Debugging DNS Resolution

This page provides hints on diagnosing DNS problems.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

• Katacoda
• Play with Kubernetes

Your cluster must be configured to use the CoreDNS addon or its precursor, kube-dns.

Your Kubernetes server must be at or later than version v1.6. To check the version, enter kubectl version.

Create a simple Pod to use as a test environment

admin/dns/dnsutils.yaml

apiVersion: v1
kind: Pod
metadata:
  name: dnsutils
  namespace: default
spec:
  containers:
  - name: dnsutils
    image: k8s.gcr.io/e2e-test-images/jessie-dnsutils:1.3
    command:
      - sleep
      - "3600"
    imagePullPolicy: IfNotPresent
  restartPolicy: Always

Note: This example creates a pod in the default namespace. DNS name resolution for services depends on the namespace of the pod. For more information, review DNS for Services and Pods.

Use that manifest to create a Pod:

kubectl apply -f https://k8s.io/examples/admin/dns/dnsutils.yaml

pod/dnsutils created

…and verify its status:

kubectl get pods dnsutils

NAME      READY     STATUS    RESTARTS   AGE
dnsutils   1/1       Running   0          <some-time>

Once that Pod is running, you can exec nslookup in that environment. If you see something like the following, DNS is working correctly.

kubectl exec -i -t dnsutils -- nslookup kubernetes.default

Server:    10.0.0.10
Address 1: 10.0.0.10
Name:      kubernetes.default
Address 1: 10.0.0.1

If the nslookup command fails, check the following:

Check the local DNS configuration first

Take a look inside the resolv.conf file. (See Customizing DNS Service and Known issues below for more information)

kubectl exec -ti dnsutils -- cat /etc/resolv.conf

Verify that the search path and name server are set up like the following (note that search path may vary for different cloud providers):

search default.svc.cluster.local svc.cluster.local cluster.local google.internal c.gce_project_id.internal
nameserver 10.0.0.10
options ndots:5

Errors such as the following indicate a problem with the CoreDNS (or kube-dns) add-on or with associated Services:

kubectl exec -i -t dnsutils -- nslookup kubernetes.default

Server:    10.0.0.10
Address 1: 10.0.0.10
nslookup: can't resolve 'kubernetes.default'

or

kubectl exec -i -t dnsutils -- nslookup kubernetes.default

Server:    10.0.0.10
Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local
nslookup: can't resolve 'kubernetes.default'

Check if the DNS pod is running

Use the kubectl get pods command to verify that the DNS pod is running.

kubectl get pods --namespace=kube-system -l k8s-app=kube-dns

NAME                       READY     STATUS    RESTARTS   AGE
...
coredns-7b96bf9f76-5hsxb   1/1       Running   0           1h
coredns-7b96bf9f76-mvmmt   1/1       Running   0           1h
...

Note: The value for label k8s-app is kube-dns for both CoreDNS and kube-dns deployments.

If you see that no CoreDNS Pod is running or that the Pod has failed/completed, the DNS add-on may not be deployed by default in your current environment and you will have to deploy it manually.

Check for errors in the DNS pod

Use the kubectl logs command to see logs for the DNS containers.

For CoreDNS:

kubectl logs --namespace=kube-system -l k8s-app=kube-dns

Here is an example of a healthy CoreDNS log:

.:53
2018/08/15 14:37:17 [INFO] CoreDNS-1.2.2
2018/08/15 14:37:17 [INFO] linux/amd64, go1.10.3, 2e322f6
CoreDNS-1.2.2
linux/amd64, go1.10.3, 2e322f6
2018/08/15 14:37:17 [INFO] plugin/reload: Running configuration MD5 = 24e6c59e83ce706f07bcc82c31b1ea1c

See if there are any suspicious or unexpected messages in the logs.

Is DNS service up?

Verify that the DNS service is up by using the kubectl get service command.

kubectl get svc --namespace=kube-system

NAME         TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)             AGE
...
kube-dns     ClusterIP   10.0.0.10      <none>        53/UDP,53/TCP        1h
...

Note: The service name is kube-dns for both CoreDNS and kube-dns deployments.

If you have created the Service or in the case it should be created by default but it does not appear, see debugging Services for more information.

Are DNS endpoints exposed?

