Guards

A guard is a class annotated with the @Injectable() decorator. Guards should implement the CanActivate interface.

Guards have a single responsibility. They determine whether a given request will be handled by the route handler or not, depending on certain conditions (like permissions, roles, ACLs, etc.) present at run-time. This is often referred to as authorization. Authorization (and its cousin, authentication, with which it usually collaborates) has typically been handled by middleware in traditional Express applications. Middleware is a fine choice for authentication, since things like token validation and attaching properties to the request object are not strongly connected with a particular route context (and its metadata).

But middleware, by its nature, is dumb. It doesn’t know which handler will be executed after calling the next() function. On the other hand, Guards have access to the ExecutionContext instance, and thus know exactly what’s going to be executed next. They’re designed, much like exception filters, pipes, and interceptors, to let you interpose processing logic at exactly the right point in the request/response cycle, and to do so declaratively. This helps keep your code DRY and declarative.

Hint Guards are executed after each middleware, but before any interceptor or pipe.

Authorization guard

As mentioned, authorization is a great use case for Guards because specific routes should be available only when the caller (usually a specific authenticated user) has sufficient permissions. The AuthGuard that we’ll build now assumes an authenticated user (and that, therefore, a token is attached to the request headers). It will extract and validate the token, and use the extracted information to determine whether the request can proceed or not.

auth.guard.ts

import { Injectable, CanActivate, ExecutionContext } from '@nestjs/common';
import { Observable } from 'rxjs';
@Injectable()
export class AuthGuard implements CanActivate {
  canActivate(
    context: ExecutionContext,
  ): boolean | Promise<boolean> | Observable<boolean> {
    const request = context.switchToHttp().getRequest();
    return validateRequest(request);
  }
}

import { Injectable } from '@nestjs/common';
@Injectable()
export class AuthGuard {
  async canActivate(context) {
    const request = context.switchToHttp().getRequest();
    return validateRequest(request);
  }
}

The logic inside the validateRequest() function can be as simple or sophisticated as needed. The main point of this example is to show how guards fit into the request/response cycle.

Every guard must implement a canActivate() function. This function should return a boolean, indicating whether the current request is allowed or not. It can return the response either synchronously or asynchronously (via a Promise or Observable). Nest uses the return value to control the next action:

• if it returns true, the request will be processed.
• if it returns false, Nest will deny the request.

Official enterprise support

• Providing technical guidance
• Performing in-depth code reviews
• Mentoring team members
• Advising best practices

Explore more

Execution context

The canActivate() function takes a single argument, the ExecutionContext instance. The ExecutionContext inherits from ArgumentsHost. We saw ArgumentsHost previously in the exception filters chapter. In the sample above, we are just using the same helper methods defined on ArgumentsHost that we used earlier, to get a reference to the Request object. You can refer back to the Arguments host section of the exception filters chapter for more on this topic.

By extending ArgumentsHost, ExecutionContext also adds several new helper methods that provide additional details about the current execution process. These details can be helpful in building more generic guards that can work across a broad set of controllers, methods, and execution contexts. Learn more about ExecutionContexthere.

Role-based authentication

Let’s build a more functional guard that permits access only to users with a specific role. We’ll start with a basic guard template, and build on it in the coming sections. For now, it allows all requests to proceed:

roles.guard.ts

import { Injectable, CanActivate, ExecutionContext } from '@nestjs/common';
import { Observable } from 'rxjs';
@Injectable()
export class RolesGuard implements CanActivate {
  canActivate(
    context: ExecutionContext,
  ): boolean | Promise<boolean> | Observable<boolean> {
    return true;
  }
}

import { Injectable } from '@nestjs/common';
@Injectable()
export class RolesGuard {
  canActivate(context) {
    return true;
  }
}

Binding guards

Like pipes and exception filters, guards can be controller-scoped, method-scoped, or global-scoped. Below, we set up a controller-scoped guard using the @UseGuards() decorator. This decorator may take a single argument, or a comma-separated list of arguments. This lets you easily apply the appropriate set of guards with one declaration.

@Controller('cats')
@UseGuards(RolesGuard)
export class CatsController {}

Hint The @UseGuards() decorator is imported from the @nestjs/common package.

Above, we passed the RolesGuard type (instead of an instance), leaving responsibility for instantiation to the framework and enabling dependency injection. As with pipes and exception filters, we can also pass an in-place instance:

@Controller('cats')
@UseGuards(new RolesGuard())
export class CatsController {}

The construction above attaches the guard to every handler declared by this controller. If we wish the guard to apply only to a single method, we apply the @UseGuards() decorator at the method level.

In order to set up a global guard, use the useGlobalGuards() method of the Nest application instance:

const app = await NestFactory.create(AppModule);
app.useGlobalGuards(new RolesGuard());

Notice In the case of hybrid apps the useGlobalGuards() method doesn’t set up guards for gateways and micro services. For “standard” (non-hybrid) microservice apps, useGlobalGuards() does mount the guards globally.

