GDNative C++ example

Introduction

This tutorial builds on top of the information given in the GDNative C example, so we highly recommend you read that first.

The C++ bindings for GDNative are built on top of the NativeScript GDNative API and provide a nicer way to “extend” nodes in Godot using C++. This is equivalent to writing scripts in GDScript, but in C++ instead.

Godot 3.1 saw the introduction of the NativeScript 1.1 additions that enabled the GDNative team to build a nicer C++ bindings library. These changes have now been merged into the master branch and will be the way we go forward. If you want to write a C++ GDNative plugin that also supports Godot 3.0 you will need to use the 3.0 branch and the NativeScript 1.0 syntax. We’ll be showing them side by side in this writeup.

You can download the full example we’ll be creating in this tutorial on GitHub.

Setting up the project

There are a few prerequisites you’ll need:

See also Compiling as the build tools are identical to the ones you need to compile Godot from source.

You can download these repositories from GitHub or let Git do the work for you. Note that these repositories now have different branches for different versions of Godot. GDNative modules written for an earlier version of Godot will work in newer versions (with the exception of one breaking change in ARVR interfaces between 3.0 and 3.1) but not vice versa so make sure you download the correct branch. Also note that the version of Godot you use to generate the api.json with becomes your minimum version.

If you are versioning your project using Git, it is a good idea to add them as Git submodules:

Godot

Godot 3.0

  1. mkdir gdnative_cpp_example
  2. cd gdnative_cpp_example
  3. git init
  4. git submodule add https://github.com/godotengine/godot-cpp
  5. cd godot-cpp
  6. git submodule update --init
  1. mkdir gdnative_cpp_example
  2. cd gdnative_cpp_example
  3. git init
  4. git submodule add -b 3.0 https://github.com/godotengine/godot-cpp
  5. cd godot-cpp
  6. git submodule update --init

If you decide to just download the repositories or clone them into your project folder, make sure to keep the folder layout identical to the one described here, as much of the code we’ll be showcasing here assumes the project follows this layout.

Do make sure you clone recursive to pull in both repositories:

Godot

Godot 3.0

  1. mkdir gdnative_cpp_example
  2. cd gdnative_cpp_example
  3. git clone --recursive https://github.com/godotengine/godot-cpp
  1. mkdir gdnative_cpp_example
  2. cd gdnative_cpp_example
  3. git clone --recursive -b 3.0 https://github.com/godotengine/godot-cpp

Note

godot-cpp now includes godot_headers as a nested submodule, if you’ve manually downloaded them please make sure to place godot_headers inside of the godot-cpp folder.

You don’t have to do it this way but we’ve found it easiest to manage. If you decide to just download the repositories or just clone them into your folder, make sure to keep the folder layout the same as we’ve setup here as much of the code we’ll be showcasing here assumes the project has this layout.

If you cloned the example from the link specified in the introduction, the submodules are not automatically initialized. You will need to execute the following commands:

  1. cd gdnative_cpp_example
  2. git submodule update --init --recursive

This will clone these two repositories into your project folder.

Building the C++ bindings

Now that we’ve downloaded our prerequisites, it is time to build the C++ bindings.

The repository contains a copy of the metadata for the current Godot release, but if you need to build these bindings for a newer version of Godot, simply call the Godot executable:

  1. godot --gdnative-generate-json-api api.json

Place the resulting api.json file in the project folder and add use_custom_api_file=yes custom_api_file=../api.json to the scons command below.

To generate and compile the bindings, use this command (replacing <platform> with windows, linux or osx depending on your OS):

To speed up compilation, add -jN at the end of the SCons command line where N is the number of CPU threads you have on your system. The example below uses 4 threads.

  1. cd godot-cpp
  2. scons platform=<platform> generate_bindings=yes -j4
  3. cd ..

This step will take a while. When it is completed, you should have static libraries that can be compiled into your project stored in godot-cpp/bin/.

At some point in the future, compiled binaries will be available, making this step optional.

Note

You may need to add bits=64 to the command on Windows or Linux. We’re still working on better auto detection.