You can verify that DNS endpoints are exposed by using the kubectl get endpoints command.

kubectl get endpoints kube-dns --namespace=kube-system

NAME       ENDPOINTS                       AGE
kube-dns   10.180.3.17:53,10.180.3.17:53    1h

If you do not see the endpoints, see the endpoints section in the debugging Services documentation.

For additional Kubernetes DNS examples, see the cluster-dns examples in the Kubernetes GitHub repository.

Are DNS queries being received/processed?

You can verify if queries are being received by CoreDNS by adding the log plugin to the CoreDNS configuration (aka Corefile). The CoreDNS Corefile is held in a ConfigMap named coredns. To edit it, use the command:

kubectl -n kube-system edit configmap coredns

Then add log in the Corefile section per the example below:

apiVersion: v1
kind: ConfigMap
metadata:
  name: coredns
  namespace: kube-system
data:
  Corefile: |
    .:53 {
        log
        errors
        health
        kubernetes cluster.local in-addr.arpa ip6.arpa {
          pods insecure
          upstream
          fallthrough in-addr.arpa ip6.arpa
        }
        prometheus :9153
        forward . /etc/resolv.conf
        cache 30
        loop
        reload
        loadbalance
    }

After saving the changes, it may take up to minute or two for Kubernetes to propagate these changes to the CoreDNS pods.

Next, make some queries and view the logs per the sections above in this document. If CoreDNS pods are receiving the queries, you should see them in the logs.

Here is an example of a query in the log:

.:53
2018/08/15 14:37:15 [INFO] CoreDNS-1.2.0
2018/08/15 14:37:15 [INFO] linux/amd64, go1.10.3, 2e322f6
CoreDNS-1.2.0
linux/amd64, go1.10.3, 2e322f6
2018/09/07 15:29:04 [INFO] plugin/reload: Running configuration MD5 = 162475cdf272d8aa601e6fe67a6ad42f
2018/09/07 15:29:04 [INFO] Reloading complete
172.17.0.18:41675 - [07/Sep/2018:15:29:11 +0000] 59925 "A IN kubernetes.default.svc.cluster.local. udp 54 false 512" NOERROR qr,aa,rd,ra 106 0.000066649s

Are you in the right namespace for the service?

DNS queries that don’t specify a namespace are limited to the pod’s namespace.

If the namespace of the pod and service differ, the DNS query must include the namespace of the service.

This query is limited to the pod’s namespace:

kubectl exec -i -t dnsutils -- nslookup <service-name>

This query specifies the namespace:

kubectl exec -i -t dnsutils -- nslookup <service-name>.<namespace>

To learn more about name resolution, see DNS for Services and Pods.

Known issues

Some Linux distributions (e.g. Ubuntu) use a local DNS resolver by default (systemd-resolved). Systemd-resolved moves and replaces /etc/resolv.conf with a stub file that can cause a fatal forwarding loop when resolving names in upstream servers. This can be fixed manually by using kubelet’s --resolv-conf flag to point to the correct resolv.conf (With systemd-resolved, this is /run/systemd/resolve/resolv.conf). kubeadm automatically detects systemd-resolved, and adjusts the kubelet flags accordingly.

Kubernetes installs do not configure the nodes’ resolv.conf files to use the cluster DNS by default, because that process is inherently distribution-specific. This should probably be implemented eventually.

Linux’s libc (a.k.a. glibc) has a limit for the DNS nameserver records to 3 by default. What’s more, for the glibc versions which are older than glibc-2.17-222 (the new versions update see this issue), the allowed number of DNS search records has been limited to 6 (see this bug from 2005). Kubernetes needs to consume 1 nameserver record and 3 search records. This means that if a local installation already uses 3 nameservers or uses more than 3 searches while your glibc version is in the affected list, some of those settings will be lost. To work around the DNS nameserver records limit, the node can run dnsmasq, which will provide more nameserver entries. You can also use kubelet’s --resolv-conf flag. To fix the DNS search records limit, consider upgrading your linux distribution or upgrading to an unaffected version of glibc.

Note: With Expanded DNS Configuration, Kubernetes allows more DNS search records.

If you are using Alpine version 3.3 or earlier as your base image, DNS may not work properly due to a known issue with Alpine. Kubernetes issue 30215 details more information on this.

What’s next

• See Autoscaling the DNS Service in a Cluster.
• Read DNS for Services and Pods