Monitoring bare-metal events with the Bare Metal Event Relay

About bare-metal events

Use the Bare Metal Event Relay to subscribe applications that run in your OKD cluster to events that are generated on the underlying bare-metal host. The Redfish service publishes events on a node and transmits them on an advanced message queue to subscribed applications.

Bare-metal events are based on the open Redfish standard that is developed under the guidance of the Distributed Management Task Force (DMTF). Redfish provides a secure industry-standard protocol with a REST API. The protocol is used for the management of distributed, converged or software-defined resources and infrastructure.

Hardware-related events published through Redfish includes:

• Breaches of temperature limits

• Server status

• Fan status

Begin using bare-metal events by deploying the Bare Metal Event Relay Operator and subscribing your application to the service. The Bare Metal Event Relay Operator installs and manages the lifecycle of the Redfish bare-metal event service.

How bare-metal events work

The Bare Metal Event Relay enables applications running on bare-metal clusters to respond quickly to Redfish hardware changes and failures such as breaches of temperature thresholds, fan failure, disk loss, power outages, and memory failure. These hardware events are delivered over a reliable low-latency transport channel based on Advanced Message Queuing Protocol (AMQP). The latency of the messaging service is between 10 to 20 milliseconds.

The Bare Metal Event Relay provides a publish-subscribe service for the hardware events, where multiple applications can use REST APIs to subscribe and consume the events. The Bare Metal Event Relay supports hardware that complies with Redfish OpenAPI v1.8 or higher.

Bare Metal Event Relay data flow

The following figure illustrates an example of bare-metal events data flow:

Figure 1. Bare Metal Event Relay data flow

Operator-managed pod

The Operator uses custom resources to manage the pod containing the Bare Metal Event Relay and its components using the HardwareEvent CR.

Bare Metal Event Relay

At startup, the Bare Metal Event Relay queries the Redfish API and downloads all the message registries, including custom registries. The Bare Metal Event Relay then begins to receive subscribed events from the Redfish hardware.

The Bare Metal Event Relay enables applications running on bare-metal clusters to respond quickly to Redfish hardware changes and failures such as breaches of temperature thresholds, fan failure, disk loss, power outages, and memory failure. The events are reported using the HardwareEvent CR.

Cloud native event

Cloud native events (CNE) is a REST API specification for defining the format of event data.

CNCF CloudEvents

CloudEvents is a vendor-neutral specification developed by the Cloud Native Computing Foundation (CNCF) for defining the format of event data.

AMQP dispatch router

The dispatch router is responsible for the message delivery service between publisher and subscriber. AMQP 1.0 qpid is an open standard that supports reliable, high-performance, fully-symmetrical messaging over the internet.

Cloud event proxy sidecar

The cloud event proxy sidecar container image is based on the ORAN API specification and provides a publish-subscribe event framework for hardware events.

Redfish message parsing service

In addition to handling Redfish events, the Bare Metal Event Relay provides message parsing for events without a Message property. The proxy downloads all the Redfish message registries including vendor specific registries from the hardware when it starts. If an event does not contain a Message property, the proxy uses the Redfish message registries to construct the Message and Resolution properties and add them to the event before passing the event to the cloud events framework. This service allows Redfish events to have smaller message size and lower transmission latency.

Installing the Bare Metal Event Relay using the CLI

As a cluster administrator, you can install the Bare Metal Event Relay Operator by using the CLI.

Prerequisites

• A cluster that is installed on bare-metal hardware with nodes that have a RedFish-enabled Baseboard Management Controller (BMC).

• Install the OpenShift CLI (oc).

• Log in as a user with cluster-admin privileges.

Procedure

1. Create a namespace for the Bare Metal Event Relay.

   1. Save the following YAML in the bare-metal-events-namespace.yaml file:

      apiVersion: v1
      kind: Namespace
      metadata:
        name: openshift-bare-metal-events
        labels:
          name: openshift-bare-metal-events
          openshift.io/cluster-monitoring: "true"

   2. Create the Namespace CR:

      $ oc create -f bare-metal-events-namespace.yaml

2. Create an Operator group for the Bare Metal Event Relay Operator.

   1. Save the following YAML in the bare-metal-events-operatorgroup.yaml file:

      apiVersion: operators.coreos.com/v1
      kind: OperatorGroup
      metadata:
        name: bare-metal-event-relay-group
        namespace: openshift-bare-metal-events
      spec:
        targetNamespaces:
        - openshift-bare-metal-events