Creating a simple plugin

Now it’s time to build an actual plugin. We’ll start by creating an empty Godot project in which we’ll place a few files.

Open Godot and create a new project. For this example, we will place it in a folder called demo inside our GDNative module’s folder structure.

In our demo project, we’ll create a scene containing a Node called “Main” and we’ll save it as main.tscn. We’ll come back to that later.

Back in the top-level GDNative module folder, we’re also going to create a subfolder called src in which we’ll place our source files.

You should now have demo, godot-cpp, godot_headers, and src directories in your GDNative module.

In the src folder, we’ll start with creating our header file for the GDNative node we’ll be creating. We will name it gdexample.h:

NativeScript 1.1

NativeScript 1.0

  1. #ifndef GDEXAMPLE_H
  2. #define GDEXAMPLE_H
  4. #include <Godot.hpp>
  5. #include <Sprite.hpp>
  7. namespace godot {
  9. class GDExample : public Sprite {
  10.     GODOT_CLASS(GDExample, Sprite)
  12. private:
  13.     float time_passed;
  15. public:
  16.     static void _register_methods();
  18.     GDExample();
  19.     ~GDExample();
  21.     void _init(); // our initializer called by Godot
  23.     void _process(float delta);
  24. };
  26. }
  28. #endif
  1. #ifndef GDEXAMPLE_H
  2. #define GDEXAMPLE_H
  4. #include <Godot.hpp>
  5. #include <Sprite.hpp>
  7. namespace godot {
  9. class GDExample : public godot::GodotScript<Sprite> {
  10.     GODOT_CLASS(GDExample)
  12. private:
  13.     float time_passed;
  15. public:
  16.     static void _register_methods();
  18.     GDExample();
  19.     ~GDExample();
  21.     void _process(float delta);
  22. };
  24. }
  26. #endif

There are a few things of note to the above. We’re including Godot.hpp which contains all our basic definitions. After that, we include Sprite.hpp which contains bindings to the Sprite class. We’ll be extending this class in our module.

We’re using the namespace godot, since everything in GDNative is defined within this namespace.

Then we have our class definition, which inherits from our Sprite through a container class. We’ll see a few side effects of this later on. The GODOT_CLASS macro sets up a few internal things for us.

After that, we declare a single member variable called time_passed.

In the next block we’re defining our methods, we obviously have our constructor and destructor defined, but there are two other functions that will likely look familiar to some, and one new method.

The first is _register_methods, which is a static function that Godot will call to find out which methods can be called on our NativeScript and which properties it exposes. The second is our _process function, which will work exactly the same as the _process function you’re used to in GDScript. The third is our _init function which is called after Godot has properly set up our object. It has to exist even if you don’t place any code in it.

Let’s implement our functions by creating our gdexample.cpp file:

NativeScript 1.1

NativeScript 1.0

  1. #include "gdexample.h"
  3. using namespace godot;
  5. void GDExample::_register_methods() {
  6.     register_method("_process", &GDExample::_process);
  7. }
  9. GDExample::GDExample() {
  10. }
  12. GDExample::~GDExample() {
  13.     // add your cleanup here
  14. }
  16. void GDExample::_init() {
  17.     // initialize any variables here
  18.     time_passed = 0.0;
  19. }
  21. void GDExample::_process(float delta) {
  22.     time_passed += delta;
  24.     Vector2 new_position = Vector2(10.0 + (10.0 * sin(time_passed * 2.0)), 10.0 + (10.0 * cos(time_passed * 1.5)));
  26.     set_position(new_position);
  27. }
  1. #include "gdexample.h"
  3. using namespace godot;
  5. void GDExample::_register_methods() {
  6.     register_method((char *)"_process", &GDExample::_process);
  7. }
  9. GDExample::GDExample() {
  10.     // Initialize any variables here
  11.     time_passed = 0.0;
  12. }
  14. GDExample::~GDExample() {
  15.     // Add your cleanup procedure here
  16. }
  18. void GDExample::_process(float delta) {
  19.     time_passed += delta;
  21.     Vector2 new_position = Vector2(10.0 + (10.0 * sin(time_passed * 2.0)), 10.0 + (10.0 * cos(time_passed * 1.5)));
  23.     owner->set_position(new_position);
  24. }

This one should be straightforward. We’re implementing each method of our class that we defined in our header file. Note that the register_method call must expose the _process method, otherwise Godot will not be able to use it. However, we do not have to tell Godot about our constructor, destructor and _init functions.

