ConeTwistJoint

ConeTwistJoint

Inherits: Joint < Spatial < Node < Object

A twist joint between two 3D PhysicsBodies.

Description

The joint can rotate the bodies across an axis defined by the local x-axes of the Joint.

The twist axis is initiated as the X axis of the Joint.

Once the Bodies swing, the twist axis is calculated as the middle of the x-axes of the Joint in the local space of the two Bodies. See also Generic6DOFJoint.

Properties

float	bias	`0.3`
float	relaxation	`1.0`
float	softness	`0.8`
float	swing_span	`45.0`
float	twist_span	`180.0`

Methods

float	get_param ( Param param ) const
void	set_param ( Param param, float value )

Enumerations

enum Param:

PARAM_SWING_SPAN = 0 —- Swing is rotation from side to side, around the axis perpendicular to the twist axis.

The swing span defines, how much rotation will not get corrected along the swing axis.

Could be defined as looseness in the ConeTwistJoint.

If below 0.05, this behavior is locked.

PARAM_TWIST_SPAN = 1 —- Twist is the rotation around the twist axis, this value defined how far the joint can twist.

Twist is locked if below 0.05.

PARAM_BIAS = 2 —- The speed with which the swing or twist will take place.

The higher, the faster.

PARAM_SOFTNESS = 3 —- The ease with which the joint starts to twist. If it’s too low, it takes more force to start twisting the joint.
PARAM_RELAXATION = 4 —- Defines, how fast the swing- and twist-speed-difference on both sides gets synced.
PARAM_MAX = 5 —- Represents the size of the Param enum.

Property Descriptions

float bias

Default	`0.3`
Setter	set_param(value)
Getter	get_param()

The speed with which the swing or twist will take place.

The higher, the faster.

float relaxation

Default	`1.0`
Setter	set_param(value)
Getter	get_param()

Defines, how fast the swing- and twist-speed-difference on both sides gets synced.

float softness

Default	`0.8`
Setter	set_param(value)
Getter	get_param()

The ease with which the joint starts to twist. If it’s too low, it takes more force to start twisting the joint.

float swing_span

Default 45.0

Swing is rotation from side to side, around the axis perpendicular to the twist axis.

The swing span defines, how much rotation will not get corrected along the swing axis.

Could be defined as looseness in the ConeTwistJoint.

If below 0.05, this behavior is locked.

float twist_span

Default 180.0

Twist is the rotation around the twist axis, this value defined how far the joint can twist.

Twist is locked if below 0.05.

Method Descriptions

float get_param ( Param param ) const

void set_param ( Param param, float value )