Sidecar

Sidecar

Sidecar describes the configuration of the sidecar proxy that mediates inbound and outbound communication to the workload instance it is attached to. By default, Istio will program all sidecar proxies in the mesh with the necessary configuration required to reach every workload instance in the mesh, as well as accept traffic on all the ports associated with the workload. The Sidecar configuration provides a way to fine tune the set of ports, protocols that the proxy will accept when forwarding traffic to and from the workload. In addition, it is possible to restrict the set of services that the proxy can reach when forwarding outbound traffic from workload instances.

Services and configuration in a mesh are organized into one or more namespaces (e.g., a Kubernetes namespace or a CF org/space). A Sidecar configuration in a namespace will apply to one or more workload instances in the same namespace, selected using the workloadSelector field. In the absence of a workloadSelector, it will apply to all workload instances in the same namespace. When determining the Sidecar configuration to be applied to a workload instance, preference will be given to the resource with a workloadSelector that selects this workload instance, over a Sidecar configuration without any workloadSelector.

NOTE 1: _Each namespace can have only one Sidecar configuration without any workloadSelector that specifies the default for all pods in that namespace_. It is recommended to use the name default for the namespace-wide sidecar. The behavior of the system is undefined if more than one selector-less Sidecar configurations exist in a given namespace. The behavior of the system is undefined if two or more Sidecar configurations with a workloadSelector select the same workload instance.

NOTE 2: A Sidecar configuration in the MeshConfig root namespace will be applied by default to all namespaces without a Sidecar configuration. This global default Sidecar configuration should not have any workloadSelector.

NOTE 3: A Sidecar is not applicable to gateways, even though gateways are istio-proxies.

The example below declares a global default Sidecar configuration in the root namespace called istio-config, that configures sidecars in all namespaces to allow egress traffic only to other workloads in the same namespace as well as to services in the istio-system namespace.

apiVersion: networking.istio.io/v1alpha3
kind: Sidecar
metadata:
  name: default
  namespace: istio-config
spec:
  egress:
  - hosts:
    - "./*"
    - "istio-system/*"

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
  name: default
  namespace: istio-config
spec:
  egress:
  - hosts:
    - "./*"
    - "istio-system/*"

The example below declares a Sidecar configuration in the prod-us1 namespace that overrides the global default defined above, and configures the sidecars in the namespace to allow egress traffic to public services in the prod-us1, prod-apis, and the istio-system namespaces.

apiVersion: networking.istio.io/v1alpha3
kind: Sidecar
metadata:
  name: default
  namespace: prod-us1
spec:
  egress:
  - hosts:
    - "prod-us1/*"
    - "prod-apis/*"
    - "istio-system/*"

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
  name: default
  namespace: prod-us1
spec:
  egress:
  - hosts:
    - "prod-us1/*"
    - "prod-apis/*"
    - "istio-system/*"

The following example declares a Sidecar configuration in the prod-us1 namespace for all pods with labels app: ratings belonging to the ratings.prod-us1 service. The workload accepts inbound HTTP traffic on port 9080. The traffic is then forwarded to the attached workload instance listening on a Unix domain socket. In the egress direction, in addition to the istio-system namespace, the sidecar proxies only HTTP traffic bound for port 9080 for services in the prod-us1 namespace.

apiVersion: networking.istio.io/v1alpha3
kind: Sidecar
metadata:
  name: ratings
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: ratings
  ingress:
  - port:
      number: 9080
      protocol: HTTP
      name: somename
    defaultEndpoint: unix:///var/run/someuds.sock
  egress:
  - port:
      number: 9080
      protocol: HTTP
      name: egresshttp
    hosts:
    - "prod-us1/*"
  - hosts:
    - "istio-system/*"

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
  name: ratings
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: ratings
  ingress:
  - port:
      number: 9080
      protocol: HTTP
      name: somename
    defaultEndpoint: unix:///var/run/someuds.sock
  egress:
  - port:
      number: 9080
      protocol: HTTP
      name: egresshttp
    hosts:
    - "prod-us1/*"
  - hosts:
    - "istio-system/*"

