Configure a Pod to Use a PersistentVolume for Storage

This page shows you how to configure a Pod to use a PersistentVolumeClaim for storage. Here is a summary of the process:

  1. You, as cluster administrator, create a PersistentVolume backed by physical storage. You do not associate the volume with any Pod.

  2. You, now taking the role of a developer / cluster user, create a PersistentVolumeClaim that is automatically bound to a suitable PersistentVolume.

  3. You create a Pod that uses the above PersistentVolumeClaim for storage.

Before you begin

  • You need to have a Kubernetes cluster that has only one Node, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a single-node cluster, you can create one by using Minikube.

  • Familiarize yourself with the material in Persistent Volumes.

Create an index.html file on your Node

Open a shell to the single Node in your cluster. How you open a shell depends on how you set up your cluster. For example, if you are using Minikube, you can open a shell to your Node by entering minikube ssh.

In your shell on that Node, create a /mnt/data directory:

  1. # This assumes that your Node uses "sudo" to run commands
  2. # as the superuser
  3. sudo mkdir /mnt/data

In the /mnt/data directory, create an index.html file:

  1. # This again assumes that your Node uses "sudo" to run commands
  2. # as the superuser
  3. sudo sh -c "echo 'Hello from Kubernetes storage' > /mnt/data/index.html"

Note: If your Node uses a tool for superuser access other than sudo, you can usually make this work if you replace sudo with the name of the other tool.

Test that the index.html file exists:

  1. cat /mnt/data/index.html

The output should be:

  1. Hello from Kubernetes storage

You can now close the shell to your Node.

Create a PersistentVolume

In this exercise, you create a hostPath PersistentVolume. Kubernetes supports hostPath for development and testing on a single-node cluster. A hostPath PersistentVolume uses a file or directory on the Node to emulate network-attached storage.

In a production cluster, you would not use hostPath. Instead a cluster administrator would provision a network resource like a Google Compute Engine persistent disk, an NFS share, or an Amazon Elastic Block Store volume. Cluster administrators can also use StorageClasses to set up dynamic provisioning.

Here is the configuration file for the hostPath PersistentVolume:

pods/storage/pv-volume.yaml Configure a Pod to Use a PersistentVolume for Storage - 图1

  1. apiVersion: v1
  2. kind: PersistentVolume
  3. metadata:
  4.   name: task-pv-volume
  5.   labels:
  6.     type: local
  7. spec:
  8.   storageClassName: manual
  9.   capacity:
  10.     storage: 10Gi
  11.   accessModes:
  12.     - ReadWriteOnce
  13.   hostPath:
  14.     path: "/mnt/data"

The configuration file specifies that the volume is at /mnt/data on the cluster’s Node. The configuration also specifies a size of 10 gibibytes and an access mode of ReadWriteOnce, which means the volume can be mounted as read-write by a single Node. It defines the StorageClass name manual for the PersistentVolume, which will be used to bind PersistentVolumeClaim requests to this PersistentVolume.

Create the PersistentVolume:

  1. kubectl apply -f https://k8s.io/examples/pods/storage/pv-volume.yaml

View information about the PersistentVolume:

  1. kubectl get pv task-pv-volume

The output shows that the PersistentVolume has a STATUS of Available. This means it has not yet been bound to a PersistentVolumeClaim.

  1. NAME             CAPACITY   ACCESSMODES   RECLAIMPOLICY   STATUS      CLAIM     STORAGECLASS   REASON    AGE
  2. task-pv-volume   10Gi       RWO           Retain          Available             manual                   4s

Create a PersistentVolumeClaim

The next step is to create a PersistentVolumeClaim. Pods use PersistentVolumeClaims to request physical storage. In this exercise, you create a PersistentVolumeClaim that requests a volume of at least three gibibytes that can provide read-write access for at least one Node.

Here is the configuration file for the PersistentVolumeClaim:

pods/storage/pv-claim.yaml Configure a Pod to Use a PersistentVolume for Storage - 图2

  1. apiVersion: v1
  2. kind: PersistentVolumeClaim
  3. metadata:
  4.   name: task-pv-claim
  5. spec:
  6.   storageClassName: manual
  7.   accessModes:
  8.     - ReadWriteOnce
  9.   resources:
  10.     requests:
  11.       storage: 3Gi

Create the PersistentVolumeClaim:

  1. kubectl apply -f https://k8s.io/examples/pods/storage/pv-claim.yaml

After you create the PersistentVolumeClaim, the Kubernetes control plane looks for a PersistentVolume that satisfies the claim’s requirements. If the control plane finds a suitable PersistentVolume with the same StorageClass, it binds the claim to the volume.

Look again at the PersistentVolume:

  1. kubectl get pv task-pv-volume

Now the output shows a STATUS of Bound.

