Injecting Faults

It is easy to inject failures into applications by using the Traffic Split API of the Service Mesh Interface. TrafficSplit allows you to redirect a percentage of traffic to a specific backend. This backend is completely flexible and can return whatever responses you want - 500s, timeouts or even crazy payloads.

The books demo is a great way to show off this behavior. The overall topology looks like:

Topology

Topology

In this guide, you will split some of the requests from webapp to books. Most requests will end up at the correct books destination, however some of them will be redirected to a faulty backend. This backend will return 500s for every request and inject faults into the webapp service. No code changes are required and as this method is configuration driven, it is a process that can be added to integration tests and CI pipelines. If you are really living the chaos engineering lifestyle, fault injection could even be used in production.

Prerequisites

To use this guide, you’ll need to have Linkerd installed on your cluster, along with its Viz extension. Follow the Installing Linkerd Guide if you haven’t already done this.

Setup the service

First, add the books sample application to your cluster:

  1. kubectl create ns booksapp && \
  2.   linkerd inject https://run.linkerd.io/booksapp.yml | \
  3.   kubectl -n booksapp apply -f -

As this manifest is used as a demo elsewhere, it has been configured with an error rate. To show how fault injection works, the error rate needs to be removed so that there is a reliable baseline. To increase success rate for booksapp to 100%, run:

  1. kubectl -n booksapp patch deploy authors \
  2.   --type='json' \
  3.   -p='[{"op":"remove", "path":"/spec/template/spec/containers/0/env/2"}]'

After a little while, the stats will show 100% success rate. You can verify this by running:

  1. linkerd viz -n booksapp stat deploy

The output will end up looking at little like:

  1. NAME      MESHED   SUCCESS      RPS   LATENCY_P50   LATENCY_P95   LATENCY_P99   TCP_CONN
  2. authors      1/1   100.00%   7.1rps           4ms          26ms          33ms          6
  3. books        1/1   100.00%   8.6rps           6ms          73ms          95ms          6
  4. traffic      1/1         -        -             -             -             -          -
  5. webapp       3/3   100.00%   7.9rps          20ms          76ms          95ms          9

Create the faulty backend

Injecting faults into booksapp requires a service that is configured to return errors. To do this, you can start NGINX and configure it to return 500s by running:

  1. cat <<EOF | linkerd inject - | kubectl apply -f -
  2. apiVersion: v1
  3. kind: ConfigMap
  4. metadata:
  5.   name: error-injector
  6.   namespace: booksapp
  7. data:
  8.  nginx.conf: |-
  9.     events {}
  10.     http {
  11.         server {
  12.           listen 8080;
  13.             location / {
  14.                 return 500;
  15.             }
  16.         }
  17.     }
  18. ---
  19. apiVersion: apps/v1
  20. kind: Deployment
  21. metadata:
  22.   name: error-injector
  23.   namespace: booksapp
  24.   labels:
  25.     app: error-injector
  26. spec:
  27.   selector:
  28.     matchLabels:
  29.       app: error-injector
  30.   replicas: 1
  31.   template:
  32.     metadata:
  33.       labels:
  34.         app: error-injector
  35.     spec:
  36.       containers:
  37.         - name: nginx
  38.           image: nginx:alpine
  39.           volumeMounts:
  40.             - name: nginx-config
  41.               mountPath: /etc/nginx/nginx.conf
  42.               subPath: nginx.conf
  43.       volumes:
  44.         - name: nginx-config
  45.           configMap:
  46.             name: error-injector
  47. ---
  48. apiVersion: v1
  49. kind: Service
  50. metadata:
  51.   name: error-injector
  52.   namespace: booksapp
  53. spec:
  54.   ports:
  55.   - name: service
  56.     port: 8080
  57.   selector:
  58.     app: error-injector
  59. EOF

Inject faults

With booksapp and NGINX running, it is now time to partially split the traffic between an existing backend, books, and the newly created error-injector. This is done by adding a TrafficSplit configuration to your cluster:

  1. cat <<EOF | kubectl apply -f -
  2. apiVersion: split.smi-spec.io/v1alpha1
  3. kind: TrafficSplit
  4. metadata:
  5.   name: error-split
  6.   namespace: booksapp
  7. spec:
  8.   service: books
  9.   backends:
  10.   - service: books
  11.     weight: 900m
  12.   - service: error-injector
  13.     weight: 100m
  14. EOF

When Linkerd sees traffic going to the books service, it will send 9⁄10 requests to the original service and 1⁄10 to the error injector. You can see what this looks like by running stat and filtering explicitly to just the requests from webapp:

  1. linkerd viz -n booksapp routes deploy/webapp --to service/books

Unlike the previous stat command which only looks at the requests received by servers, this routes command filters to all the requests being issued by webapp destined for the books service itself. The output should show a 90% success rate:

  1. ROUTE       SERVICE   SUCCESS      RPS   LATENCY_P50   LATENCY_P95   LATENCY_P99
  2. [DEFAULT]     books    90.08%   2.0rps           5ms          69ms          94ms

Note

In this instance, you are looking at the service instead of the deployment. If you were to run this command and look at deploy/books, the success rate would still be 100%. The reason for this is that error-injector is a completely separate deployment and traffic is being shifted at the service level. The requests never reach the books pods and are instead rerouted to the error injector’s pods.

Cleanup

To remove everything in this guide from your cluster, run:

  1. kubectl delete ns booksapp