If the workload is deployed without IPTables-based traffic capture, the Sidecar configuration is the only way to configure the ports on the proxy attached to the workload instance. The following example declares a Sidecar configuration in the prod-us1 namespace for all pods with labels app: productpage belonging to the productpage.prod-us1 service. Assuming that these pods are deployed without IPtable rules (i.e. the istio-init container) and the proxy metadata ISTIO_META_INTERCEPTION_MODE is set to NONE, the specification, below, allows such pods to receive HTTP traffic on port 9080 (wrapped inside Istio mutual TLS) and forward it to the application listening on 127.0.0.1:8080. It also allows the application to communicate with a backing MySQL database on 127.0.0.1:3306, that then gets proxied to the externally hosted MySQL service at mysql.foo.com:3306.

apiVersion: networking.istio.io/v1alpha3
kind: Sidecar
metadata:
  name: no-ip-tables
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: productpage
  ingress:
  - port:
      number: 9080 # binds to proxy_instance_ip:9080 (0.0.0.0:9080, if no unicast IP is available for the instance)
      protocol: HTTP
      name: somename
    defaultEndpoint: 127.0.0.1:8080
    captureMode: NONE # not needed if metadata is set for entire proxy
  egress:
  - port:
      number: 3306
      protocol: MYSQL
      name: egressmysql
    captureMode: NONE # not needed if metadata is set for entire proxy
    bind: 127.0.0.1
    hosts:
    - "*/mysql.foo.com"

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
  name: no-ip-tables
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: productpage
  ingress:
  - port:
      number: 9080 # binds to proxy_instance_ip:9080 (0.0.0.0:9080, if no unicast IP is available for the instance)
      protocol: HTTP
      name: somename
    defaultEndpoint: 127.0.0.1:8080
    captureMode: NONE # not needed if metadata is set for entire proxy
  egress:
  - port:
      number: 3306
      protocol: MYSQL
      name: egressmysql
    captureMode: NONE # not needed if metadata is set for entire proxy
    bind: 127.0.0.1
    hosts:
    - "*/mysql.foo.com"

And the associated service entry for routing to mysql.foo.com:3306

apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
  name: external-svc-mysql
  namespace: ns1
spec:
  hosts:
  - mysql.foo.com
  ports:
  - number: 3306
    name: mysql
    protocol: MYSQL
  location: MESH_EXTERNAL
  resolution: DNS

apiVersion: networking.istio.io/v1beta1
kind: ServiceEntry
metadata:
  name: external-svc-mysql
  namespace: ns1
spec:
  hosts:
  - mysql.foo.com
  ports:
  - number: 3306
    name: mysql
    protocol: MYSQL
  location: MESH_EXTERNAL
  resolution: DNS

It is also possible to mix and match traffic capture modes in a single proxy. For example, consider a setup where internal services are on the 192.168.0.0/16 subnet. So, IP tables are setup on the VM to capture all outbound traffic on 192.168.0.0/16 subnet. Assume that the VM has an additional network interface on 172.16.0.0/16 subnet for inbound traffic. The following Sidecar configuration allows the VM to expose a listener on 172.16.1.32:80 (the VM’s IP) for traffic arriving from the 172.16.0.0/16 subnet.

NOTE: The ISTIO_META_INTERCEPTION_MODE metadata on the proxy in the VM should contain REDIRECT or TPROXY as its value, implying that IP tables based traffic capture is active.

apiVersion: networking.istio.io/v1alpha3
kind: Sidecar
metadata:
  name: partial-ip-tables
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: productpage
  ingress:
  - bind: 172.16.1.32
    port:
      number: 80 # binds to 172.16.1.32:80
      protocol: HTTP
      name: somename
    defaultEndpoint: 127.0.0.1:8080
    captureMode: NONE
  egress:
    # use the system detected defaults
    # sets up configuration to handle outbound traffic to services
    # in 192.168.0.0/16 subnet, based on information provided by the
    # service registry
  - captureMode: IPTABLES
    hosts:
    - "*/*"

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
  name: partial-ip-tables
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: productpage
  ingress:
  - bind: 172.16.1.32
    port:
      number: 80 # binds to 172.16.1.32:80
      protocol: HTTP
      name: somename
    defaultEndpoint: 127.0.0.1:8080
    captureMode: NONE
  egress:
    # use the system detected defaults
    # sets up configuration to handle outbound traffic to services
    # in 192.168.0.0/16 subnet, based on information provided by the
    # service registry
  - captureMode: IPTABLES
    hosts:
    - "*/*"

