Installing a cluster on OpenStack that supports OVS-DPDK-connected compute machines

If your Red Hat OpenStack Platform (RHOSP) deployment has Open vSwitch with the Data Plane Development Kit (OVS-DPDK) enabled, you can install an OKD cluster on it. Clusters that run on such RHOSP deployments use OVS-DPDK features by providing access to poll mode drivers.

Prerequisites

• Review details about the OKD installation and update processes.

  • Verify that OKD 4.10 is compatible with your RHOSP version by using the “Supported platforms for OpenShift clusters” section. You can also compare platform support across different versions by viewing the OKD on RHOSP support matrix.

• Have a storage service installed in RHOSP, like block storage (Cinder) or object storage (Swift). Object storage is the recommended storage technology for OKD registry cluster deployment. For more information, see Optimizing storage.

• Have the metadata service enabled in RHOSP.

• Plan your RHOSP OVS-DPDK deployment by referring to Planning your OVS-DPDK deployment in the Network Functions Virtualization Planning and Configuration Guide.

• Configure your RHOSP OVS-DPDK deployment according to Configuring an OVS-DPDK deployment in the Network Functions Virtualization Planning and Configuration Guide.

  • You must complete Creating a flavor and deploying an instance for OVS-DPDK before you install a cluster on RHOSP.

Resource guidelines for installing OKD on RHOSP

To support an OKD installation, your Red Hat OpenStack Platform (RHOSP) quota must meet the following requirements:

A cluster might function with fewer than recommended resources, but its performance is not guaranteed.

An OKD deployment comprises control plane machines, compute machines, and a bootstrap machine.

Control plane and compute machines

By default, the OKD installation process stands up three control plane and three compute machines.

Each machine requires:

• An instance from the RHOSP quota

• A port from the RHOSP quota

• A flavor with at least 16 GB memory, 4 vCPUs, and 25 GB storage space

Additionally, for clusters that use single-root input/output virtualization (SR-IOV), RHOSP compute nodes require a flavor that supports huge pages.

Additional resources

• For more information about configuring performant RHOSP compute nodes, see Configuring Compute nodes for performance.

Bootstrap machine

During installation, a bootstrap machine is temporarily provisioned to stand up the control plane. After the production control plane is ready, the bootstrap machine is deprovisioned.

The bootstrap machine requires:

• An instance from the RHOSP quota

• A port from the RHOSP quota

• A flavor with at least 16 GB memory, 4 vCPUs, and 25 GB storage space

Enabling Swift on RHOSP

Swift is operated by a user account with the swiftoperator role. Add the role to an account before you run the installation program.

Prerequisites

• You have a RHOSP administrator account on the target environment.

• The Swift service is installed.

• On Ceph RGW, the account in url option is enabled.

Procedure

To enable Swift on RHOSP:

1. As an administrator in the RHOSP CLI, add the swiftoperator role to the account that will access Swift:

   $ openstack role add --user <user> --project <project> swiftoperator

Your RHOSP deployment can now use Swift for the image registry.

Verifying external network access

The OKD installation process requires external network access. You must provide an external network value to it, or deployment fails. Before you begin the process, verify that a network with the external router type exists in Red Hat OpenStack Platform (RHOSP).

Prerequisites

• Configure OpenStack’s networking service to have DHCP agents forward instances’ DNS queries

Procedure

1. Using the RHOSP CLI, verify the name and ID of the ‘External’ network:

   $ openstack network list --long -c ID -c Name -c "Router Type"

   Example output

   +--------------------------------------+----------------+-------------+
   | ID                                   | Name           | Router Type |
   +--------------------------------------+----------------+-------------+
   | 148a8023-62a7-4672-b018-003462f8d7dc | public_network | External    |
   +--------------------------------------+----------------+-------------+

A network with an external router type appears in the network list. If at least one does not, see Creating a default floating IP network and Creating a default provider network.

Defining parameters for the installation program

The OKD installation program relies on a file that is called clouds.yaml. The file describes Red Hat OpenStack Platform (RHOSP) configuration parameters, including the project name, log in information, and authorization service URLs.