The other method of note is our _process function, which simply keeps track of how much time has passed and calculates a new position for our sprite using a simple sine and cosine function. What stands out is calling owner->set_position to call one of the build in methods of our Sprite. This is because our class is a container class; owner points to the actual Sprite node our script relates to. In the upcoming NativeScript 1.1, set_position can be called directly on our class.

There is one more C++ file we need; we’ll name it gdlibrary.cpp. Our GDNative plugin can contain multiple NativeScripts, each with their own header and source file like we’ve implemented GDExample up above. What we need now is a small bit of code that tells Godot about all the NativeScripts in our GDNative plugin.

  1. #include "gdexample.h"
  3. extern "C" void GDN_EXPORT godot_gdnative_init(godot_gdnative_init_options *o) {
  4.     godot::Godot::gdnative_init(o);
  5. }
  7. extern "C" void GDN_EXPORT godot_gdnative_terminate(godot_gdnative_terminate_options *o) {
  8.     godot::Godot::gdnative_terminate(o);
  9. }
  11. extern "C" void GDN_EXPORT godot_nativescript_init(void *handle) {
  12.     godot::Godot::nativescript_init(handle);
  14.     godot::register_class<godot::GDExample>();
  15. }

Note that we are not using the godot namespace here, since the three functions implemented here need to be defined without a namespace.

The godot_gdnative_init and godot_gdnative_terminate functions get called respectively when Godot loads our plugin and when it unloads it. All we’re doing here is parse through the functions in our bindings module to initialize them, but you might have to set up more things depending on your needs.

The important function is the third function called godot_nativescript_init. We first call a function in our bindings library that does its usual stuff. After that, we call the function register_class for each of our classes in our library.

Compiling the plugin

We cannot easily write by hand a SConstruct file that SCons would use for building. For the purpose of this example, just use this hardcoded SConstruct file we’ve prepared. We’ll cover a more customizable, detailed example on how to use these build files in a subsequent tutorial.

Note

This SConstruct file was written to be used with the latest godot-cpp master, you may need to make small changes using it with older versions or refer to the SConstruct file in the Godot 3.0 documentation.

Once you’ve downloaded the SConstruct file, place it in your GDNative module folder besides godot-cpp, godot_headers and demo, then run:

  1. scons platform=<platform>

You should now be able to find the module in demo/bin/<platform>.

Note

Here, we’ve compiled both godot-cpp and our gdexample library as debug builds. For optimized builds, you should compile them using the target=release switch.

Using the GDNative module

Before we jump back into Godot, we need to create two more files in demo/bin/. Both can be created using the Godot editor, but it may be faster to create them directly.

The first one is a file that lets Godot know what dynamic libraries should be loaded for each platform and is called gdexample.gdnlib.

  1. [general]
  3. singleton=false
  4. load_once=true
  5. symbol_prefix="godot_"
  6. reloadable=false
  8. [entry]
  10. X11.64="res://bin/x11/libgdexample.so"
  11. Windows.64="res://bin/win64/libgdexample.dll"
  12. OSX.64="res://bin/osx/libgdexample.dylib"
  14. [dependencies]
  16. X11.64=[]
  17. Windows.64=[]
  18. OSX.64=[]

This file contains a general section that controls how the module is loaded. It also contains a prefix section which should be left on godot_ for now. If you change this, you’ll need to rename various functions that are used as entry points. This was added for the iPhone platform because it doesn’t allow dynamic libraries to be deployed, yet GDNative modules are linked statically.

The entry section is the important bit: it tells Godot the location of the dynamic library in the project’s filesystem for each supported platform. It will also result in just that file being exported when you export the project, which means the data pack won’t contain libraries that are incompatible with the target platform.

Finally, the dependencies section allows you to name additional dynamic libraries that should be included as well. This is important when your GDNative plugin implements someone else’s library and requires you to supply a third-party dynamic library with your project.

