app: velero
              component: server
          pre: (6)
            - exec:
                container: <container> (7)
                command:
                - /bin/uname (8)
                - -a
                onError: Fail (9)
                timeout: 30s (10)
          post: (11)
  ...

  1	Optional: You can specify namespaces to which the hook applies. If this value is not specified, the hook applies to all namespaces.
  2	Optional: You can specify namespaces to which the hook does not apply.
  3	Currently, pods are the only supported resource that hooks can apply to.
  4	Optional: You can specify resources to which the hook does not apply.
  5	Optional: This hook only applies to objects matching the label. If this value is not specified, the hook applies to all namespaces.
  6	Array of hooks to run before the backup.
  7	Optional: If the container is not specified, the command runs in the first container in the pod.
  8	This is the entrypoint for the init container being added.
  9	Allowed values for error handling are Fail and Continue. The default is Fail.
  10	Optional: How long to wait for the commands to run. The default is 30s.
  11	This block defines an array of hooks to run after the backup, with the same parameters as the pre-backup hooks.

Scheduling backups

You schedule backups by creating a Schedule custom resource (CR) instead of a Backup CR.

Prerequisites

• You must install the OpenShift API for Data Protection (OADP) Operator.

• The DataProtectionApplication CR must be in a Ready state.

Procedure

1. Retrieve the backupStorageLocations CRs:

   $ oc get backupStorageLocations

   Example output

   NAME              PHASE       LAST VALIDATED   AGE   DEFAULT
   velero-sample-1   Available   11s              31m

2. Create a Schedule CR, as in the following example:

   $ cat << EOF | oc apply -f -
   apiVersion: velero.io/v1
   kind: Schedule
   metadata:
     name: <schedule>
     namespace: openshift-adp
   spec:
     schedule: 0 7 * * * (1)
     template:
       hooks: {}
       includedNamespaces:
       - <namespace> (2)
       storageLocation: <velero-sample-1> (3)
       defaultVolumesToRestic: true (4)
       ttl: 720h0m0s
   EOF

   1	cron expression to schedule the backup, for example, 0 7 * to perform a backup every day at 7:00.
   2	Array of namespaces to back up.
   3	Name of the backupStorageLocations CR.
   4	Optional: Add the defaultVolumesToRestic: true key-value pair if you are backing up volumes with Restic.

3. Verify that the status of the Schedule CR is Completed after the scheduled backup runs:

   $ oc get schedule -n openshift-adp <schedule> -o jsonpath='{.status.phase}'