Procedure

1. Create the clouds.yaml file:

   • If your RHOSP distribution includes the Horizon web UI, generate a clouds.yaml file in it.

     Remember to add a password to the auth field. You can also keep secrets in a separate file from clouds.yaml.

   • If your RHOSP distribution does not include the Horizon web UI, or you do not want to use Horizon, create the file yourself. For detailed information about clouds.yaml, see Config files in the RHOSP documentation.

     clouds:
       shiftstack:
         auth:
           auth_url: http://10.10.14.42:5000/v3
           project_name: shiftstack
           username: shiftstack_user
           password: XXX
           user_domain_name: Default
           project_domain_name: Default
       dev-env:
         region_name: RegionOne
         auth:
           username: 'devuser'
           password: XXX
           project_name: 'devonly'
           auth_url: 'https://10.10.14.22:5001/v2.0'

2. If your RHOSP installation uses self-signed certificate authority (CA) certificates for endpoint authentication:

   1. Copy the certificate authority file to your machine.

   2. Add the cacerts key to the clouds.yaml file. The value must be an absolute, non-root-accessible path to the CA certificate:

      clouds:
        shiftstack:
          ...
          cacert: "/etc/pki/ca-trust/source/anchors/ca.crt.pem"

      After you run the installer with a custom CA certificate, you can update the certificate by editing the value of the ca-cert.pem key in the cloud-provider-config keymap. On a command line, run: $ oc edit configmap -n openshift-config cloud-provider-config

3. Place the clouds.yaml file in one of the following locations:

   1. The value of the OS_CLIENT_CONFIG_FILE environment variable

   2. The current directory

   3. A Unix-specific user configuration directory, for example ~/.config/openstack/clouds.yaml

   4. A Unix-specific site configuration directory, for example /etc/openstack/clouds.yaml

      The installation program searches for clouds.yaml in that order.

Obtaining the installation program

Before you install OKD, download the installation file on a local computer.

Prerequisites

• You have a computer that runs Linux or macOS, with 500 MB of local disk space

Procedure

1. Download installer from https://github.com/openshift/okd/releases

   The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OKD uninstallation procedures for your specific cloud provider.

2. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar -xvf openshift-install-linux.tar.gz

3. Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OKD components.

   Using a pull secret from the Red Hat OpenShift Cluster Manager is not required. You can use a pull secret for another private registry. Or, if you do not need the cluster to pull images from a private registry, you can use {"auths":{"fake":{"auth":"aWQ6cGFzcwo="}}} as the pull secret when prompted during the installation.

   If you do not use the pull secret from the Red Hat OpenShift Cluster Manager:

   • Red Hat Operators are not available.

   • The Telemetry and Insights operators do not send data to Red Hat.

   • Content from the Red Hat Container Catalog registry, such as image streams and Operators, are not available.

Creating the installation configuration file

You can customize the OKD cluster you install on

Prerequisites

• Obtain the OKD installation program and the pull secret for your cluster.

• Obtain service principal permissions at the subscription level.

Procedure

1. Create the install-config.yaml file.

   1. Change to the directory that contains the installation program and run the following command:

      $ ./openshift-install create install-config --dir <installation_directory> (1)

      1	For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OKD version.

   2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

         For production OKD clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Enter a descriptive name for your cluster.

      3. Paste the pull secret from the Red Hat OpenShift Cluster Manager. This field is optional.

1. Modify the install-config.yaml file. You can find more information about the available parameters in the “Installation configuration parameters” section.

2. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OKD cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

• You have an existing install-config.yaml file.

• You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.

  The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration. For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

1. Edit your install-config.yaml file and add the proxy settings. For example:

   apiVersion: v1
   baseDomain: my.domain.com
   proxy:
     httpProxy: http://<username>:<pswd>@<ip>:<port> (1)
     httpsProxy: https://<username>:<pswd>@<ip>:<port> (2)
     noProxy: example.com (3)
   additionalTrustBundle: | (4)
       -----BEGIN CERTIFICATE-----
       <MY_TRUSTED_CA_CERT>
       -----END CERTIFICATE-----
   ...