Global guards are used across the whole application, for every controller and every route handler. In terms of dependency injection, global guards registered from outside of any module (with useGlobalGuards() as in the example above) cannot inject dependencies since this is done outside the context of any module. In order to solve this issue, you can set up a guard directly from any module using the following construction:

app.module.ts

import { Module } from '@nestjs/common';
import { APP_GUARD } from '@nestjs/core';
@Module({
  providers: [
    {
      provide: APP_GUARD,
      useClass: RolesGuard,
    },
  ],
})
export class AppModule {}

Hint When using this approach to perform dependency injection for the guard, note that regardless of the module where this construction is employed, the guard is, in fact, global. Where should this be done? Choose the module where the guard (RolesGuard in the example above) is defined. Also, useClass is not the only way of dealing with custom provider registration. Learn more here.

Setting roles per handler

Our RolesGuard is working, but it’s not very smart yet. We’re not yet taking advantage of the most important guard feature - the execution context. It doesn’t yet know about roles, or which roles are allowed for each handler. The CatsController, for example, could have different permission schemes for different routes. Some might be available only for an admin user, and others could be open for everyone. How can we match roles to routes in a flexible and reusable way?

This is where custom metadata comes into play (learn more here). Nest provides the ability to attach custom metadata to route handlers through the @SetMetadata() decorator. This metadata supplies our missing role data, which a smart guard needs to make decisions. Let’s take a look at using @SetMetadata():

cats.controller.ts

@Post()
@SetMetadata('roles', ['admin'])
async create(@Body() createCatDto: CreateCatDto) {
  this.catsService.create(createCatDto);
}

@Post()
@SetMetadata('roles', ['admin'])
@Bind(Body())
async create(createCatDto) {
  this.catsService.create(createCatDto);
}

Hint The @SetMetadata() decorator is imported from the @nestjs/common package.

With the construction above, we attached the roles metadata (roles is a key, while ['admin'] is a particular value) to the create() method. While this works, it’s not good practice to use @SetMetadata() directly in your routes. Instead, create your own decorators, as shown below:

roles.decorator.ts

import { SetMetadata } from '@nestjs/common';
export const Roles = (...roles: string[]) => SetMetadata('roles', roles);

import { SetMetadata } from '@nestjs/common';
export const Roles = (...roles) => SetMetadata('roles', roles);

This approach is much cleaner and more readable, and is strongly typed. Now that we have a custom @Roles() decorator, we can use it to decorate the create() method.

cats.controller.ts

@Post()
@Roles('admin')
async create(@Body() createCatDto: CreateCatDto) {
  this.catsService.create(createCatDto);
}

@Post()
@Roles('admin')
@Bind(Body())
async create(createCatDto) {
  this.catsService.create(createCatDto);
}

Putting it all together

Let’s now go back and tie this together with our RolesGuard. Currently, it simply returns true in all cases, allowing every request to proceed. We want to make the return value conditional based on the comparing the roles assigned to the current user to the actual roles required by the current route being processed. In order to access the route’s role(s) (custom metadata), we’ll use the Reflector helper class, which is provided out of the box by the framework and exposed from the @nestjs/core package.

roles.guard.ts

import { Injectable, CanActivate, ExecutionContext } from '@nestjs/common';
import { Reflector } from '@nestjs/core';
@Injectable()
export class RolesGuard implements CanActivate {
  constructor(private reflector: Reflector) {}
  canActivate(context: ExecutionContext): boolean {
    const roles = this.reflector.get<string[]>('roles', context.getHandler());
    if (!roles) {
      return true;
    }
    const request = context.switchToHttp().getRequest();
    const user = request.user;
    return matchRoles(roles, user.roles);
  }
}

import { Injectable, Dependencies } from '@nestjs/common';
import { Reflector } from '@nestjs/core';
@Injectable()
@Dependencies(Reflector)
export class RolesGuard {
  constructor(reflector) {
    this.reflector = reflector;
  }
  canActivate(context) {
    const roles = this.reflector.get('roles', context.getHandler());
    if (!roles) {
      return true;
    }
    const request = context.switchToHttp().getRequest();
    const user = request.user;
    return matchRoles(roles, user.roles);
  }
}

Hint In the node.js world, it’s common practice to attach the authorized user to the request object. Thus, in our sample code above, we are assuming that request.user contains the user instance and allowed roles. In your app, you will probably make that association in your custom authentication guard (or middleware).

Warning The logic inside the matchRoles() function can be as simple or sophisticated as needed. The main point of this example is to show how guards fit into the request/response cycle.

Refer to the Reflection and metadata section of the Execution context chapter for more details on utilizing Reflector in a context-sensitive way.

When a user with insufficient privileges requests an endpoint, Nest automatically returns the following response:

{
  "statusCode": 403,
  "message": "Forbidden resource",
  "error": "Forbidden"
}

Note that behind the scenes, when a guard returns false, the framework throws a ForbiddenException. If you want to return a different error response, you should throw your own specific exception. For example:

throw new UnauthorizedException();

Any exception thrown by a guard will be handled by the exceptions layer (global exceptions filter and any exceptions filters that are applied to the current context).