Configuring HTTPS with TLS certificates

Learn how to configure secure HTTPS connections in Knative using TLS certificates (TLS replaces SSL). Configure secure HTTPS connections to enable your Knative services and routes to terminate external TLS connections. You can configure Knative to handle certificates that you manually specify, or you can enable Knative to automatically obtain and renew certificates.

You can use either Certbot or cert-manager to obtain certificates. Both tools support TLS certificates but if you want to enable Knative for automatic TLS certificate provisioning, you must install and configure the cert-manager tool:

  • Manually obtain and renew certificates: Both the Certbot and cert-manager tools can be used to manually obtain TLS certificates. In general, after you obtain a certificate, you must create a Kubernetes secret to use that certificate in your cluster. See the complete set of steps below for details about manually obtaining and configuring certificates.

  • Enable Knative to automatically obtain and renew TLS certificates: You can also use cert-manager to configure Knative to automatically obtain new TLS certificates and renew existing ones. If you want to enable Knative to automatically provision TLS certificates, instead see the Enabling automatic TLS certificate provisioning topic.

By default, the Let’s Encrypt Certificate Authority (CA) is used to demonstrate how to enable HTTPS connections, but you can configure Knative to use any certificate from a CA that supports the ACME protocol. However, you must use and configure your certificate issuer to use the DNS-01 challenge type.

Important: Certificates issued by Let’s Encrypt are valid for only 90 days. Therefore, if you choose to manually obtain and configure your certificates, you must ensure that you renew each certificate before it expires.

Before you begin

You must meet the following requirements to enable secure HTTPS connections:

Important: Istio only supports a single certificate per Kubernetes cluster. To serve multiple domains using your Knative cluster, you must ensure that your new or existing certificate is signed for each of the domains that you want to serve.

Obtaining a TLS certificate

If you already have a signed certificate for your domain, see Manually adding a TLS certificate for details about configuring your Knative cluster.

If you need a new TLS certificate, you can choose to use one of the following tools to obtain a certificate from Let’s Encrypt:

  • Setup Certbot to manually obtain Let’s Encrypt certificates
  • Setup cert-manager to either manually obtain a certificate, or to automatically provision certificates

This page covers details for both of the above options.

For details about using other CA’s, see the tool’s reference documentation:

Using Certbot to manually obtain Let’s Encrypt certificates

Use the following steps to install Certbot and the use the tool to manually obtain a TLS certificate from Let’s Encrypt.

  1. Install Certbot by following the certbot-auto wrapper script instructions.

  2. Run the following command to use Certbot to request a certificate using DNS challenge during authorization:

    1. ./certbot-auto certonly --manual --preferred-challenges dns -d '*.default.yourdomain.com'

    where -d specifies your domain. If you want to validate multiple domain’s, you can include multiple flags: -d MY.EXAMPLEDOMAIN.1 -d MY.EXAMPLEDOMAIN.2. For more information, see the Cerbot command-line reference.

    The Certbot tool walks you through the steps of validating that you own each domain that you specify by creating TXT records in those domains.

    Result: CertBot creates two files:

    • Certificate:fullchain.pem
    • Private key: privkey.pem

What’s next:

Add the certificate and private key to your Knative cluster by creating a Kubernetes secret.

Using cert-manager to obtain Let’s Encrypt certificates

You can install and use cert-manager to either manually obtain a certificate or to configure your Knative cluster for automatic certificate provisioning:

  • Manual certificates: Install cert-manager and then use the tool to manually obtain a certificate.

    To use cert-manager to manually obtain certificates:

    1. Install and configure cert-manager.

    2. Continue to the steps below about manually adding a TLS certificate by creating and using a Kubernetes secret.

  • Automatic certificates: Configure Knative to use cert-manager for automatically obtaining and renewing TLS certificate. The steps for installing and configuring cert-manager for this method are covered in full in the Enabling automatic TLS cert provisioning topic.

Manually adding a TLS certificate

If you have an existing certificate or have used one of the Certbot or cert-manager tool to manually obtain a new certificate, you can use the following steps to add that certificate to your Knative cluster.

For instructions about enabling Knative for automatic certificate provisioning, see Enabling automatic TLS cert provisioning. Otherwise, continue below for instructions about manually adding a certificate.

To manually add a TLS certificate to your Knative cluster, you create a Kubernetes secret and then configure the knative-ingress-gateway:

  1. Run the following command to create a Kubernetes secret to hold your TLS certificate, cert.pem, and the private key, cert.pk:

    1. kubectl create --namespace istio-system secret tls istio-ingressgateway-certs \
    2.   --key cert.pk \
    3.   --cert cert.pem

    where cert.pk and cert.pem are your certificate and private key files. Note that the istio-ingressgateway-certs secret name is required.

  2. Configure Knative to use the new secret that you created for HTTPS connections:

    1. Run the following command to open the Knative shared gateway in edit mode:

      1. kubectl edit gateway knative-ingress-gateway --namespace knative-serving

    2. Update the gateway to include the following tls: section and configuration:

      1. tls:
      2.   mode: SIMPLE
      3.   privateKey: /etc/istio/ingressgateway-certs/tls.key
      4.   serverCertificate: /etc/istio/ingressgateway-certs/tls.crt

      Example:

      1. # Please edit the object below. Lines beginning with a '#' will be ignored.
      2. # and an empty file will abort the edit. If an error occurs while saving this
      3. # file will be reopened with the relevant failures.
      4. apiVersion: networking.istio.io/v1alpha3
      5. kind: Gateway
      6. metadata:
      7.   # ... skipped ...
      8. spec:
      9.   selector:
      10.     istio: ingressgateway
      11.   servers:
      12.     - hosts:
      13.         - "*"
      14.       port:
      15.         name: http
      16.         number: 80
      17.         protocol: HTTP
      18.     - hosts:
      19.         - "*"
      20.       port:
      21.         name: https
      22.         number: 443
      23.         protocol: HTTPS
      24.       tls:
      25.         mode: SIMPLE
      26.         privateKey: /etc/istio/ingressgateway-certs/tls.key
      27.         serverCertificate: /etc/istio/ingressgateway-certs/tls.crt

What’s next:

After your changes are running on your Knative cluster, you can begin using the HTTPS protocol for secure access your deployed Knative services.