Screen Layout

This is the first screen will be displayed when you get in the Neuron. In the upper part, there is a menu selection bar that contains 3 kind of features. First is Status menu which contains the data, event, alarm monitoring features. Second menu is configuration which is used to setup the PLC or device communication details. Last is administration menu. At the top right hand corner, there are three command button which are used to control the Neuron system. The lower part is the status bar that show the current status of Neuron.

Screen Layout - 图1

Selection Menu

Status Menu Screen Layout - 图2

Configuration Menu Screen Layout - 图3

Administration Menu Screen Layout - 图4

Command Button

There are 3 command buttons at the top right corner to control the Neuron.

Stop/Start This is start/stop button that can temporarily pause the Neuron. When Neuron is paused. The system status will turn into standby mode and no telemetry data will be sent out.
Restart This button is used to restart the Neuron system.
Send This button is for sending the configuration data to Neuron system after finished the setup configuration data

Screen Layout - 图5

Screen Layout - 图6

Status Bar

There are five kinds of system status in Neuron.

Status Description
COMM UP
COMM DOWN		 device communication up
device communication down
MANU
AUTO
SERV		 machine in manual mode
machine in auto mode
machine in service mode
ACTIVE
INACTIVE
STANDBY
SEMI		 Neuron system in active mode
Neuron system in inactive mode
Neuron system in standby mode
Neuron system in semi-active mode
MQCONNECT
MQDISCONNECT		 MQ broker connected
MQ broker disconnected
NO ALARM
ALARM
UNACK ALARM		 No alarm found
Alarms
Unacknowlegde alarms