Specifies the quotation character in CSV mode. The default is double-quote.

FORCE QUOTE

In CSV COPY TO mode, forces quoting to be used for all non-NULL values in each specified column. NULL output is never quoted.

FORCE NOT NULL

In CSV COPY FROM mode, process each specified column as though it were quoted and hence not a NULL value. For the default null string in CSV mode (nothing between two delimiters), this causes missing values to be evaluated as zero-length strings.

FILL MISSING FIELDS

In COPY FROM more for both TEXT and CSV, specifying FILL MISSING FIELDS will set missing trailing field values to NULL (instead of reporting an error) when a row of data has missing data fields at the end of a line or row. Blank rows, fields with a NOT NULL constraint, and trailing delimiters on a line will still report an error.

LOG ERRORS INTO [KEEP]

This is an optional clause that can precede a `SEGMENT REJECT LIMIT` clause to log information about rows with formatting errors. The `INTO ` clause specifies an error table where rows with formatting errors will be logged when running in single row error isolation mode. You can then examine this error table to see error rows that were not loaded (if any). If the \ specified already exists, it will be used. If it does not exist, it will be automatically generated. If the command auto-generates the error table and no errors are produced, the default is to drop the error table after the operation completes unless `KEEP` is specified. If the table is auto-generated and the error limit is exceeded, the entire transaction is rolled back and no error data is saved. If you want the error table to persist in this case, create the error table prior to running the `COPY`. An error table is defined as follows: “` pre CREATE TABLE ( cmdtime timestamptz, relname text, filename text, linenum int, bytenum int, errmsg text, rawdata text, rawbytes bytea ) DISTRIBUTED RANDOMLY; ”`

SEGMENT REJECT LIMIT [ROWS | PERCENT]

Runs a COPY FROM operation in single row error isolation mode. If the input rows have format errors they will be discarded provided that the reject limit count is not reached on any HAWQ segment instance during the load operation. The reject limit count can be specified as number of rows (the default) or percentage of total rows (1-100). If PERCENT is used, each segment starts calculating the bad row percentage only after the number of rows specified by the parameter gp_reject_percent_threshold has been processed. The default for gp_reject_percent_threshold is 300 rows. Constraint errors such as violation of a NOT NULL or CHECK constraint will still be handled in ‘all-or-nothing’ input mode. If the limit is not reached, all good rows will be loaded and any error rows discarded.

Notes

COPY can only be used with tables, not with views. However, you can write COPY (SELECT * FROM viewname) TO ...

The BINARY key word causes all data to be stored/read as binary format rather than as text. It is somewhat faster than the normal text mode, but a binary-format file is less portable across machine architectures and HAWQ versions. Also, you cannot run COPY FROM in single row error isolation mode if the data is in binary format.

You must have SELECT privilege on the table whose values are read by COPY TO, and insert privilege on the table into which values are inserted by COPY FROM.

Files named in a COPY command are read or written directly by the database server, not by the client application. Therefore, they must reside on or be accessible to the HAWQ master host machine, not the client. They must be accessible to and readable or writable by the HAWQ system user (the user ID the server runs as), not the client. COPY naming a file is only allowed to database superusers, since it allows reading or writing any file that the server has privileges to access.

COPY FROM will invoke any check constraints on the destination table. However, it will not invoke rewrite rules. Note that in this release, violations of constraints are not evaluated for single row error isolation mode.

COPY input and output is affected by DateStyle. To ensure portability to other HAWQ installations that might use non-default DateStyle settings, DateStyle should be set to ISO before using COPY TO.

By default, COPY stops operation at the first error. This should not lead to problems in the event of a COPY TO, but the target table will already have received earlier rows in a COPY FROM. These rows will not be visible or accessible, but they still occupy disk space. This may amount to a considerable amount of wasted disk space if the failure happened well into a large COPY FROM operation. You may wish to use single row error isolation mode to filter out error rows while still loading good rows.