The following example declares a Sidecar configuration in the prod-us1 namespace for all pods with labels app: ratings belonging to the ratings.prod-us1 service. The service accepts inbound HTTPS traffic on port 8443 and the sidecar proxy terminates one way TLS using the given server certificates. The traffic is then forwarded to the attached workload instance listening on a Unix domain socket. It is expected that PeerAuthentication policy would be configured in order to set mTLS mode to “DISABLE” on specific ports. In this example, the mTLS mode is disabled on PORT 80. This feature is currently experimental.

apiVersion: networking.istio.io/v1alpha3
kind: Sidecar
metadata:
  name: ratings
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: ratings
  ingress:
  - port:
      number: 80
      protocol: HTTPS
      name: somename
    defaultEndpoint: unix:///var/run/someuds.sock
    tls:
      mode: SIMPLE
      privateKey: "/etc/certs/privatekey.pem"
      serverCertificate: "/etc/certs/servercert.pem"

apiVersion: v1
kind: Service
metadata:
  name: ratings
  labels:
    app: ratings
    service: ratings
spec:
  ports:
  - port: 8443
    name: https
    targetPort: 80
  selector:
    app: ratings

apiVersion: security.istio.io/v1beta1
kind: PeerAuthentication
metadata:
  name: ratings-peer-auth
  namespace: prod-us1
spec:
  selector:
    matchLabels:
      app: ratings
  mtls:
    mode: STRICT
  portLevelMtls:
    80:
      mode: DISABLE

In addition to configuring traffic capture and how traffic is forwarded to the app, it’s possible to control inbound connection pool settings. By default, Istio pushes connection pool settings from DestinationRules to both clients (for outbound connections to the service) as well as servers (for inbound connections to a service instance). Using the InboundConnectionPool and per-port ConnectionPool settings in a Sidecar allow you to control those connection pools for the server separately from the settings pushed to all clients.

apiVersion: networking.istio.io/v1alpha3
kind: Sidecar
metadata:
  name: connection-pool-settings
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: productpage
  inboundConnectionPool:
      http:
        http1MaxPendingRequests: 1024
        http2MaxRequests: 1024
        maxRequestsPerConnection: 1024
        maxRetries: 100
  ingress:
  - port:
      number: 80
      protocol: HTTP
      name: somename
    connectionPool:
      http:
        http1MaxPendingRequests: 1024
        http2MaxRequests: 1024
        maxRequestsPerConnection: 1024
        maxRetries: 100
      tcp:
        maxConnections: 100

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
  name: connection-pool-settings
  namespace: prod-us1
spec:
  workloadSelector:
    labels:
      app: productpage
  inboundConnectionPool:
      http:
        http1MaxPendingRequests: 1024
        http2MaxRequests: 1024
        maxRequestsPerConnection: 1024
        maxRetries: 100
  ingress:
  - port:
      number: 80
      protocol: HTTP
      name: somename
    connectionPool:
      http:
        http1MaxPendingRequests: 1024
        http2MaxRequests: 1024
        maxRequestsPerConnection: 1024
        maxRetries: 100
      tcp:
        maxConnections: 100

Sidecar

Sidecar describes the configuration of the sidecar proxy that mediates inbound and outbound communication of the workload instance to which it is attached.