   2. Create the OperatorGroup CR:

      $ oc create -f bare-metal-events-operatorgroup.yaml

3. Subscribe to the Bare Metal Event Relay.

   1. Save the following YAML in the bare-metal-events-sub.yaml file:

      apiVersion: operators.coreos.com/v1alpha1
      kind: Subscription
      metadata:
        name: bare-metal-event-relay-subscription
        namespace: openshift-bare-metal-events
      spec:
        channel: "stable"
        name: bare-metal-event-relay
        source: redhat-operators
        sourceNamespace: openshift-marketplace

   2. Create the Subscription CR:

      $ oc create -f bare-metal-events-sub.yaml

Verification

To verify that the Bare Metal Event Relay Operator is installed, run the following command:

$ oc get csv -n openshift-bare-metal-events -o custom-columns=Name:.metadata.name,Phase:.status.phase

Example output

Name                                                          Phase
bare-metal-event-relay.4.12.0-xxxxxxxxxxxx            Succeeded

Installing the Bare Metal Event Relay using the web console

As a cluster administrator, you can install the Bare Metal Event Relay Operator using the web console.

Prerequisites

• A cluster that is installed on bare-metal hardware with nodes that have a RedFish-enabled Baseboard Management Controller (BMC).

• Log in as a user with cluster-admin privileges.

Procedure

1. Install the Bare Metal Event Relay using the OKD web console:

   1. In the OKD web console, click Operators → OperatorHub.

   2. Choose Bare Metal Event Relay from the list of available Operators, and then click Install.

   3. On the Install Operator page, select or create a Namespace, select openshift-bare-metal-events, and then click Install.

Verification

Optional: You can verify that the Operator installed successfully by performing the following check:

1. Switch to the Operators → Installed Operators page.

2. Ensure that Bare Metal Event Relay is listed in the project with a Status of InstallSucceeded.

   During installation an Operator might display a Failed status. If the installation later succeeds with an InstallSucceeded message, you can ignore the Failed message.

If the operator does not appear as installed, to troubleshoot further:

• Go to the Operators → Installed Operators page and inspect the Operator Subscriptions and Install Plans tabs for any failure or errors under Status.

• Go to the Workloads → Pods page and check the logs for pods in the project namespace.

Installing the AMQ messaging bus

To pass Redfish bare-metal event notifications between publisher and subscriber on a node, you must install and configure an AMQ messaging bus to run locally on the node. You do this by installing the AMQ Interconnect Operator for use in the cluster.

Prerequisites

• Install the OKD CLI (oc).

• Log in as a user with cluster-admin privileges.

Procedure

• Install the AMQ Interconnect Operator to its own amq-interconnect namespace. See Installing the AMQ Interconnect Operator.

Verification

1. Verify that the AMQ Interconnect Operator is available and the required pods are running:

   $ oc get pods -n amq-interconnect

   Example output

   NAME                                    READY   STATUS    RESTARTS   AGE
   amq-interconnect-645db76c76-k8ghs       1/1     Running   0          23h
   interconnect-operator-5cb5fc7cc-4v7qm   1/1     Running   0          23h

2. Verify that the required bare-metal-event-relay bare-metal event producer pod is running in the openshift-bare-metal-events namespace:

   $ oc get pods -n openshift-bare-metal-events

   Example output

   NAME                                                            READY   STATUS    RESTARTS   AGE
   hw-event-proxy-operator-controller-manager-74d5649b7c-dzgtl     2/2     Running   0          25s

Subscribing to Redfish BMC bare-metal events for a cluster node

As a cluster administrator, you can subscribe to Redfish BMC events generated on a node in your cluster by creating a BMCEventSubscription custom resource (CR) for the node, creating a HardwareEvent CR for the event, and a Secret CR for the BMC.

Subscribing to bare-metal events

You can configure the baseboard management controller (BMC) to send bare-metal events to subscribed applications running in an OKD cluster. Example Redfish bare-metal events include an increase in device temperature, or removal of a device. You subscribe applications to bare-metal events using a REST API.

Perform the following procedure to subscribe to bare-metal events for the node using a BMCEventSubscription CR.