COPY supports creating readable foreign tables with error tables. The default for concurrently inserting into the error table is 127. You can use error tables with foreign tables under the following circumstances:

• Multiple foreign tables can use different error tables
• Multiple foreign tables cannot use the same error table

File Formats

File formats supported by COPY.

Text Format When COPY is used without the BINARY or CSV options, the data read or written is a text file with one line per table row. Columns in a row are separated by the character (tab by default). The column values themselves are strings generated by the output function, or acceptable to the input function, of each attribute’s data type. The specified null string is used in place of columns that are null. COPY FROM will raise an error if any line of the input file contains more or fewer columns than are expected. If OIDS is specified, the OID is read or written as the first column, preceding the user data columns.

The data file has two reserved characters that have special meaning to COPY:

• The designated delimiter character (tab by default), which is used to separate fields in the data file.
• A UNIX-style line feed (\n or 0x0a), which is used to designate a new row in the data file. It is strongly recommended that applications generating COPY data convert data line feeds to UNIX-style line feeds rather than Microsoft Windows style carriage return line feeds (\r\n or 0x0a 0x0d).

If your data contains either of these characters, you must escape the character so COPY treats it as data and not as a field separator or new row.

By default, the escape character is a \ (backslash) for text-formatted files and a " (double quote) for csv-formatted files. If you want to use a different escape character, you can do so using the ESCAPE ASclause. Make sure to choose an escape character that is not used anywhere in your data file as an actual data value. You can also disable escaping in text-formatted files by using ESCAPE 'OFF'.

For example, suppose you have a table with three columns and you want to load the following three fields using COPY.

• percentage sign = %
• vertical bar = |
• backslash = \

Your designated character is | (pipe character), and your designated character is * (asterisk). The formatted row in your data file would look like this:

percentage sign = % | vertical bar = *| | backslash = \

Notice how the pipe character that is part of the data has been escaped using the asterisk character (*). Also notice that we do not need to escape the backslash since we are using an alternative escape character.

The following characters must be preceded by the escape character if they appear as part of a column value: the escape character itself, newline, carriage return, and the current delimiter character. You can specify a different escape character using the ESCAPE AS clause.

CSV Format

This format is used for importing and exporting the Comma Separated Value (CSV) file format used by many other programs, such as spreadsheets. Instead of the escaping used by HAWQ standard text mode, it produces and recognizes the common CSV escaping mechanism.

The values in each record are separated by the DELIMITER character. If the value contains the delimiter character, the QUOTE character, the ESCAPE character (which is double quote by default), the NULL string, a carriage return, or line feed character, then the whole value is prefixed and suffixed by the QUOTE character. You can also use FORCE QUOTE to force quotes when outputting non-NULL values in specific columns.

The CSV format has no standard way to distinguish a NULL value from an empty string. HAWQ COPY handles this by quoting. A NULL is output as the NULL string and is not quoted, while a data value matching the NULL string is quoted. Therefore, using the default settings, a NULL is written as an unquoted empty string, while an empty string is written with double quotes (“”). Reading values follows similar rules. You can use FORCE NOT NULL to prevent NULL input comparisons for specific columns.

Because backslash is not a special character in the CSV format, \., the end-of-data marker, could also appear as a data value. To avoid any misinterpretation, a \. data value appearing as a lone entry on a line is automatically quoted on output, and on input, if quoted, is not interpreted as the end-of-data marker. If you are loading a file created by another application that has a single unquoted column and might have a value of \., you might need to quote that value in the input file.

Note: In CSV mode, all characters are significant. A quoted value surrounded by white space, or any characters other than DELIMITER, will include those characters. This can cause errors if you import data from a system that pads CSV lines with white space out to some fixed width. If such a situation arises you might need to preprocess the CSV file to remove the trailing white space, before importing the data into HAWQ.

Note: CSV mode will both recognize and produce CSV files with quoted values containing embedded carriage returns and line feeds. Thus the files are not strictly one line per table row like text-mode files.