If you double click on the gdexample.gdnlib file within Godot, you’ll see there are far more options to set:

../../../_images/gdnative_library.png

The second file we need to create is a file used by each NativeScript we’ve added to our plugin. We’ll name it gdexample.gdns for our gdexample NativeScript.

  1. [gd_resource type="NativeScript" load_steps=2 format=2]
  3. [ext_resource path="res://bin/gdexample.gdnlib" type="GDNativeLibrary" id=1]
  5. [resource]
  7. resource_name = "gdexample"
  8. class_name = "GDExample"
  9. library = ExtResource( 1 )

This is a standard Godot resource; you could just create it directly in your scene, but saving it to a file makes it much easier to reuse it in other places. This resource points to our gdnlib file, so that Godot can know which dynamic library contains our NativeScript. It also defines the class_name which identifies the NativeScript in our plugin we want to use.

Time to jump back into Godot. We load up the main scene we created way back in the beginning and now add a Sprite to our scene:

../../../_images/gdnative_cpp_nodes.png

We’re going to assign the Godot logo to this sprite as our texture, disable the centered property and drag our gdexample.gdns file onto the script property of the sprite:

../../../_images/gdnative_cpp_sprite.png

We’re finally ready to run the project:

../../../_images/gdnative_cpp_animated.gif

Adding properties

GDScript allows you to add properties to your script using the export keyword. In GDNative you have to register the properties and there are two ways of doing this. You can either bind directly to a member or use a setter and getter function.

Note

There is a third option, just like in GDScript you can directly implement the _get_property_list, _get and _set methods of an object but that goes far beyond the scope of this tutorial.

We’ll examine both starting with the direct bind. Lets add a property that allows us to control the amplitude of our wave.

In our gdexample.h file we simply need to add a member variable like so:

  1. ...
  2. private:
  3.     float time_passed;
  4.     float amplitude;
  5. ...

In our gdexample.cpp file we need to make a number of changes, we will only show the methods we end up changing, don’t remove the lines we’re omitting:

NativeScript 1.1

NativeScript 1.0

  1. void GDExample::_register_methods() {
  2.     register_method("_process", &GDExample::_process);
  3.     register_property<GDExample, float>("amplitude", &GDExample::amplitude, 10.0);
  4. }
  6. void GDExample::_init() {
  7.     // initialize any variables here
  8.     time_passed = 0.0;
  9.     amplitude = 10.0;
  10. }
  12. void GDExample::_process(float delta) {
  13.     time_passed += delta;
  15.     Vector2 new_position = Vector2(
  16.         amplitude + (amplitude * sin(time_passed * 2.0)),
  17.         amplitude + (amplitude * cos(time_passed * 1.5))
  18.     );
  20.     set_position(new_position);
  21. }
  1. void GDExample::_register_methods() {
  2.     register_method((char *)"_process", &GDExample::_process);
  3.     register_property<GDExample, float>("amplitude", &GDExample::amplitude, 10.0);
  4. }
  6. GDExample::GDExample() {
  7.     // initialize any variables here
  8.     time_passed = 0.0;
  9.     amplitude = 10.0;
  10. }
  12. void GDExample::_process(float delta) {
  13.     time_passed += delta;
  15.     Vector2 new_position = Vector2(
  16.         amplitude + (amplitude * sin(time_passed * 2.0)),
  17.         amplitude + (amplitude * cos(time_passed * 1.5))
  18.     );
  20.     owner->set_position(new_position);
  21. }

Once you compile the module with these changes in place you will see that a property has been added to our interface. You can now change this property and when you run your project, you will see that our Godot icon travels along a larger figure.

Note

The reloadable property in the gdexample.gdnlib file must be set to true for the Godot editor to automatically pick up the newly added property.

However, this setting should be used with care especially when tool classes are used, as the editor might hold objects then that have script instances attached to them that are managed by a GDNative library.

