AudioStreamPlayer3D

AudioStreamPlayer3D

Plays positional sound in 3D space.

Description

Plays a sound effect with directed sound effects, dampens with distance if needed, generates effect of hearable position in space. For greater realism, a low-pass filter is automatically applied to distant sounds. This can be disabled by setting attenuation_filter_cutoff_hz to 20500.

By default, audio is heard from the camera position. This can be changed by adding a Listener node to the scene and enabling it by calling Listener.make_current on it.

See also AudioStreamPlayer to play a sound non-positionally.

Note: Hiding an AudioStreamPlayer3D node does not disable its audio output. To temporarily disable an AudioStreamPlayer3D‘s audio output, set unit_db to a very low value like -100 (which isn’t audible to human hearing).

Tutorials

音频流

Properties

int	area_mask	`1`
float	attenuation_filter_cutoff_hz	`5000.0`
float	attenuation_filter_db	`-24.0`
AttenuationModel	attenuation_model	`0`
bool	autoplay	`false`
String	bus	`“Master”`
DopplerTracking	doppler_tracking	`0`
float	emission_angle_degrees	`45.0`
bool	emission_angle_enabled	`false`
float	emission_angle_filter_attenuation_db	`-12.0`
float	max_db	`3.0`
float	max_distance	`0.0`
OutOfRangeMode	out_of_range_mode	`0`
float	pitch_scale	`1.0`
bool	playing	`false`
AudioStream	stream
bool	stream_paused	`false`
float	unit_db	`0.0`
float	unit_size	`1.0`

Methods

float	get_playback_position ( )
AudioStreamPlayback	get_stream_playback ( )
void	play ( float from_position=0.0 )
void	seek ( float to_position )
void	stop ( )

Signals

finished ( )

Emitted when the audio stops playing.

Enumerations

enum AttenuationModel:

ATTENUATION_INVERSE_DISTANCE = 0 —- Linear dampening of loudness according to distance.
ATTENUATION_INVERSE_SQUARE_DISTANCE = 1 —- Squared dampening of loudness according to distance.
ATTENUATION_LOGARITHMIC = 2 —- Logarithmic dampening of loudness according to distance.
ATTENUATION_DISABLED = 3 —- No dampening of loudness according to distance. The sound will still be heard positionally, unlike an AudioStreamPlayer.

enum OutOfRangeMode:

OUT_OF_RANGE_MIX = 0 —- Mix this audio in, even when it’s out of range. This increases CPU usage, but keeps the sound playing at the correct position if the camera leaves and enters the AudioStreamPlayer3D‘s max_distance radius.
OUT_OF_RANGE_PAUSE = 1 —- Pause this audio when it gets out of range. This decreases CPU usage, but will cause the sound to restart if the camera leaves and enters the AudioStreamPlayer3D‘s max_distance radius.

enum DopplerTracking:

DOPPLER_TRACKING_DISABLED = 0 —- Disables doppler tracking.
DOPPLER_TRACKING_IDLE_STEP = 1 —- Executes doppler tracking in idle step.
DOPPLER_TRACKING_PHYSICS_STEP = 2 —- Executes doppler tracking in physics step.

Property Descriptions

int area_mask

Default	`1`
Setter	set_area_mask(value)
Getter	get_area_mask()

Areas in which this sound plays.

float attenuation_filter_cutoff_hz

Default	`5000.0`
Setter	set_attenuation_filter_cutoff_hz(value)
Getter	get_attenuation_filter_cutoff_hz()

Dampens audio using a low-pass filter above this frequency, in Hz. To disable the dampening effect entirely, set this to 20500 as this frequency is above the human hearing limit.

float attenuation_filter_db

Default	`-24.0`
Setter	set_attenuation_filter_db(value)
Getter	get_attenuation_filter_db()

Amount how much the filter affects the loudness, in decibels.

AttenuationModel attenuation_model

Default	`0`
Setter	set_attenuation_model(value)
Getter	get_attenuation_model()

Decides if audio should get quieter with distance linearly, quadratically, logarithmically, or not be affected by distance, effectively disabling attenuation.

bool autoplay

Default	`false`
Setter	set_autoplay(value)
Getter	is_autoplay_enabled()

If true, audio plays when the AudioStreamPlayer3D node is added to scene tree.

String bus

Default	`“Master”`
Setter	set_bus(value)
Getter	get_bus()

The bus on which this audio is playing.

DopplerTracking doppler_tracking

Default	`0`
Setter	set_doppler_tracking(value)
Getter	get_doppler_tracking()

Decides in which step the Doppler effect should be calculated.

float emission_angle_degrees

Default	`45.0`
Setter	set_emission_angle(value)
Getter	get_emission_angle()

The angle in which the audio reaches cameras undampened.

bool emission_angle_enabled

Default	`false`
Setter	set_emission_angle_enabled(value)
Getter	is_emission_angle_enabled()

If true, the audio should be dampened according to the direction of the sound.

float emission_angle_filter_attenuation_db

Default	`-12.0`
Setter	set_emission_angle_filter_attenuation_db(value)
Getter	get_emission_angle_filter_attenuation_db()

Dampens audio if camera is outside of emission_angle_degrees and emission_angle_enabled is set by this factor, in decibels.

float max_db

Default	`3.0`
Setter	set_max_db(value)
Getter	get_max_db()

Sets the absolute maximum of the soundlevel, in decibels.

float max_distance

Default	`0.0`
Setter	set_max_distance(value)
Getter	get_max_distance()

Sets the distance from which the out_of_range_mode takes effect. Has no effect if set to 0.

OutOfRangeMode out_of_range_mode

Default	`0`
Setter	set_out_of_range_mode(value)
Getter	get_out_of_range_mode()

Decides if audio should pause when source is outside of max_distance range.

float pitch_scale

Default	`1.0`
Setter	set_pitch_scale(value)
Getter	get_pitch_scale()

The pitch and the tempo of the audio, as a multiplier of the audio sample’s sample rate.

bool playing

Default	`false`
Getter	is_playing()

If true, audio is playing.

AudioStream stream

Setter	set_stream(value)
Getter	get_stream()

The AudioStream resource to be played.

bool stream_paused

Default	`false`
Setter	set_stream_paused(value)
Getter	get_stream_paused()

If true, the playback is paused. You can resume it by setting stream_paused to false.

float unit_db

Default	`0.0`
Setter	set_unit_db(value)
Getter	get_unit_db()

The base sound level unaffected by dampening, in decibels.

float unit_size

Default	`1.0`
Setter	set_unit_size(value)
Getter	get_unit_size()

The factor for the attenuation effect. Higher values make the sound audible over a larger distance.

Method Descriptions

float get_playback_position ( )

Returns the position in the AudioStream.

AudioStreamPlayback get_stream_playback ( )

Returns the AudioStreamPlayback object associated with this AudioStreamPlayer3D.

void play ( float from_position=0.0 )

Plays the audio from the given position from_position, in seconds.

void seek ( float to_position )

Sets the position from which audio will be played, in seconds.

void stop ( )

Stops the audio.