   1	A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
   2	A proxy URL to use for creating HTTPS connections outside the cluster.
   3	A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
   4	If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Fedora CoreOS (FCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the FCOS trust bundle.

   The installation program does not support the proxy readinessEndpoints field.

2. Save the file and reference it when installing OKD.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Installation configuration parameters

Before you deploy an OKD cluster, you provide parameter values to describe your account on the cloud platform that hosts your cluster and optionally customize your cluster’s platform. When you create the install-config.yaml installation configuration file, you provide values for the required parameters through the command line. If you customize your cluster, you can modify the install-config.yaml file to provide more details about the platform.

Required configuration parameters

Required installation configuration parameters are described in the following table:

Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Only IPv4 addresses are supported.

networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23

networking:
  serviceNetwork:
   - 172.30.0.0/16

networking:
  machineNetwork:
  - cidr: 10.0.0.0/16

Optional configuration parameters

Optional installation configuration parameters are described in the following table:

sshKey:
  <key1>
  <key2>
  <key3>

Custom subnets in RHOSP deployments

Optionally, you can deploy a cluster on a Red Hat OpenStack Platform (RHOSP) subnet of your choice. The subnet’s GUID is passed as the value of platform.openstack.machinesSubnet in the install-config.yaml file.

This subnet is used as the cluster’s primary subnet. By default, nodes and ports are created on it. You can create nodes and ports on a different RHOSP subnet by setting the value of the platform.openstack.machinesSubnet property to the subnet’s UUID.

Before you run the OKD installer with a custom subnet, verify that your configuration meets the following requirements:

• The subnet that is used by platform.openstack.machinesSubnet has DHCP enabled.

• The CIDR of platform.openstack.machinesSubnet matches the CIDR of networking.machineNetwork.

• The installation program user has permission to create ports on this network, including ports with fixed IP addresses.

Clusters that use custom subnets have the following limitations:

• If you plan to install a cluster that uses floating IP addresses, the platform.openstack.machinesSubnet subnet must be attached to a router that is connected to the externalNetwork network.

• If the platform.openstack.machinesSubnet value is set in the install-config.yaml file, the installation program does not create a private network or subnet for your RHOSP machines.

• You cannot use the platform.openstack.externalDNS property at the same time as a custom subnet. To add DNS to a cluster that uses a custom subnet, configure DNS on the RHOSP network.

Deploying a cluster with bare metal machines

If you want your cluster to use bare metal machines, modify the inventory.yaml file. Your cluster can have both control plane and compute machines running on bare metal, or just compute machines.

Bare-metal compute machines are not supported on clusters that use Kuryr.

Prerequisites

• The RHOSP Bare Metal service (Ironic) is enabled and accessible via the RHOSP Compute API.

• Bare metal is available as a RHOSP flavor.

• The RHOSP network supports both VM and bare metal server attachment.

• Your network configuration does not rely on a provider network. Provider networks are not supported.

• If you want to deploy the machines on a pre-existing network, a RHOSP subnet is provisioned.

• If you want to deploy the machines on an installer-provisioned network, the RHOSP Bare Metal service (Ironic) is able to listen for and interact with Preboot eXecution Environment (PXE) boot machines that run on tenant networks.

• You created an inventory.yaml file as part of the OKD installation process.

Procedure

1. In the inventory.yaml file, edit the flavors for machines:

   1. If you want to use bare-metal control plane machines, change the value of os_flavor_master to a bare metal flavor.

   2. Change the value of os_flavor_worker to a bare metal flavor.

      An example bare metal inventory.yaml file

      all:
        hosts:
          localhost:
            ansible_connection: local
            ansible_python_interpreter: "{{ansible_playbook_python}}"
            # User-provided values
            os_subnet_range: '10.0.0.0/16'
            os_flavor_master: 'my-bare-metal-flavor' (1)
            os_flavor_worker: 'my-bare-metal-flavor' (2)
            os_image_rhcos: 'rhcos'
            os_external_network: 'external'
      ...

      1	If you want to have bare-metal control plane machines, change this value to a bare metal flavor.
      2	Change this value to a bare metal flavor to use for compute machines.