Lets do the same but for the speed of our animation and use a setter and getter function. Our gdexample.h header file again only needs a few more lines of code:

  1. ...
  2.     float amplitude;
  3.     float speed;
  4. ...
  5.     void _process(float delta);
  6.     void set_speed(float p_speed);
  7.     float get_speed();
  8. ...

This requires a few more changes to our gdexample.cpp file, again we’re only showing the methods that have changed so don’t remove anything we’re omitting:

NativeScript 1.1

NativeScript 1.0

  1. void GDExample::_register_methods() {
  2.     register_method("_process", &GDExample::_process);
  3.     register_property<GDExample, float>("amplitude", &GDExample::amplitude, 10.0);
  4.     register_property<GDExample, float>("speed", &GDExample::set_speed, &GDExample::get_speed, 1.0);
  5. }
  7. void GDExample::_init() {
  8.     // initialize any variables here
  9.     time_passed = 0.0;
  10.     amplitude = 10.0;
  11.     speed = 1.0;
  12. }
  14. void GDExample::_process(float delta) {
  15.     time_passed += speed * delta;
  17.     Vector2 new_position = Vector2(
  18.         amplitude + (amplitude * sin(time_passed * 2.0)),
  19.         amplitude + (amplitude * cos(time_passed * 1.5))
  20.     );
  22.     set_position(new_position);
  23. }
  25. void GDExample::set_speed(float p_speed) {
  26.     speed = p_speed;
  27. }
  29. float GDExample::get_speed() {
  30.     return speed;
  31. }
  1. void GDExample::_register_methods() {
  2.     register_method((char *)"_process", &GDExample::_process);
  3.     register_property<GDExample, float>("amplitude", &GDExample::amplitude, 10.0);
  4.     register_property<GDExample, float>("speed", &GDExample::set_speed, &GDExample::get_speed, 1.0);
  5. }
  7. GDExample::GDExample() {
  8.     // initialize any variables here
  9.     time_passed = 0.0;
  10.     amplitude = 10.0;
  11.     speed = 1.0;
  12. }
  14. void GDExample::_process(float delta) {
  15.     time_passed += speed * delta;
  17.     Vector2 new_position = Vector2(
  18.         amplitude + (amplitude * sin(time_passed * 2.0)),
  19.         amplitude + (amplitude * cos(time_passed * 1.5))
  20.     );
  22.     owner->set_position(new_position);
  23. }
  25. void GDExample::set_speed(float p_speed) {
  26.     speed = p_speed;
  27. }
  29. float GDExample::get_speed() {
  30.     return speed;
  31. }

Now when the project is compiled we’ll see another property called speed. Changing its value will make the animation go faster or slower.

For this example there is no obvious advantage of using a setter and getter. It is just more code to write. For a simple example as this there may be a good reason for a setter if you want to react on the variable being changed but in many cases just binding the variable will be enough.

Getters and setters become far more useful in more complex scenarios where you need to make additional choices based on the state of your object.

Note

For simplicity we’ve left out the optional parameters in the register_property<class, type> method call. These parameters are rpc_mode, usage, hint and hint_string. These can be used to further configure how properties are displayed and set on the Godot side.

Modern C++ compilers are able to infer the class and variable type and allow you to omit the <GDExample, float> part of our register_property method. We’ve had mixed experiences with this however.

Signals

Last but not least, signals fully work in GDNative as well. Having your module react to a signal given out by another object requires you to call connect on that object. We can’t think of a good example for our wobbling Godot icon, we would need to showcase a far more complete example.

This however is the required syntax:

NativeScript 1.1

NativeScript 1.0

  1. some_other_node->connect("the_signal", this, "my_method");
  1. some_other_node->connect("the_signal", owner, "my_method");

Note that you can only call my_method if you’ve previously registered it in your _register_methods method.

Having your object sending out signals is far more common. For our wobbling Godot icon we’ll do something silly just to show how it works. We’re going to emit a signal every time a second has passed and pass the new location along.

In our gdexample.h header file we just need to define a new member time_emit:

  1. ...
  2.     float time_passed;
  3.     float time_emit;
  4.     float amplitude;
  5. ...

The changes in gdexample.cpp are a bit more elaborate this time. First you’ll need to set time_emit = 0.0; in either our _init method or in our constructor. But the other two needed changes we’ll look at one by one.