Prerequisites

• Install the OpenShift CLI (oc).

• Log in as a user with cluster-admin privileges.

• Get the user name and password for the BMC.

• Deploy a bare-metal node with a Redfish-enabled Baseboard Management Controller (BMC) in your cluster, and enable Redfish events on the BMC.

  Enabling Redfish events on specific hardware is outside the scope of this information. For more information about enabling Redfish events for your specific hardware, consult the BMC manufacturer documentation.

Procedure

1. Confirm that the node hardware has the Redfish EventService enabled by running the following curl command:

   curl https://<bmc_ip_address>/redfish/v1/EventService --insecure -H 'Content-Type: application/json' -u "<bmc_username>:<password>"

   where:

   bmc_ip_address

   is the IP address of the BMC where the Redfish events are generated.

   Example output

   {
      "@odata.context": "/redfish/v1/$metadata#EventService.EventService",
      "@odata.id": "/redfish/v1/EventService",
      "@odata.type": "#EventService.v1_0_2.EventService",
      "Actions": {
         "#EventService.SubmitTestEvent": {
            "EventType@Redfish.AllowableValues": ["StatusChange", "ResourceUpdated", "ResourceAdded", "ResourceRemoved", "Alert"],
            "target": "/redfish/v1/EventService/Actions/EventService.SubmitTestEvent"
         }
      },
      "DeliveryRetryAttempts": 3,
      "DeliveryRetryIntervalSeconds": 30,
      "Description": "Event Service represents the properties for the service",
      "EventTypesForSubscription": ["StatusChange", "ResourceUpdated", "ResourceAdded", "ResourceRemoved", "Alert"],
      "EventTypesForSubscription@odata.count": 5,
      "Id": "EventService",
      "Name": "Event Service",
      "ServiceEnabled": true,
      "Status": {
         "Health": "OK",
         "HealthRollup": "OK",
         "State": "Enabled"
      },
      "Subscriptions": {
         "@odata.id": "/redfish/v1/EventService/Subscriptions"
      }
   }

2. Get the Bare Metal Event Relay service route for the cluster by running the following command:

   $ oc get route -n openshift-bare-metal-events

   Example output

   NAME             HOST/PORT                                                                                           PATH   SERVICES                 PORT   TERMINATION   WILDCARD
   hw-event-proxy   hw-event-proxy-openshift-bare-metal-events.apps.compute-1.example.com          hw-event-proxy-service   9087   edge          None

3. Create a BMCEventSubscription resource to subscribe to the Redfish events:

   1. Save the following YAML in the bmc_sub.yaml file:

      apiVersion: metal3.io/v1alpha1
      kind: BMCEventSubscription
      metadata:
        name: sub-01
        namespace: openshift-machine-api
      spec:
         hostName: <hostname> (1)
         destination: <proxy_service_url> (2)
         context: ''

      1	Specifies the name or UUID of the worker node where the Redfish events are generated.
      2	Specifies the bare-metal event proxy service, for example, https://hw-event-proxy-openshift-bare-metal-events.apps.compute-1.example.com/webhook.

   2. Create the BMCEventSubscription CR:

      $ oc create -f bmc_sub.yaml

4. Optional: To delete the BMC event subscription, run the following command:

   $ oc delete -f bmc_sub.yaml

5. Optional: To manually create a Redfish event subscription without creating a BMCEventSubscription CR, run the following curl command, specifying the BMC username and password.

   $ curl -i -k -X POST -H "Content-Type: application/json"  -d '{"Destination": "https://<proxy_service_url>", "Protocol" : "Redfish", "EventTypes": ["Alert"], "Context": "root"}' -u <bmc_username>:<password> 'https://<bmc_ip_address>/redfish/v1/EventService/Subscriptions' –v

   where:

   proxy_service_url

   is the bare-metal event proxy service, for example, [https://hw-event-proxy-openshift-bare-metal-events.apps.compute-1.example.com/webhook](https://hw-event-proxy-openshift-bare-metal-events.apps.compute-1.example.com/webhook).

   bmc_ip_address

   is the IP address of the BMC where the Redfish events are generated.