  1. NAME             CAPACITY   ACCESSMODES   RECLAIMPOLICY   STATUS    CLAIM                   STORAGECLASS   REASON    AGE
  2. task-pv-volume   10Gi       RWO           Retain          Bound     default/task-pv-claim   manual                   2m

Look at the PersistentVolumeClaim:

  1. kubectl get pvc task-pv-claim

The output shows that the PersistentVolumeClaim is bound to your PersistentVolume, task-pv-volume.

  1. NAME            STATUS    VOLUME           CAPACITY   ACCESSMODES   STORAGECLASS   AGE
  2. task-pv-claim   Bound     task-pv-volume   10Gi       RWO           manual         30s

Create a Pod

The next step is to create a Pod that uses your PersistentVolumeClaim as a volume.

Here is the configuration file for the Pod:

pods/storage/pv-pod.yaml Configure a Pod to Use a PersistentVolume for Storage - 图3

  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4.   name: task-pv-pod
  5. spec:
  6.   volumes:
  7.     - name: task-pv-storage
  8.       persistentVolumeClaim:
  9.         claimName: task-pv-claim
  10.   containers:
  11.     - name: task-pv-container
  12.       image: nginx
  13.       ports:
  14.         - containerPort: 80
  15.           name: "http-server"
  16.       volumeMounts:
  17.         - mountPath: "/usr/share/nginx/html"
  18.           name: task-pv-storage

Notice that the Pod’s configuration file specifies a PersistentVolumeClaim, but it does not specify a PersistentVolume. From the Pod’s point of view, the claim is a volume.

Create the Pod:

  1. kubectl apply -f https://k8s.io/examples/pods/storage/pv-pod.yaml

Verify that the container in the Pod is running;

  1. kubectl get pod task-pv-pod

Get a shell to the container running in your Pod:

  1. kubectl exec -it task-pv-pod -- /bin/bash

In your shell, verify that nginx is serving the index.html file from the hostPath volume:

  1. # Be sure to run these 3 commands inside the root shell that comes from
  2. # running "kubectl exec" in the previous step
  3. apt update
  4. apt install curl
  5. curl http://localhost/

The output shows the text that you wrote to the index.html file on the hostPath volume:

  1. Hello from Kubernetes storage

If you see that message, you have successfully configured a Pod to use storage from a PersistentVolumeClaim.

Clean up

Delete the Pod, the PersistentVolumeClaim and the PersistentVolume:

  1. kubectl delete pod task-pv-pod
  2. kubectl delete pvc task-pv-claim
  3. kubectl delete pv task-pv-volume

If you don’t already have a shell open to the Node in your cluster, open a new shell the same way that you did earlier.

In the shell on your Node, remove the file and directory that you created:

  1. # This assumes that your Node uses "sudo" to run commands
  2. # as the superuser
  3. sudo rm /mnt/data/index.html
  4. sudo rmdir /mnt/data

You can now close the shell to your Node.

Mounting the same persistentVolume in two places

pods/storage/pv-duplicate.yaml Configure a Pod to Use a PersistentVolume for Storage - 图4

  2. apiVersion: v1
  3. kind: Pod
  4. metadata:
  5.   name: test
  6. spec:
  7.   containers:
  8.     - name: test
  9.       image: nginx
  10.       volumeMounts:
  11.         # a mount for site-data
  12.         - name: config
  13.           mountPath: /usr/share/nginx/html
  14.           subPath: html
  15.         # another mount for nginx config
  16.         - name: config
  17.           mountPath: /etc/nginx/nginx.conf
  18.           subPath: nginx.conf
  19.   volumes:
  20.     - name: config
  21.       persistentVolumeClaim:
  22.         claimName: test-nfs-claim

You can perform 2 volume mounts on your nginx container:

  • /usr/share/nginx/html for the static website
  • /etc/nginx/nginx.conf for the default config

Access control

Storage configured with a group ID (GID) allows writing only by Pods using the same GID. Mismatched or missing GIDs cause permission denied errors. To reduce the need for coordination with users, an administrator can annotate a PersistentVolume with a GID. Then the GID is automatically added to any Pod that uses the PersistentVolume.

Use the pv.beta.kubernetes.io/gid annotation as follows:

  1. apiVersion: v1
  2. kind: PersistentVolume
  3. metadata:
  4.   name: pv1
  5.   annotations:
  6.     pv.beta.kubernetes.io/gid: "1234"

When a Pod consumes a PersistentVolume that has a GID annotation, the annotated GID is applied to all containers in the Pod in the same way that GIDs specified in the Pod’s security context are. Every GID, whether it originates from a PersistentVolume annotation or the Pod’s specification, is applied to the first process run in each container.

Note: When a Pod consumes a PersistentVolume, the GIDs associated with the PersistentVolume are not present on the Pod resource itself.

What’s next

Reference