Use the updated inventory.yaml file to complete the installation process. Machines that are created during deployment use the flavor that you added to the file.

./openshift-install wait-for install-complete —log-level debug

Sample customized install-config.yaml file for RHOSP

This sample install-config.yaml demonstrates all of the possible Red Hat OpenStack Platform (RHOSP) customization options.

apiVersion: v1
baseDomain: example.com
controlPlane:
  name: master
  platform: {}
  replicas: 3
compute:
- name: worker
  platform:
    openstack:
      type: ml.large
  replicas: 3
metadata:
  name: example
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  serviceNetwork:
  - 172.30.0.0/16
  networkType: OVNKubernetes
platform:
  openstack:
    cloud: mycloud
    externalNetwork: external
    computeFlavor: m1.xlarge
    apiFloatingIP: 128.0.0.1
pullSecret: '{"auths": ...}'
sshKey: ssh-ed25519 AAAA...

Generating a key pair for cluster node SSH access

During an OKD installation, you can provide an SSH public key to the installation program. The key is passed to the Fedora CoreOS (FCOS) nodes through their Ignition config files and is used to authenticate SSH access to the nodes. The key is added to the ~/.ssh/authorized_keys list for the core user on each node, which enables password-less authentication.

After the key is passed to the nodes, you can use the key pair to SSH in to the FCOS nodes as the user core. To access the nodes through SSH, the private key identity must be managed by SSH for your local user.

If you want to SSH in to your cluster nodes to perform installation debugging or disaster recovery, you must provide the SSH public key during the installation process. The ./openshift-install gather command also requires the SSH public key to be in place on the cluster nodes.

Procedure

1. If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> (1)

   1	Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

   If you plan to install an OKD cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

2. View the public SSH key:

   $ cat <path>/<file_name>.pub

   For example, run the following to view the ~/.ssh/id_rsa.pub public key:

   $ cat ~/.ssh/id_rsa.pub

3. Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.

   On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.

   1. If the ssh-agent process is not already running for your local user, start it as a background task:

      $ eval "$(ssh-agent -s)"

      Example output

      Agent pid 31874

      If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

4. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> (1)

   1	Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

   Example output

   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

Next steps

• When you install OKD, provide the SSH public key to the installation program.

Enabling access to the environment

At deployment, all OKD machines are created in a Red Hat OpenStack Platform (RHOSP)-tenant network. Therefore, they are not accessible directly in most RHOSP deployments.

You can configure OKD API and application access by using floating IP addresses (FIPs) during installation. You can also complete an installation without configuring FIPs, but the installer will not configure a way to reach the API or applications externally.

Enabling access with floating IP addresses

Create floating IP (FIP) addresses for external access to the OKD API and cluster applications.

Procedure

1. Using the Red Hat OpenStack Platform (RHOSP) CLI, create the API FIP:

   $ openstack floating ip create --description "API <cluster_name>.<base_domain>" <external_network>

2. Using the Red Hat OpenStack Platform (RHOSP) CLI, create the apps, or Ingress, FIP:

   $ openstack floating ip create --description "Ingress <cluster_name>.<base_domain>" <external_network>

3. Add records that follow these patterns to your DNS server for the API and Ingress FIPs:

   api.<cluster_name>.<base_domain>.  IN  A  <API_FIP>
   *.apps.<cluster_name>.<base_domain>. IN  A <apps_FIP>

   If you do not control the DNS server, you can add the record to your /etc/hosts file. This action makes the API accessible to only you, which is not suitable for production deployment but does allow installation for development and testing.

4. Add the FIPs to the install-config.yaml file as the values of the following parameters:

   • platform.openstack.ingressFloatingIP

   • platform.openstack.apiFloatingIP

If you use these values, you must also enter an external network as the value of the platform.openstack.externalNetwork parameter in the install-config.yaml file.

Completing installation without floating IP addresses

You can install OKD on Red Hat OpenStack Platform (RHOSP) without providing floating IP addresses.