Note: Many programs produce strange and occasionally perverse CSV files, so the file format is more a convention than a standard. Thus you might encounter some files that cannot be imported using this mechanism, and COPY might produce files that other programs cannot process.

Binary Format

The BINARY format consists of a file header, zero or more tuples containing the row data, and a file trailer. Headers and data are in network byte order.

• File Header — The file header consists of 15 bytes of fixed fields, followed by a variable-length header extension area. The fixed fields are:
  • Signature — 11-byte sequence PGCOPY\n\377\r\n\0 — note that the zero byte is a required part of the signature. (The signature is designed to allow easy identification of files that have been munged by a non-8-bit-clean transfer. This signature will be changed by end-of-line-translation filters, dropped zero bytes, dropped high bits, or parity changes.)
  • Flags field — 32-bit integer bit mask to denote important aspects of the file format. Bits are numbered from 0 (LSB) to 31 (MSB). Note that this field is stored in network byte order (most significant byte first), as are all the integer fields used in the file format. Bits 16-31 are reserved to denote critical file format issues; a reader should abort if it finds an unexpected bit set in this range. Bits 0-15 are reserved to signal backwards-compatible format issues; a reader should simply ignore any unexpected bits set in this range. Currently only one flag is defined, and the rest must be zero (Bit 16: 1 if data has OIDs, 0 if not).
  • Header extension area length — 32-bit integer, length in bytes of remainder of header, not including self. Currently, this is zero, and the first tuple follows immediately. Future changes to the format might allow additional data to be present in the header. A reader should silently skip over any header extension data it does not know what to do with. The header extension area is envisioned to contain a sequence of self-identifying chunks. The flags field is not intended to tell readers what is in the extension area. Specific design of header extension contents is left for a later release.

• Tuples — Each tuple begins with a 16-bit integer count of the number of fields in the tuple. (Presently, all tuples in a table will have the same count, but that might not always be true.) Then, repeated for each field in the tuple, there is a 32-bit length word followed by that many bytes of field data. (The length word does not include itself, and can be zero.) As a special case, -1 indicates a NULL field value. No value bytes follow in the NULL case.

  There is no alignment padding or any other extra data between fields.

  Presently, all data values in a COPY BINARY file are assumed to be in binary format (format code one). It is anticipated that a future extension may add a header field that allows per-column format codes to be specified.

  If OIDs are included in the file, the OID field immediately follows the field-count word. It is a normal field except that it’s not included in the field-count. In particular it has a length word — this will allow handling of 4-byte vs. 8-byte OIDs without too much pain, and will allow OIDs to be shown as null if that ever proves desirable.

• File Trailer — The file trailer consists of a 16-bit integer word containing -1. This is easily distinguished from a tuple’s field-count word. A reader should report an error if a field-count word is neither -1 nor the expected number of columns. This provides an extra check against somehow getting out of sync with the data.

Examples

Copy a table to the client using the vertical bar (|) as the field delimiter:

COPY country TO STDOUT WITH DELIMITER '|';

Copy data from a file into the country table:

COPY country FROM '/home/usr1/sql/country_data';

Copy into a file just the countries whose names start with ‘A’:

COPY (SELECT * FROM country WHERE country_name LIKE 'A%') TO 
'/home/usr1/sql/a_list_countries.copy';

Create an error table called err_sales to use with single row error isolation mode:

CREATE TABLE err_sales ( cmdtime timestamptz, relname text, 
filename text, linenum int, bytenum int, errmsg text, rawdata text, rawbytes bytea ) DISTRIBUTED RANDOMLY;

Copy data from a file into the sales table using single row error isolation mode:

COPY sales FROM '/home/usr1/sql/sales_data' LOG ERRORS INTO 
err_sales SEGMENT REJECT LIMIT 10 ROWS;

Compatibility

There is no COPY statement in the SQL standard.

See Also

CREATE EXTERNAL TABLE