   Example output

   HTTP/1.1 201 Created
   Server: AMI MegaRAC Redfish Service
   Location: /redfish/v1/EventService/Subscriptions/1
   Allow: GET, POST
   Access-Control-Allow-Origin: *
   Access-Control-Expose-Headers: X-Auth-Token
   Access-Control-Allow-Headers: X-Auth-Token
   Access-Control-Allow-Credentials: true
   Cache-Control: no-cache, must-revalidate
   Link: <http://redfish.dmtf.org/schemas/v1/EventDestination.v1_6_0.json>; rel=describedby
   Link: <http://redfish.dmtf.org/schemas/v1/EventDestination.v1_6_0.json>
   Link: </redfish/v1/EventService/Subscriptions>; path=
   ETag: "1651135676"
   Content-Type: application/json; charset=UTF-8
   OData-Version: 4.0
   Content-Length: 614
   Date: Thu, 28 Apr 2022 08:47:57 GMT

Querying Redfish bare-metal event subscriptions with curl

Some hardware vendors limit the amount of Redfish hardware event subscriptions. You can query the number of Redfish event subscriptions by using curl.

Prerequisites

• Get the user name and password for the BMC.

• Deploy a bare-metal node with a Redfish-enabled Baseboard Management Controller (BMC) in your cluster, and enable Redfish hardware events on the BMC.

Procedure

1. Check the current subscriptions for the BMC by running the following curl command:

   $ curl --globoff -H "Content-Type: application/json" -k -X GET --user <bmc_username>:<password> https://<bmc_ip_address>/redfish/v1/EventService/Subscriptions

   where:

   bmc_ip_address

   is the IP address of the BMC where the Redfish events are generated.

   Example output

   % Total % Received % Xferd Average Speed Time Time Time Current
   Dload Upload Total Spent Left Speed
   100 435 100 435 0 0 399 0 0:00:01 0:00:01 --:--:-- 399
   {
     "@odata.context": "/redfish/v1/$metadata#EventDestinationCollection.EventDestinationCollection",
     "@odata.etag": ""
     1651137375 "",
     "@odata.id": "/redfish/v1/EventService/Subscriptions",
     "@odata.type": "#EventDestinationCollection.EventDestinationCollection",
     "Description": "Collection for Event Subscriptions",
     "Members": [
     {
       "@odata.id": "/redfish/v1/EventService/Subscriptions/1"
     }],
     "Members@odata.count": 1,
     "Name": "Event Subscriptions Collection"
   }

   In this example, a single subscription is configured: /redfish/v1/EventService/Subscriptions/1.

2. Optional: To remove the /redfish/v1/EventService/Subscriptions/1 subscription with curl, run the following command, specifying the BMC username and password:

   $ curl --globoff -L -w "%{http_code} %{url_effective}\n" -k -u <bmc_username>:<password >-H "Content-Type: application/json" -d '{}' -X DELETE https://<bmc_ip_address>/redfish/v1/EventService/Subscriptions/1

   where:

   bmc_ip_address

   is the IP address of the BMC where the Redfish events are generated.

Creating the bare-metal event and Secret CRs

To start using bare-metal events, create the HardwareEvent custom resource (CR) for the host where the Redfish hardware is present. Hardware events and faults are reported in the hw-event-proxy logs.

Prerequisites

• Install the OpenShift CLI (oc).

• Log in as a user with cluster-admin privileges.

• Install the Bare Metal Event Relay.

• Create a BMCEventSubscription CR for the BMC Redfish hardware.

Procedure

1. Create the HardwareEvent custom resource (CR):

   1. Save the following YAML in the hw-event.yaml file:

      apiVersion: "event.redhat-cne.org/v1alpha1"
      kind: "HardwareEvent"
      metadata:
        name: "hardware-event"
      spec:
        nodeSelector:
          node-role.kubernetes.io/hw-event: "" (1)
        transportHost: "amqp://amq-router-service-name.amq-namespace.svc.cluster.local" (2)
        logLevel: "debug" (3)
        msgParserTimeout: "10" (4)

      1	Required. Use the nodeSelector field to target nodes with the specified label, for example, node-role.kubernetes.io/hw-event: “”.
      2	Required. AMQP host that delivers the events at the transport layer using the AMQP protocol.
      3	Optional. The default value is debug. Sets the log level in hw-event-proxy logs. The following log levels are available: fatal, error, warning, info, debug, trace.
      4	Optional. Sets the timeout value in milliseconds for the Message Parser. If a message parsing request is not responded to within the timeout duration, the original hardware event message is passed to the cloud native event framework. The default value is 10.