In the file, do not define the following

If you run the installer from a system that cannot reach the cluster API due to a lack of floating IP addresses or name resolution, installation fails. To prevent installation failure in these cases, you can use a proxy network or run the installer from a system that is on the same network as your machines.

api.<cluster_name>.<base_domain>.  IN  A  <api_port_IP>
*.apps.<cluster_name>.<base_domain>. IN  A <ingress_port_IP>

Creating SR-IOV networks for compute machines

If your Red Hat OpenStack Platform (RHOSP) deployment supports single root I/O virtualization (SR-IOV), you can provision SR-IOV networks that compute machines run on.

Prerequisites

• Your cluster supports SR-IOV.

  If you are unsure about what your cluster supports, review the OKD SR-IOV hardware networks documentation.

• You created radio and uplink provider networks as part of your RHOSP deployment. The names radio and uplink are used in all example commands to represent these networks.

Procedure

1. On a command line, create a radio RHOSP network:

   $ openstack network create radio --provider-physical-network radio --provider-network-type flat --external

2. Create an uplink RHOSP network:

   $ openstack network create uplink --provider-physical-network uplink --provider-network-type vlan --external

3. Create a subnet for the radio network:

   $ openstack subnet create --network radio --subnet-range <radio_network_subnet_range> radio

4. Create a subnet for the uplink network:

   $ openstack subnet create --network uplink --subnet-range <uplink_network_subnet_range> uplink

Deploying the cluster

You can install OKD on a compatible cloud platform.

Prerequisites

• Configure an account with the cloud platform that hosts your cluster.

• Obtain the OKD installation program and the pull secret for your cluster.

Procedure

1. Change to the directory that contains the installation program and initialize the cluster deployment:

   $ ./openshift-install create cluster --dir <installation_directory> \ (1)
       --log-level=info (2)

   1	For <installation_directory>, specify the
   2	To view different installation details, specify warn, debug, or error instead of info.

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Example output

   ...
   INFO Install complete!
   INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
   INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
   INFO Login to the console with user: "kubeadmin", and password: "4vYBz-Ee6gm-ymBZj-Wt5AL"
   INFO Time elapsed: 36m22s

   The cluster access and credential information also outputs to <installation_directory>/.openshift_install.log when an installation succeeds.

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information. It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Verifying cluster status

You can verify your OKD cluster’s status during or after installation.

Procedure

1. In the cluster environment, export the administrator’s kubeconfig file:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)

   1	For <installation_directory>, specify the path to the directory that you stored the installation files in.

   The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server.

2. View the control plane and compute machines created after a deployment:

   $ oc get nodes

3. View your cluster’s version:

   $ oc get clusterversion

4. View your Operators’ status:

   $ oc get clusteroperator

5. View all running pods in the cluster:

   $ oc get pods -A

Logging in to the cluster by using the CLI

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OKD installation.

Prerequisites

• You deployed an OKD cluster.

• You installed the oc CLI.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)

   1	For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami

   Example output

   system:admin

The cluster is operational. Before you can add OVS-DPDK compute machines though, you must perform additional tasks.

Enabling the RHOSP metadata service as a mountable drive

You can apply a machine config to your machine pool that makes the Red Hat OpenStack Platform (RHOSP) metadata service available as a mountable drive.

The following machine config enables the display of RHOSP network UUIDs from within the SR-IOV Network Operator. This configuration simplifies the association of SR-IOV resources to cluster SR-IOV resources.

Procedure

1. Create a machine config file from the following template:

   A mountable metadata service machine config file

   kind: MachineConfig
   apiVersion: machineconfiguration.openshift.io/v1
   metadata:
     name: 20-mount-config (1)
     labels:
       machineconfiguration.openshift.io/role: worker
   spec:
     config:
       ignition:
         version: 3.2.0
       systemd:
         units:
           - name: create-mountpoint-var-config.service
             enabled: true
             contents: |
               [Unit]
               Description=Create mountpoint /var/config
               Before=kubelet.service
               [Service]
               ExecStart=/bin/mkdir -p /var/config
               [Install]
               WantedBy=var-config.mount
           - name: var-config.mount
             enabled: true
             contents: |
               [Unit]
               Before=local-fs.target
               [Mount]
               Where=/var/config
               What=/dev/disk/by-label/config-2
               [Install]
               WantedBy=local-fs.target

   1	You can substitute a name of your choice.

2. From a command line, apply the machine config:

   $ oc apply -f <machine_config_file_name>.yaml

Enabling the No-IOMMU feature for the RHOSP VFIO driver

You can apply a machine config to your machine pool that enables the No-IOMMU feature for the Red Hat OpenStack Platform (RHOSP) virtual function I/O (VFIO) driver. The RHOSP vfio-pci driver requires this feature.