Field	Type	Description	Required
`workloadSelector`	`WorkloadSelector`	Criteria used to select the specific set of pods/VMs on which this `Sidecar` configuration should be applied. If omitted, the `Sidecar` configuration will be applied to all workload instances in the same namespace.	No
`ingress`	`IstioIngressListener[]`	Ingress specifies the configuration of the sidecar for processing inbound traffic to the attached workload instance. If omitted, Istio will automatically configure the sidecar based on the information about the workload obtained from the orchestration platform (e.g., exposed ports, services, etc.). If specified, inbound ports are configured if and only if the workload instance is associated with a service.	No
`egress`	`IstioEgressListener[]`	Egress specifies the configuration of the sidecar for processing outbound traffic from the attached workload instance to other services in the mesh. If not specified, inherits the system detected defaults from the namespace-wide or the global default Sidecar.	No
`inboundConnectionPool`	`ConnectionPoolSettings`	Settings controlling the volume of connections Envoy will accept from the network. This default will apply for all inbound listeners and can be overridden per-port in the `Ingress` field. This configuration mirrors the `DestinationRule`’s connectionPool field. By default, Istio applies a service’s `DestinationRule` to client sidecars for outbound traffic directed at the service – the usual case folks think of when configuring a `DestinationRule` – but also to the server’s inbound sidecar. The `Sidecar`’s connection pool configures the server’s inbound sidecar directly, so its settings can be different than clients’. This is valuable, for example, when you have many clients calling few servers: a `DestinationRule` can limit the concurrency of any single client, while the `Sidecar` allows you to configure much higher concurrency on the server side. Connection pool settings for a server’s inbound sidecar are configured in the following precedence, highest to lowest: per-port `ConnectionPool` from the `Sidecar` top level `InboundConnectionPool` from the `Sidecar` per-port `TrafficPolicy.ConnectionPool` from the `DestinationRule` top level `TrafficPolicy.ConnectionPool` from the `DestinationRule` default connection pool settings (essentially unlimited) In every case, the connection pool settings are overriden, not merged.	No
`outboundTrafficPolicy`	`OutboundTrafficPolicy`	Configuration for the outbound traffic policy. If your application uses one or more external services that are not known apriori, setting the policy to `ALLOW_ANY` will cause the sidecars to route any unknown traffic originating from the application to its requested destination. If not specified, inherits the system detected defaults from the namespace-wide or the global default Sidecar.	No

IstioIngressListener

IstioIngressListener specifies the properties of an inbound traffic listener on the sidecar proxy attached to a workload instance.

Field	Type	Description	Required
`port`	`SidecarPort`	The port associated with the listener.	Yes
`bind`	`string`	The IP(IPv4 or IPv6) to which the listener should be bound. Unix domain socket addresses are not allowed in the bind field for ingress listeners. If omitted, Istio will automatically configure the defaults based on imported services and the workload instances to which this configuration is applied to.	No
`captureMode`	`CaptureMode`	The captureMode option dictates how traffic to the listener is expected to be captured (or not).	No
`defaultEndpoint`	`string`	The IP endpoint or Unix domain socket to which traffic should be forwarded to. This configuration can be used to redirect traffic arriving at the bind `IP:Port` on the sidecar to a `localhost:port` or Unix domain socket where the application workload instance is listening for connections. Arbitrary IPs are not supported. Format should be one of `127.0.0.1:PORT`, `[::1]:PORT` (forward to localhost), `0.0.0.0:PORT`, `[::]:PORT` (forward to the instance IP), or `unix:///path/to/socket` (forward to Unix domain socket).	No
`tls`	`ServerTLSSettings`	Set of TLS related options that will enable TLS termination on the sidecar for requests originating from outside the mesh. Currently supports only SIMPLE and MUTUAL TLS modes.	No
`connectionPool`	`ConnectionPoolSettings`	Settings controlling the volume of connections Envoy will accept from the network. This setting overrides the top-level default `inboundConnectionPool` to configure specific settings for this port. This configuration mirrors the `DestinationRule`’s PortTrafficPolicy.connectionPool field. This port level connection pool has the highest precedence in configuration, overriding both the `Sidecar`’s top level `InboundConnectionPool` as well as any connection pooling settings from the `DestinationRule`.	No

IstioEgressListener

IstioEgressListener specifies the properties of an outbound traffic listener on the sidecar proxy attached to a workload instance.