In our _register_methods method we need to declare our signal and we do this as follows:

NativeScript 1.1

NativeScript 1.0

  1. void GDExample::_register_methods() {
  2.     register_method("_process", &GDExample::_process);
  3.     register_property<GDExample, float>("amplitude", &GDExample::amplitude, 10.0);
  4.     register_property<GDExample, float>("speed", &GDExample::set_speed, &GDExample::get_speed, 1.0);
  6.     register_signal<GDExample>((char *)"position_changed", "node", GODOT_VARIANT_TYPE_OBJECT, "new_pos", GODOT_VARIANT_TYPE_VECTOR2);
  7. }
  1. void GDExample::_register_methods() {
  2.     register_method((char *)"_process", &GDExample::_process);
  3.     register_property<GDExample, float>("amplitude", &GDExample::amplitude, 10.0);
  4.     register_property<GDExample, float>("speed", &GDExample::set_speed, &GDExample::get_speed, 1.0);
  6.     Dictionary args;
  7.     args[Variant("node")] = Variant(Variant::OBJECT);
  8.     args[Variant("new_pos")] = Variant(Variant::VECTOR2);
  9.     register_signal<GDExample>((char *)"position_changed", args);
  10. }

Here we see a nice improvement in the latest version of godot-cpp where our register_signal method can be a single call first taking the signals name, then having pairs of values specifying the parameter name and type of each parameter we’ll send along with this signal.

For NativeScript 1.0 we first build a dictionary in which we tell Godot about the types of arguments we will pass to our signal, and then register it.

Next we’ll need to change our _process method:

NativeScript 1.1

NativeScript 1.0

  1. void GDExample::_process(float delta) {
  2.     time_passed += speed * delta;
  4.     Vector2 new_position = Vector2(
  5.         amplitude + (amplitude * sin(time_passed * 2.0)),
  6.         amplitude + (amplitude * cos(time_passed * 1.5))
  7.     );
  9.     set_position(new_position);
  11.     time_emit += delta;
  12.     if (time_emit > 1.0) {
  13.         emit_signal("position_changed", this, new_position);
  15.         time_emit = 0.0;
  16.     }
  17. }
  1. void GDExample::_process(float delta) {
  2.     time_passed += speed * delta;
  4.     Vector2 new_position = Vector2(
  5.         amplitude + (amplitude * sin(time_passed * 2.0)),
  6.         amplitude + (amplitude * cos(time_passed * 1.5))
  7.     );
  9.     owner->set_position(new_position);
  11.     time_emit += delta;
  12.     if (time_emit > 1.0) {
  13.         Array args;
  14.         args.push_back(Variant(owner));
  15.         args.push_back(Variant(new_position));
  16.         owner->emit_signal("position_changed", args);
  18.         time_emit = 0.0;
  19.     }
  20. }

After a second has passed we emit our signal and reset our counter. Again in the new version of godot-cpp we can add our parameter values directly to emit_signal. In NativeScript 1.0 We first build an array of values and then call emit_signal.

Once compiled we can go into Godot and select our sprite node. On our Node tab we find our new signal and link it up by pressing connect. We’ve added a script on our main node and implemented our signal like this:

  1. extends Node
  3. func _on_Sprite_position_changed(node, new_pos):
  4.     print("The position of " + node.name + " is now " + str(new_pos))

Every second we simply output our position to the console.

NativeScript 1.1 vs NativeScript 1.0

So far in our example above there doesn’t seem to be a lot of difference between the old and new syntax. The class is defined slightly differently and we no longer use the owner member to call methods on the Godot side of our object. A lot of the improvements are hidden under the hood.

This example only deals with simple variables and simple methods. Especially once you start passing references to other objects or when you start calling methods that require more complex parameters, NativeScript 1.1 does start to show its benefits.

Next steps

The above is only a simple example, but we hope it shows you the basics. You can build upon this example to create full-fledged scripts to control nodes in Godot using C++.

You should be able to edit and recompile the plugin while the Godot editor remains open; just rerun the project after the library has finished building.