Procedure

1. Create a machine config file from the following template:

   A No-IOMMU VFIO machine config file

   kind: MachineConfig
   apiVersion: machineconfiguration.openshift.io/v1
   metadata:
     name: 99-vfio-noiommu (1)
     labels:
       machineconfiguration.openshift.io/role: worker
   spec:
     config:
       ignition:
         version: 3.2.0
       storage:
         files:
         - path: /etc/modprobe.d/vfio-noiommu.conf
           mode: 0644
           contents:
             source: data:;base64,b3B0aW9ucyB2ZmlvIGVuYWJsZV91bnNhZmVfbm9pb21tdV9tb2RlPTEK

   1	You can substitute a name of your choice.

2. From a command line, apply the machine config:

   $ oc apply -f <machine_config_file_name>.yaml

Binding the vfio-pci kernel driver to NICs

Compute machines that connect to a virtual function I/O (VFIO) network require the vfio-pci kernel driver to be bound to the ports that are attached to a configured network. Create a machine set for workers that attach to this VFIO network.

Procedure

1. From a command line, retrieve VFIO network UUIDs:

   $ openstack network show <VFIO_network_name> -f value -c id

2. Create a machine set on your cluster from the following template:

   Details

   apiVersion: machineconfiguration.openshift.io/v1
   kind: MachineConfig
   metadata:
     labels:
       machineconfiguration.openshift.io/role: worker
     name: 99-vhostuser-bind
   spec:
     config:
       ignition:
         version: 2.2.0
       systemd:
         units:
         - name: vhostuser-bind.service
           enabled: true
           contents: |
             [Unit]
             Description=Vhostuser Interface vfio-pci Bind
             Wants=network-online.target
             After=network-online.target ignition-firstboot-complete.service
             [Service]
             Type=oneshot
             EnvironmentFile=/etc/vhostuser-bind.conf
             ExecStart=/usr/local/bin/vhostuser $ARG
             [Install]
             WantedBy=multi-user.target
       storage:
         files:
         - contents:
             inline: vfio-pci
           filesystem: root
           mode: 0644
           path: /etc/modules-load.d/vfio-pci.conf
         - contents:
             inline: |
               #!/bin/bash
               set -e
               if [[ "$#" -lt 1 ]]; then
                   echo "Nework ID not provided, nothing to do"
                   exit
               fi
               source /etc/vhostuser-bind.conf
               NW_DATA="/var/config/openstack/latest/network_data.json"
               if [ ! -f ${NW_DATA} ]; then
                   echo "Network data file not found, trying to download it from nova metadata"
                   if ! curl http://169.254.169.254/openstack/latest/network_data.json > /tmp/network_data.json; then
                       echo "Failed to download network data file"
                       exit 1
                   fi
                   NW_DATA="/tmp/network_data.json"
               fi
               function parseNetwork() {
                   local nwid=$1
                   local pcis=()
                   echo "Network ID is $nwid"
                   links=$(jq '.networks[] | select(.network_id == "'$nwid'") | .link' $NW_DATA)
                   if [ ${#links} -gt 0 ]; then
                       for link in $links; do
                           echo "Link Name: $link"
                           mac=$(jq -r '.links[] | select(.id == '$link') | .ethernet_mac_address'  $NW_DATA)
                           if [ -n $mac ]; then
                               pci=$(bindDriver $mac)
                               pci_ret=$?
                               if [[ "$pci_ret" -eq 0 ]]; then
                                   echo "$pci bind succesful"
                               fi
                           fi
                       done
                   fi
               }
               function bindDriver() {
                   local mac=$1
                   for file in /sys/class/net/*; do
                       dev_mac=$(cat $file/address)
                       if [[ "$mac" == "$dev_mac" ]]; then
                           name=${file##*\/}
                           bus_str=$(ethtool -i $name | grep bus)
                           dev_t=${bus_str#*:}
                           dev=${dev_t#[[:space:]]}
                           echo $dev
                           devlink="/sys/bus/pci/devices/$dev"
                           syspath=$(realpath "$devlink")
                           if [ ! -f "$syspath/driver/unbind" ]; then
                               echo "File $syspath/driver/unbind not found"
                               return 1
                           fi
                           if ! echo "$dev">"$syspath/driver/unbind"; then
                               return 1
                           fi
                           if [ ! -f "$syspath/driver_override" ]; then
                               echo "File $syspath/driver_override not found"
                               return 1
                           fi
                           if ! echo "vfio-pci">"$syspath/driver_override"; then
                               return 1
                           fi
                           if [ ! -f "/sys/bus/pci/drivers/vfio-pci/bind" ]; then
                               echo "File /sys/bus/pci/drivers/vfio-pci/bind not found"
                               return 1
                           fi
                           if ! echo "$dev">"/sys/bus/pci/drivers/vfio-pci/bind"; then
                             return 1
                           fi
                           return 0
                       fi
                   done
                   return 1
               }
               for nwid in "$@"; do
                   parseNetwork $nwid
               done
           filesystem: root
           mode: 0744
           path: /usr/local/bin/vhostuser
         - contents:
             inline: |
               ARG="be22563c-041e-44a0-9cbd-aa391b439a39,ec200105-fb85-4181-a6af-35816da6baf7" (1)
           filesystem: root
           mode: 0644
           path: /etc/vhostuser-bind.conf