Field	Type	Description	Required
`port`	`SidecarPort`	The port associated with the listener. If using Unix domain socket, use 0 as the port number, with a valid protocol. The port if specified, will be used as the default destination port associated with the imported hosts. If the port is omitted, Istio will infer the listener ports based on the imported hosts. Note that when multiple egress listeners are specified, where one or more listeners have specific ports while others have no port, the hosts exposed on a listener port will be based on the listener with the most specific port.	No
`bind`	`string`	The IP(IPv4 or IPv6) or the Unix domain socket to which the listener should be bound to. Port MUST be specified if bind is not empty. Format: IPv4 or IPv6 address formats or `unix:///path/to/uds` or `unix://@foobar` (Linux abstract namespace). If omitted, Istio will automatically configure the defaults based on imported services, the workload instances to which this configuration is applied to and the captureMode. If captureMode is `NONE`, bind will default to 127.0.0.1.	No
`captureMode`	`CaptureMode`	When the bind address is an IP, the captureMode option dictates how traffic to the listener is expected to be captured (or not). captureMode must be DEFAULT or `NONE` for Unix domain socket binds.	No
`hosts`	`string[]`	One or more service hosts exposed by the listener in `namespace/dnsName` format. Services in the specified namespace matching `dnsName` will be exposed. The corresponding service can be a service in the service registry (e.g., a Kubernetes or cloud foundry service) or a service specified using a `ServiceEntry` or `VirtualService` configuration. Any associated `DestinationRule` in the same namespace will also be used. The `dnsName` should be specified using FQDN format, optionally including a wildcard character in the left-most component (e.g., `prod/.example.com`). Set the `dnsName` to to select all services from the specified namespace (e.g., `prod/`). The `namespace` can be set to , `.`, or `~`, representing any, the current, or no namespace, respectively. For example, `/foo.example.com` selects the service from any available namespace while `./foo.example.com` only selects the service from the namespace of the sidecar. If a host is set to `/`, Istio will configure the sidecar to be able to reach every service in the mesh that is exported to the sidecar’s namespace. The value `~/` can be used to completely trim the configuration for sidecars that simply receive traffic and respond, but make no outbound connections of their own. NOTE: Only services and configuration artifacts exported to the sidecar’s namespace (e.g., `exportTo` value of `*`) can be referenced. Private configurations (e.g., `exportTo` set to `.`) will not be available. Refer to the `exportTo` setting in `VirtualService`, `DestinationRule`, and `ServiceEntry` configurations for details.	Yes

WorkloadSelector

WorkloadSelector specifies the criteria used to determine if the Gateway, Sidecar, EnvoyFilter, ServiceEntry, or DestinationRule configuration can be applied to a proxy. The matching criteria includes the metadata associated with a proxy, workload instance info such as labels attached to the pod/VM, or any other info that the proxy provides to Istio during the initial handshake. If multiple conditions are specified, all conditions need to match in order for the workload instance to be selected. Currently, only label based selection mechanism is supported.

Field	Type	Description	Required
`labels`	`map<string, string>`	One or more labels that indicate a specific set of pods/VMs on which the configuration should be applied. The scope of label search is restricted to the configuration namespace in which the the resource is present.	No

OutboundTrafficPolicy

OutboundTrafficPolicy sets the default behavior of the sidecar for handling outbound traffic from the application. If your application uses one or more external services that are not known apriori, setting the policy to ALLOW_ANY will cause the sidecars to route any unknown traffic originating from the application to its requested destination. Users are strongly encouraged to use ServiceEntry configurations to explicitly declare any external dependencies, instead of using ALLOW_ANY, so that traffic to these services can be monitored.

Field	Type	Description	Required
`mode`	`Mode`		No

SidecarPort

Port describes the properties of a specific port of a service.

Field	Type	Description	Required
`number`	`uint32`	A valid non-negative integer port number.	No
`protocol`	`string`	The protocol exposed on the port. MUST BE one of HTTP\|HTTPS\|GRPC\|HTTP2\|MONGO\|TCP\|TLS. TLS can be either used to terminate non-HTTP based connections on a specific port or to route traffic based on SNI header to the destination without terminating the TLS connection.	No
`name`	`string`	Label assigned to the port.	No

OutboundTrafficPolicy.Mode

Name	Description
`REGISTRY_ONLY`	Outbound traffic will be restricted to services defined in the service registry as well as those defined through `ServiceEntry` configurations.
`ALLOW_ANY`	Outbound traffic to unknown destinations will be allowed, in case there are no services or `ServiceEntry` configurations for the destination port.

CaptureMode

CaptureMode describes how traffic to a listener is expected to be captured. Applicable only when the listener is bound to an IP.

Name	Description
`DEFAULT`	The default capture mode defined by the environment.
`IPTABLES`	Capture traffic using IPtables redirection.
`NONE`	No traffic capture. When used in an egress listener, the application is expected to explicitly communicate with the listener port or Unix domain socket. When used in an ingress listener, care needs to be taken to ensure that the listener port is not in use by other processes on the host.