   2. Create the HardwareEvent CR:

      $ oc create -f hardware-event.yaml

2. Create a BMC username and password Secret CR that enables the hardware events proxy to access the Redfish message registry for the bare-metal host.

   1. Save the following YAML in the hw-event-bmc-secret.yaml file:

      apiVersion: v1
      kind: Secret
      metadata:
        name: redfish-basic-auth
      type: Opaque
      stringData: (1)
        username: <bmc_username>
        password: <bmc_password>
        # BMC host DNS or IP address
        hostaddr: <bmc_host_ip_address>

      1	Enter plain text values for the various items under stringData.

   2. Create the Secret CR:

      $ oc create -f hw-event-bmc-secret.yaml

Subscribing applications to bare-metal events REST API reference

Use the bare-metal events REST API to subscribe an application to the bare-metal events that are generated on the parent node.

Subscribe applications to Redfish events by using the resource address /cluster/node/<node_name>/redfish/event, where <node_name> is the cluster node running the application.

Deploy your cloud-event-consumer application container and cloud-event-proxy sidecar container in a separate application pod. The cloud-event-consumer application subscribes to the cloud-event-proxy container in the application pod.

Use the following API endpoints to subscribe the cloud-event-consumer application to Redfish events posted by the cloud-event-proxy container at http://localhost:8089/api/cloudNotifications/v1/ in the application pod:

• /api/cloudNotifications/v1/subscriptions

  • POST: Creates a new subscription

  • GET: Retrieves a list of subscriptions

• /api/cloudNotifications/v1/subscriptions/<subscription_id>

  • GET: Returns details for the specified subscription ID

• api/cloudNotifications/v1/subscriptions/status/<subscription_id>

  • PUT: Creates a new status ping request for the specified subscription ID

• /api/cloudNotifications/v1/health

  • GET: Returns the health status of cloudNotifications API

api/cloudNotifications/v1/subscriptions

HTTP method

GET api/cloudNotifications/v1/subscriptions

Description

Returns a list of subscriptions. If subscriptions exist, a 200 OK status code is returned along with the list of subscriptions.

Example API response

[
 {
  "id": "ca11ab76-86f9-428c-8d3a-666c24e34d32",
  "endpointUri": "http://localhost:9089/api/cloudNotifications/v1/dummy",
  "uriLocation": "http://localhost:8089/api/cloudNotifications/v1/subscriptions/ca11ab76-86f9-428c-8d3a-666c24e34d32",
  "resource": "/cluster/node/openshift-worker-0.openshift.example.com/redfish/event"
 }
]

HTTP method

POST api/cloudNotifications/v1/subscriptions

Description

Creates a new subscription. If a subscription is successfully created, or if it already exists, a 201 Created status code is returned.

Example payload

{
  "uriLocation": "http://localhost:8089/api/cloudNotifications/v1/subscriptions",
  "resource": "/cluster/node/openshift-worker-0.openshift.example.com/redfish/event"
}

api/cloudNotifications/v1/subscriptions/<subscription_id>

HTTP method

GET api/cloudNotifications/v1/subscriptions/<subscription_id>

Description

Returns details for the subscription with ID <subscription_id>

Example API response

{
  "id":"ca11ab76-86f9-428c-8d3a-666c24e34d32",
  "endpointUri":"http://localhost:9089/api/cloudNotifications/v1/dummy",
  "uriLocation":"http://localhost:8089/api/cloudNotifications/v1/subscriptions/ca11ab76-86f9-428c-8d3a-666c24e34d32",
  "resource":"/cluster/node/openshift-worker-0.openshift.example.com/redfish/event"
}

api/cloudNotifications/v1/subscriptions/status/<subscription_id>

HTTP method

PUT api/cloudNotifications/v1/subscriptions/status/<subscription_id>

Description

Creates a new status ping request for subscription with ID <subscription_id>. If a subscription is present, the status request is successful and a 202 Accepted status code is returned.

Example API response

{"status":"ping sent"}

api/cloudNotifications/v1/health/

HTTP method

GET api/cloudNotifications/v1/health/

Description

Returns the health status for the cloudNotifications REST API.

Example API response

OK