   1	Replace this value with a comma-separated list of VFIO network UUIDs.

   On boot for machines that are part of this set, the MAC addresses of ports are translated into PCI bus IDs. The vfio-pci module is bound to any port that is assocated with a network that is identified by the RHOSP network ID.

Verification

1. On a compute node, from a command line, retrieve the name of the node by entering:

   $ oc get nodes

2. Create a shell to debug the node:

   $ oc debug node/<node_name>

3. Change the root directory for the current running process:

   $ chroot /host

4. Enter the following command to list the kernel drivers that are handling each device on your machine:

   $ lspci -k

   Example output

   00:07.0 Ethernet controller: Red Hat, Inc. Virtio network device
   Subsystem: Red Hat, Inc. Device 0001
   Kernel driver in use: vfio-pci

   In the output of the command, VFIO ethernet controllers use the vfio-pci kernel driver.

Exposing the host-device interface to the pod

You can use the Container Network Interface (CNI) plug-in to expose an interface that is on the host to the pod. The plug-in moves the interface from the namespace of the host network to the namespace of the pod. The pod then has direct control of the interface.

Procedure

• Create an additional network attachment with the host-device CNI plug-in by using the following object as an example:

      apiVersion: k8s.cni.cncf.io/v1
      kind: NetworkAttachmentDefinition
      metadata:
       name: vhostuser1
       namespace: default
      spec:
       config: '{ "cniVersion": "0.3.1", "name": "hostonly", "type": "host-device", "pciBusId": "0000:00:04.0", "ipam": { } }'

Verification

• From a command line, run the following command to see if networks are created in the namespace:

  $ oc -n <your_cnf_namespace> get net-attach-def

Additional resources

• Creating an additional network attachment with the Cluster Network Operator

The cluster is installed and prepared for configuration. You must now perform the OVS-DPDK configuration tasks in Next steps.

Additional resources

• See About remote health monitoring for more information about the Telemetry service

Additional resources

• See Performance Addon Operator for low latency nodes for information about configuring your deployment for real-time running and low latency.

Next steps

• To complete OVS-DPDK configuration for your cluster:

  • Install the Performance Addon Operator.

  • Configure the Performance Addon Operator with huge pages support.

• Customize your cluster.

• If necessary, you can opt out of remote health reporting.

• If you need to enable external access to node ports, configure ingress cluster traffic by using a node port.

• If you did not configure RHOSP to accept application traffic over floating IP addresses, configure RHOSP access with floating IP addresses.